1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
37 lines
723 B
Diff
37 lines
723 B
Diff
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
|
|
index 1a044b17..0732d8c0 100644
|
|
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
|
|
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts
|
|
@@ -97,6 +97,10 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_sy8106a>;
|
|
+};
|
|
+
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
@@ -152,6 +156,20 @@
|
|
};
|
|
};
|
|
|
|
+&r_i2c {
|
|
+ status = "okay";
|
|
+
|
|
+ reg_sy8106a: regulator@65 {
|
|
+ compatible = "silergy,sy8106a";
|
|
+ reg = <0x65>;
|
|
+ regulator-name = "vdd-cpux";
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1400000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+};
|
|
+
|
|
&r_pio {
|
|
leds_r_opc: led_pins@0 {
|
|
pins = "PL10";
|