e71d1560f0
* helios4: next branch use u-boot 2018
use new u-boot based on upstream 2018
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Tweak fancontrol configuration
Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.
URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: use upstream helios4 dts
Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.
URL:https://patchwork.kernel.org/patch/10449393/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Use boot-mvebu-next bootscript
Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Refer to
Commit 59af84c07c ("Helios4: Add SPI bootloader install feature
(#1126)")
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Bootscripts: Fixed boot-mvebu-next.cmd
The environment setting (armbianEnv.txt) is loaded to RAM located on
${load_addr} but the env import use wrong address (${pxefile_addr_r}).
bootargs still expect ${boot_interface} which carried over from boot-
marvell.cmd. Upstream's distro configuration use ${devtype} instead.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
80 lines
2.7 KiB
Batchfile
80 lines
2.7 KiB
Batchfile
# DO NOT EDIT THIS FILE
|
|
#
|
|
# Please edit /boot/armbianEnv.txt to set supported parameters
|
|
#
|
|
|
|
setenv load_addr "0x300000"
|
|
# default values
|
|
setenv rootdev "/dev/mmcblk0p1"
|
|
setenv rootfstype "ext4"
|
|
setenv verbosity "1"
|
|
setenv emmc_fix "off"
|
|
setenv ethaddr "00:50:43:84:fb:2f"
|
|
setenv eth1addr "00:50:43:25:fb:84"
|
|
setenv eth2addr "00:50:43:84:25:2f"
|
|
setenv eth3addr "00:50:43:0d:19:18"
|
|
|
|
echo "Boot script loaded from ${devtype}"
|
|
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt; then
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
setenv bootargs "console=ttyS0,115200 root=${rootdev} rootwait rootfstype=${rootfstype} ubootdev=${devtype} scandelay loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
|
|
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
|
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
|
|
|
fdt addr ${fdt_addr_r}
|
|
fdt resize 65536
|
|
for overlay_file in ${overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
|
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
for overlay_file in ${user_overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
|
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
if test "${overlay_error}" = "true"; then
|
|
echo "Error applying DT overlays, restoring original DT"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/rockchip/${fdtfile}
|
|
else
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/overlay/${overlay_prefix}-fixup.scr; then
|
|
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
|
echo "Applying user provided fixup script (fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
fi
|
|
|
|
# eMMC fix
|
|
if test "${emmc_fix}" = "on"; then
|
|
echo "Applying eMMC compatibility fix to the DT"
|
|
fdt rm /soc/internal-regs/sdhci@d8000/ cd-gpios
|
|
fdt set /soc/internal-regs/sdhci@d8000/ non-removable
|
|
fi
|
|
|
|
# SPI - SATA workaround
|
|
if test "${spi_workaround}" = "on"; then
|
|
echo "Applying SPI workaround to the DT"
|
|
fdt addr ${fdt_addr}
|
|
fdt resize
|
|
fdt set /soc/internal-regs/sata@e0000 status "disabled"
|
|
fdt set /soc/internal-regs/sata@a8000 status "disabled"
|
|
fdt set /soc/spi@10680 status "okay"
|
|
fdt set /soc/spi@10680/spi-flash@0 status "okay"
|
|
fi
|
|
|
|
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|