37c5cf652b
- saves one .dtsi file in patch/.../dt_uboot - I had the wrong name (missing `-u-boot` suffix) too so this fixes it too
111 lines
6.0 KiB
Plaintext
111 lines
6.0 KiB
Plaintext
# Rockchip RK3588 SoC octa core 4-16GB SoC 2x1GBe eMMC USB3 NVMe SATA 4G WiFi/BT HDMI DP HDMI-In RS232 RS485
|
|
declare -g BOARD_NAME="Mekotronics R58X-4G"
|
|
declare -g BOARD_VENDOR="mekotronics"
|
|
declare -g BOARDFAMILY="rockchip-rk3588"
|
|
declare -g BOARD_MAINTAINER=""
|
|
declare -g KERNEL_TARGET="edge,vendor"
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-edge-v12-linux.dtb" # same name for mainline and vendor
|
|
declare -g DISPLAY_MANAGER="wayland"
|
|
declare -g ASOUND_STATE="asound.state.rk3588hd"
|
|
declare -g BOOT_SOC="rk3588"
|
|
declare -g IMAGE_PARTITION_TABLE="gpt"
|
|
# Does not have a UEFI_EDK2_BOARD_ID
|
|
|
|
if [[ "${BRANCH}" == "vendor" || "${BRANCH}" == "legacy" ]]; then
|
|
display_alert "$BOARD" "vendor/legacy configuration applied for $BOARD / $BRANCH" "info"
|
|
declare -g BOOTCONFIG="mekotronics_r58x-rk3588_defconfig" # vendor u-boot; with NVMe and a DTS
|
|
# Source shared vendor configuration; it does BOOT_SCENARIO="spl-blobs" & hciattach - common to all vendor-kernel Meko's
|
|
source "${SRC}/config/sources/vendors/mekotronics/mekotronics-rk3588.conf.sh"
|
|
return 0 # this returns early so below code is only for current/edge branches
|
|
fi
|
|
|
|
# For current/edge branches:
|
|
display_alert "$BOARD" "applying mainline configuration for $BOARD / $BRANCH" "info"
|
|
declare -g BOOT_SCENARIO="tpl-blob-atf-mainline" # Mainline ATF
|
|
|
|
function post_family_config__mekor58x_4g_use_mainline_uboot() {
|
|
display_alert "$BOARD" "mainline u-boot overrides for $BOARD / $BRANCH" "info"
|
|
|
|
declare -g BOOTCONFIG="mekotronics-r58x-4g-rk3588_defconfig" # mainline
|
|
declare -g BOOTDELAY=1
|
|
declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
|
|
declare -g BOOTBRANCH="tag:v2026.04-rc2"
|
|
declare -g BOOTPATCHDIR="v2026.04"
|
|
declare -g BOOTDIR="u-boot-${BOARD}"
|
|
|
|
declare -g UBOOT_TARGET_MAP="BL31=bl31.elf ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
|
|
|
|
function write_uboot_platform() {
|
|
dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
|
|
}
|
|
|
|
declare -g PLYMOUTH="no" # Disable plymouth as that only causes more confusion
|
|
}
|
|
|
|
# "rockchip-common: boot NVMe, SATA, USB, then eMMC last before PXE"
|
|
# include/configs/rockchip-common.h
|
|
# On the meko r58-r58x_4g: mmc0 is eMMC; there is no SDcard reader
|
|
# Enumerating usb is pretty slow so do it after nvme
|
|
function pre_config_uboot_target__mekor58x_4g_patch_rockchip_common_boot_order() {
|
|
declare -a rockchip_uboot_targets=("nvme" "scsi" "usb" "mmc0" "pxe" "dhcp" "spi") # for future make-this-generic delight
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
|
|
sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
|
|
regular_git diff -u include/configs/rockchip-common.h || true
|
|
}
|
|
|
|
function pre_config_uboot_target__ekor58x_4g_patch_uboot_dtsi_for_ums() {
|
|
[[ "${BRANCH}" == "vendor" ]] && return 0 # Not for 'vendor' branch, which uses 2017.09 vendor u-boot from Radxa
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: add to u-boot dtsi for UMS" "info" # avoid a patch, just append to the dtsi file
|
|
# Append to the t6 u-boot dtsi file with stuff for enabling gadget/otg/peripheral mode
|
|
cat <<- EOD >> arch/arm/dts/rk3588-blueberry-edge-v12-linux-u-boot.dtsi
|
|
#include "rk3588-generic-u-boot.dtsi"
|
|
&u2phy0 { status = "okay"; };
|
|
&u2phy0_otg { status = "okay"; };
|
|
&usbdp_phy0 { status = "okay"; };
|
|
&usb_host0_xhci { dr_mode = "peripheral"; maximum-speed = "high-speed"; status = "okay"; };
|
|
EOD
|
|
}
|
|
|
|
function post_config_uboot_target__extra_configs_for_mekor58x_4g_mainline_environment_in_spi() {
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable board-specific configs" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_MISC
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable preboot & flash user LED in preboot" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_USE_PREBOOT
|
|
run_host_command_logged scripts/config --set-str CONFIG_PREBOOT "'led 4G on; sleep 0.1; led LAN on; sleep 0.1; led PWR on; sleep 0.1; led 4G off; sleep 0.1; led LAN off; sleep 0.1;'" # double quotes required due to run_host_command_logged's quirks
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable EFI debugging commands" "info"
|
|
run_host_command_logged scripts/config --enable CMD_EFIDEBUG
|
|
run_host_command_logged scripts/config --enable CMD_NVEDIT_EFI
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable more filesystems support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_BTRFS
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable more compression support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LZO
|
|
run_host_command_logged scripts/config --enable CONFIG_BZIP2
|
|
run_host_command_logged scripts/config --enable CONFIG_ZSTD
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable gpio LED support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LED
|
|
run_host_command_logged scripts/config --enable CONFIG_LED_GPIO
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable networking cmds" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_NFS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_WGET
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_DNS
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP_SACK
|
|
|
|
# UMS, RockUSB, gadget stuff
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable UMS/RockUSB gadget" "info"
|
|
declare -a enable_configs=("CONFIG_CMD_USB_MASS_STORAGE" "CONFIG_USB_GADGET" "USB_GADGET_DOWNLOAD" "CONFIG_USB_FUNCTION_ROCKUSB" "CONFIG_USB_FUNCTION_ACM" "CONFIG_CMD_ROCKUSB" "CONFIG_CMD_USB_MASS_STORAGE")
|
|
for config in "${enable_configs[@]}"; do
|
|
run_host_command_logged scripts/config --enable "${config}"
|
|
done
|
|
# Auto-enabled by the above, force off...
|
|
run_host_command_logged scripts/config --disable USB_FUNCTION_FASTBOOT
|
|
}
|