48e289e0d3
Make the script work silently when testing path options and report only the actual file being uploaded. Delete the duplicate iteration.
134 lines
5.0 KiB
Batchfile
134 lines
5.0 KiB
Batchfile
# DO NOT EDIT THIS FILE
|
|
#
|
|
# Please edit /boot/armbianEnv.txt to set supported parameters
|
|
#
|
|
|
|
setenv load_addr "0x45000000"
|
|
setenv overlay_error "false"
|
|
# default values
|
|
setenv verbosity "1"
|
|
setenv console "both"
|
|
setenv disp_mem_reserves "off"
|
|
setenv disp_mode "1920x1080p60"
|
|
setenv rootfstype "ext4"
|
|
setenv docker_optimizations "on"
|
|
setenv bootlogo "false"
|
|
setenv devnum "0"
|
|
setenv rootdev "/dev/mmcblk${devnum}p1"
|
|
setenv earlycon "off"
|
|
|
|
# Remember the default u-boot fdtfile
|
|
setenv deffdt_file ${fdtfile}
|
|
|
|
# Remember the default u-boot fdtdir
|
|
setenv deffdt_dir "${prefix}dtb"
|
|
if test "$fdtdir" = ""; then setenv fdtdir "${deffdt_dir}";fi
|
|
|
|
setenv vendor "allwinner"
|
|
|
|
# Print boot source
|
|
itest.b *0x28 == 0x00 && echo "U-boot loaded from SD"
|
|
itest.b *0x28 == 0x01 && echo "U-boot loaded from NAND"
|
|
itest.b *0x28 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
|
itest.b *0x28 == 0x03 && echo "U-boot loaded from SPI"
|
|
|
|
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
|
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
|
if test "${devtype}" = "mmc"; then
|
|
part uuid mmc ${devnum}:1 partuuid;
|
|
setenv devnum ${mmc_bootdev}
|
|
setenv rootdev "/dev/mmcblk${mmc_bootdev}p1"
|
|
fi
|
|
|
|
if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
# In this shell, we can only check the existence of the file.
|
|
# Make a check of reasonable ways to find the dtb file.
|
|
# Set the true value of the paths.
|
|
if test -e ${devtype} ${devnum} "${fdtdir}/${fdtfile}"; then
|
|
echo "Load fdt: ${fdtdir}/${fdtfile}"
|
|
else
|
|
echo "The file ${fdtfile} was not found in the path ${fdtdir}"
|
|
if test -e ${devtype} ${devnum} "${deffdt_dir}/${vendor}/${fdtfile}"; then
|
|
setenv fdtdir "${deffdt_dir}/${vendor}"
|
|
echo "Load fdt: ${fdtdir}/${fdtfile}"
|
|
else
|
|
if test -e ${devtype} ${devnum} "${deffdt_dir}/${vendor}/${deffdt_file}"; then
|
|
setenv fdtdir "${deffdt_dir}/${vendor}"
|
|
setenv fdtfile "${deffdt_file}"
|
|
echo "Load fdt: ${fdtdir}/${fdtfile}"
|
|
else
|
|
if test -e ${devtype} ${devnum} "${deffdt_dir}/${deffdt_file}"; then
|
|
setenv fdtdir "${deffdt_dir}"
|
|
setenv fdtfile "${deffdt_file}"
|
|
echo "Load fdt: ${fdtdir}/${fdtfile}"
|
|
fi
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
if test "${console}" = "display"; then setenv consoleargs "console=tty1"; fi
|
|
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
|
if test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
|
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
|
|
if test "${bootlogo}" = "true"; then
|
|
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
|
else
|
|
setenv consoleargs "splash=verbose ${consoleargs}"
|
|
fi
|
|
|
|
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} hdmi.audio=EDID:0 disp.screen0_output_mode=${disp_mode} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
|
|
|
if test "${disp_mem_reserves}" = "off"; then
|
|
setenv bootargs "${bootargs} sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16"
|
|
fi
|
|
|
|
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory"; fi
|
|
|
|
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
|
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}zImage
|
|
|
|
if test -e ${devtype} ${devnum} "${prefix}.next"; then
|
|
echo "Found mainline kernel configuration"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${fdtdir}/${fdtfile}
|
|
fdt addr ${fdt_addr_r}
|
|
fdt resize 65536
|
|
for overlay_file in ${overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${fdtdir}/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
|
|
echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
for overlay_file in ${user_overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
|
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
if test "${overlay_error}" = "true"; then
|
|
echo "Error applying DT overlays, restoring original DT"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${fdtdir}/${fdtfile}
|
|
else
|
|
if load ${devtype} ${devnum} ${load_addr} ${fdtdir}/overlay/${overlay_prefix}-fixup.scr; then
|
|
echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
|
|
echo "Applying user provided fixup script (fixup.scr)"
|
|
source ${load_addr}
|
|
fi
|
|
fi
|
|
bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
else
|
|
echo "Found legacy kernel configuration"
|
|
load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}script.bin
|
|
bootz ${kernel_addr_r} ${ramdisk_addr_r}
|
|
fi
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|