12f4e9f91b
- LED on gpio3 RK_PC5 is actually the WIFI led (not 4G) - 4G LED is routed into the mini-pci slot and not SoC-controllable
148 lines
7.5 KiB
Plaintext
148 lines
7.5 KiB
Plaintext
# Rockchip RK3588 SoC octa core 4-16GB SoC 2x1GBe eMMC USB3 NVMe SATA WiFi/BT HDMI DP HDMI-In RS232 RS485 LCD RotaryEncoder
|
|
declare -g BOARD_NAME="Mekotronics R58X-Pro"
|
|
declare -g BOARD_VENDOR="mekotronics"
|
|
declare -g BOARDFAMILY="rockchip-rk3588"
|
|
declare -g BOARD_MAINTAINER=""
|
|
declare -g KERNEL_TARGET="edge,vendor"
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-mekotronics-r58x-pro.dtb" # mainline name; see below for vendor
|
|
declare -g DISPLAY_MANAGER="wayland"
|
|
declare -g ASOUND_STATE="asound.state.rk3588hd"
|
|
declare -g BOOT_SOC="rk3588"
|
|
declare -g IMAGE_PARTITION_TABLE="gpt"
|
|
# Does not have a UEFI_EDK2_BOARD_ID
|
|
|
|
if [[ "${BRANCH}" == "vendor" || "${BRANCH}" == "legacy" ]]; then
|
|
display_alert "$BOARD" "vendor/legacy configuration applied for $BOARD / $BRANCH" "info"
|
|
declare -g BOOTCONFIG="mekotronics_r58x-rk3588_defconfig" # vendor u-boot; with NVMe and a DTS
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-edge-v12-maizhuo-linux.dtb" # different for vendor
|
|
# Source shared vendor configuration; it does BOOT_SCENARIO="spl-blobs" & hciattach - common to all vendor-kernel Meko's
|
|
source "${SRC}/config/sources/vendors/mekotronics/mekotronics-rk3588.conf.sh"
|
|
return 0 # this returns early so below code is only for current/edge branches
|
|
fi
|
|
|
|
# For current/edge branches:
|
|
display_alert "$BOARD" "applying mainline configuration for $BOARD / $BRANCH" "info"
|
|
declare -g BOOT_SCENARIO="tpl-blob-atf-mainline" # Mainline ATF
|
|
|
|
function post_family_config__meko_r58x_pro_use_mainline_uboot() {
|
|
display_alert "$BOARD" "mainline u-boot overrides for $BOARD / $BRANCH" "info"
|
|
|
|
declare -g BOOTCONFIG="mekotronics-r58x-pro-rk3588_defconfig" # mainline
|
|
declare -g BOOTDELAY=1
|
|
declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
|
|
declare -g BOOTBRANCH="tag:v2026.04-rc2"
|
|
declare -g BOOTPATCHDIR="v2026.04"
|
|
declare -g BOOTDIR="u-boot-${BOARD}"
|
|
|
|
declare -g UBOOT_TARGET_MAP="BL31=bl31.elf ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
|
|
|
|
function write_uboot_platform() {
|
|
dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
|
|
}
|
|
|
|
declare -g PLYMOUTH="no" # Disable plymouth as that only causes more confusion
|
|
}
|
|
|
|
# "rockchip-common: boot NVMe, SATA, USB, then eMMC last before PXE"
|
|
# include/configs/rockchip-common.h
|
|
# On the meko r58x_pro: mmc0 is eMMC; there is no SDcard reader @TODO yes there is
|
|
# Enumerating usb is pretty slow so do it after nvme
|
|
function pre_config_uboot_target__meko_r58x_pro_patch_rockchip_common_boot_order() {
|
|
declare -a rockchip_uboot_targets=("nvme" "scsi" "usb" "mmc0" "pxe" "dhcp" "spi") # for future make-this-generic delight
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
|
|
sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
|
|
regular_git diff -u include/configs/rockchip-common.h || true
|
|
}
|
|
|
|
function pre_config_uboot_target__meko_r58x_pro_patch_uboot_dtsi_for_ums() {
|
|
[[ "${BRANCH}" == "vendor" ]] && return 0 # Not for 'vendor' branch, which uses 2017.09 vendor u-boot from Radxa
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: add to u-boot dtsi for UMS" "info" # avoid a patch, just append to the dtsi file
|
|
# Append to the t6 u-boot dtsi file with stuff for enabling gadget/otg/peripheral mode
|
|
cat <<- EOD >> arch/arm/dts/rk3588-mekotronics-r58x-pro-u-boot.dtsi
|
|
#include "rk3588-generic-u-boot.dtsi"
|
|
&u2phy0 { status = "okay"; };
|
|
&u2phy0_otg { status = "okay"; };
|
|
&usbdp_phy0 { status = "okay"; };
|
|
&usb_host0_xhci { dr_mode = "peripheral"; maximum-speed = "high-speed"; status = "okay"; };
