4850dbfbf9
* Add BOARD_VENDOR to board configs * Add BOARD_VENDOR to all board configuration files - Added BOARD_VENDOR variable to board configuration files - Using lowercase vendor slugs (e.g., friendlyelec, radxa, xunlong) - Set 'generic' for boards without clear vendor match - TV box files (.tvb) excluded as they have no clear vendor - Enables better board categorization and vendor-specific handling * Manual adjustements on top of AI matching * Drop doubled definition and add retroid vendor
76 lines
2.7 KiB
Plaintext
76 lines
2.7 KiB
Plaintext
# Rockchip RK3328 quad core 1GB 2 x GBE USB2 SPI
|
|
BOARD_NAME="Orange Pi R1 Plus LTS"
|
|
BOARD_VENDOR="xunlong"
|
|
BOARDFAMILY="rockchip64"
|
|
BOARD_MAINTAINER=""
|
|
BOOTCONFIG="orangepi_r1_plus_lts_rk3328_defconfig"
|
|
KERNEL_TARGET="current,edge"
|
|
KERNEL_TEST_TARGET="current"
|
|
DEFAULT_CONSOLE="serial"
|
|
MODULES="g_serial ledtrig_netdev"
|
|
MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu"
|
|
SERIALCON="ttyS2:1500000,ttyGS0"
|
|
HAS_VIDEO_OUTPUT="no"
|
|
BOOT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus-lts.dtb"
|
|
|
|
# SYS-TRIGGERED LEDs:
|
|
|
|
# NOTE: If LED funcionality is hard coded into an Armbian service for a board or family, it may override one or more of these settings.
|
|
# This will add a file /etc/armbian-leds.conf to the build to configure the three board LEDs.
|
|
# Green lan LED will flicker on lan0 RX. Green eth LED will flicker on eth0 RX.
|
|
# Red status led will display heartbeat pattern.
|
|
# For netdev trigger to work, ledtrig-netdev must be enabled in kernel.
|
|
# either in the board config file: e.g. MODULES="...,ledtrig_netdev"
|
|
# or in the family config file: e.g. CONFIG_LEDS_TRIGGER_NETDEV=y in linux-rockchip64-current.config
|
|
|
|
# Content:
|
|
function post_family_tweaks_bsp__enable_leds_orangepi_r1_plus_lts() {
|
|
display_alert "Creating board support LEDs config for orangepi-r1-plus-lts"
|
|
cat <<- EOF > "${destination}"/etc/armbian-leds.conf
|
|
[/sys/class/leds/orangepi-r1-plus-lts:green:lan]
|
|
trigger=netdev
|
|
interval=52
|
|
brightness=1
|
|
link=1
|
|
tx=0
|
|
rx=1
|
|
device_name=eth0
|
|
|
|
[/sys/class/leds/orangepi-r1-plus-lts:green:wan]
|
|
trigger=netdev
|
|
interval=52
|
|
brightness=1
|
|
link=1
|
|
tx=0
|
|
rx=1
|
|
device_name=lan0
|
|
|
|
[/sys/class/leds/orangepi-r1-plus-lts:red:status]
|
|
trigger=heartbeat
|
|
brightness=0
|
|
invert=0
|
|
EOF
|
|
|
|
if [[ $BRANCH == legacy ]]; then
|
|
|
|
# Bluetooth for most of others (custom patchram is needed only in legacy)
|
|
install -m 755 $SRC/packages/bsp/rk3399/brcm_patchram_plus_rk3399 $destination/usr/bin
|
|
cp $SRC/packages/bsp/rk3399/rk3399-bluetooth.service $destination/lib/systemd/system/
|
|
|
|
fi
|
|
|
|
# add a network rule to work-around RTL8153B initialization issue.
|
|
display_alert "Creating board support network rename rule to work-around RTL8153B initialization issue for orangepi-r1-plus-lts"
|
|
mkdir -p "${destination}"/etc/udev/rules.d/
|
|
cat <<- EOF > "${destination}"/etc/udev/rules.d/70-rename-lan.rules
|
|
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNEL=="end*", NAME="eth0"
|
|
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8152", KERNEL=="e*", NAME="lan0", \
|
|
RUN+="/usr/sbin/ip link set lan0 down", \
|
|
RUN+="/usr/sbin/ip link set eth0 down", \
|
|
RUN+="/usr/bin/sleep 5s ", \
|
|
RUN+="/usr/sbin/ip link set eth0 up", \
|
|
RUN+="/usr/bin/sleep 25s ", \
|
|
RUN+="/usr/sbin/ip link set lan0 up"
|
|
EOF
|
|
}
|