1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
18 lines
438 B
Plaintext
18 lines
438 B
Plaintext
# H3 quad core 512MB SoC Headless WiFi/BT eMMC
|
|
BOARD_NAME="NanoPi Air"
|
|
BOARDFAMILY="sun8i"
|
|
BOOTCONFIG="nanopi_neo_air_defconfig"
|
|
#
|
|
MODULES="#w1-sunxi #w1-gpio #w1-therm #sunxi-cir hci_uart rfcomm hidp dhd g_serial"
|
|
MODULES_NEXT="brcmfmac g_serial"
|
|
DEFAULT_OVERLAYS="usbhost1 usbhost2"
|
|
CPUMIN="240000"
|
|
CPUMAX="912000"
|
|
#
|
|
BUILD_DESKTOP="no"
|
|
#
|
|
KERNEL_TARGET="default,next,dev"
|
|
CLI_TARGET="stretch,xenial:next"
|
|
#
|
|
CLI_BETA_TARGET="bionic:next"
|