|
|
EOD
|
|
}
|
|
|
|
function post_config_uboot_target__extra_configs_for_meko_r58x_pro_mainline_environment_in_spi() {
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable board-specific configs" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_MISC
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable preboot & flash user LED in preboot" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_USE_PREBOOT
|
|
run_host_command_logged scripts/config --set-str CONFIG_PREBOOT "'led WIFI on; sleep 0.1; led LAN on; sleep 0.1; led PWR on; sleep 0.1; led WIFI off; sleep 0.1; led LAN off; sleep 0.1;'" # double quotes required due to run_host_command_logged's quirks
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable EFI debugging commands" "info"
|
|
run_host_command_logged scripts/config --enable CMD_EFIDEBUG
|
|
run_host_command_logged scripts/config --enable CMD_NVEDIT_EFI
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable more filesystems support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_BTRFS
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable more compression support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LZO
|
|
run_host_command_logged scripts/config --enable CONFIG_BZIP2
|
|
run_host_command_logged scripts/config --enable CONFIG_ZSTD
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable gpio LED support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LED
|
|
run_host_command_logged scripts/config --enable CONFIG_LED_GPIO
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable networking cmds" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_NFS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_WGET
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_DNS
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP_SACK
|
|
|
|
# UMS, RockUSB, gadget stuff
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable UMS/RockUSB gadget" "info"
|
|
declare -a enable_configs=("CONFIG_CMD_USB_MASS_STORAGE" "CONFIG_USB_GADGET" "USB_GADGET_DOWNLOAD" "CONFIG_USB_FUNCTION_ROCKUSB" "CONFIG_USB_FUNCTION_ACM" "CONFIG_CMD_ROCKUSB" "CONFIG_CMD_USB_MASS_STORAGE")
|
|
for config in "${enable_configs[@]}"; do
|
|
run_host_command_logged scripts/config --enable "${config}"
|
|
done
|
|
# Auto-enabled by the above, force off...
|
|
run_host_command_logged scripts/config --disable USB_FUNCTION_FASTBOOT
|
|
}
|
|
|
|
# Small systemd service and timer to drive the LCD display with the hour-minute of the current time.
|
|
# Deploy the script and the systemd service in the BSP. It'll be enabled below in the image.
|
|
function post_family_tweaks_bsp__meko_r58x_pro_lcd_clock_add_systemd_service() {
|
|
display_alert "Extension: ${EXTENSION}: ${BOARD}" "adding LCD clock service and timer to BSP" "info"
|
|
: "${destination:?destination is not set}"
|
|
|
|
cat <<- 'LCD_CLOCK_SYSTEMD_SERVICE' > "$destination"/lib/systemd/system/lcd-clock.service
|
|
[Unit]
|
|
Description=Update segment LCD clock display
|
|
ConditionPathExists=/sys/devices/platform/lcd_vk2c21/display
|
|
[Service]
|
|
Type=oneshot
|
|
ExecStart=bash -c 'echo " $(date +%%H)-$(date +%%M) " > /sys/devices/platform/lcd_vk2c21/display'
|
|
LCD_CLOCK_SYSTEMD_SERVICE
|
|
|
|
cat <<- 'LCD_CLOCK_SYSTEMD_TIMER' > "$destination"/lib/systemd/system/lcd-clock.timer
|
|
[Unit]
|
|
Description=Update segment LCD clock every minute
|
|
[Timer]
|
|
OnBootSec=5
|
|
OnCalendar=*-*-* *:*:00
|
|
AccuracySec=1s
|
|
[Install]
|
|
WantedBy=timers.target
|
|
LCD_CLOCK_SYSTEMD_TIMER
|
|
|
|
return 0
|
|
}
|
|
|
|
# Enable the service created in the BSP above.
|
|
function post_family_tweaks__meko_r58x_pro_lcd_clock_service_in_image() {
|
|
display_alert "Extension: ${EXTENSION}: ${BOARD}" "LCD clock timer in the image" "info"
|
|
chroot_sdcard systemctl --no-reload enable "lcd-clock.timer"
|
|
return 0
|
|
}
|