| .. |
|
aw-som-a20.csc
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
bananapi.conf
|
Remove Odroid N1 conf, adjust few board configs, remove deprecated command, bump with version
|
2018-08-14 19:12:51 +02:00 |
|
bananapim1plus.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
bananapim2.eos
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
bananapim2plus.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
bananapim2ultra.csc
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
bananapim2zero.csc
|
Add CSC target for Bananapi M2 zero
|
2018-02-15 10:31:01 +01:00 |
|
bananapim3.csc
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
bananapim64.csc
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
bananapipro.conf
|
Remove Odroid N1 conf, adjust few board configs, remove deprecated command, bump with version
|
2018-08-14 19:12:51 +02:00 |
|
beelinkx2.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
clearfogbase.conf
|
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
|
2018-08-22 13:26:06 +02:00 |
|
clearfogpro.conf
|
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
|
2018-08-22 13:26:06 +02:00 |
|
cubieboard2.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
cubieboard4.csc
|
Adjust Cubieboard4 .csc config
|
2018-07-23 11:39:18 +00:00 |
|
cubieboard.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
cubietruck.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
cubietruckplus.csc
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
cubox-i.conf
|
Adjust board config
|
2018-08-22 09:23:06 +02:00 |
|
dragonboard820c.csc
|
Disable Dragonboard820c kernel building. Moving it to CSC, no planned support.
|
2018-08-12 08:30:14 +02:00 |
|
espressobin.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
firefly-rk3399.wip
|
Adjusting board configs. RockPRO64, only board config, it doesn't work yet. Need some digging in ...
|
2018-08-17 13:08:55 +02:00 |
|
helios4.conf
|
Update helios4.conf
|
2018-08-22 13:29:07 +02:00 |
|
hummingbird.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
lamobo-r1.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
lepotato.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
lime2.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
lime-a10.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
lime-a33.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
lime-a64.wip
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
lime.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
melea1000.csc
|
Moving and renaming Nanopi K2 to CSC and adding Mele1000 as CSC target
|
2018-02-06 19:31:15 +01:00 |
|
micro.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
miqi.conf
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
mk808c.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
nanopct3plus.wip
|
Nanopi M3,Fire3, T3+ config adjustements
|
2018-07-24 14:06:33 +00:00 |
|
nanopct4.wip
|
RK3399 Fix wrong u-boot configuration for T4, use forked rkbin tools, upstream patches
|
2018-08-21 15:56:44 +02:00 |
|
nanopiair.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
nanopiduo.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
nanopifire3.wip
|
Nanopi M3,Fire3, T3+ config adjustements
|
2018-07-24 14:06:33 +00:00 |
|
nanopik1plus.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
nanopik2-s905.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
nanopim1.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
nanopim1plus2.eos
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
nanopim1plus.conf
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
nanopim3.wip
|
Nanopi M3,Fire3, T3+ config adjustements
|
2018-07-24 14:06:33 +00:00 |
|
nanopineo2.conf
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
nanopineo.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
nanopineocore2.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
nanopineoplus2.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
odroidc1.conf
|
Disable DEV target for Odroid C1
|
2018-08-01 22:38:13 +02:00 |
|
odroidc2.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
odroidxu4.conf
|
Adjust Odroid XU4 targets
|
2018-08-12 23:01:13 +02:00 |
|
olimex-som204-a20.csc
|
Update olinuxino BSP packages
|
2018-05-03 09:00:16 +03:00 |
|
olimex-som-a20.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
olinux-som-a13.csc
|
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
|
2018-07-23 14:51:41 +00:00 |
|
olinuxino-a13.csc
|
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
|
2018-07-23 14:51:41 +00:00 |
|
orangepi2.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepi-r1.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
orangepi.eos
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepilite2.wip
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
orangepilite.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
orangepimini.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
orangepione.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
orangepioneplus.wip
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
orangepipc2.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepipc.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepipcplus.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiplus2e.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiplus.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiprime.conf
|
Bump with version and adjust few board configs
|
2018-07-24 09:58:48 +00:00 |
|
orangepiwin.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
orangepizero.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepizeroplus2-h3.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepizeroplus2-h5.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
orangepizeroplus.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
pcduino2.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pcduino3.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pcduino3nano.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pine64.conf
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
pine64so.conf
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
pinebook-a64.conf
|
Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC
|
2018-06-19 19:37:42 +00:00 |
|
pineh64.wip
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
renegade.wip
|
Adjust board config
|
2018-08-22 11:14:19 +02:00 |
|
rock64.conf
|
Rock64 DEV sources and kernel config adjustement. Switching DEV u-boot branch to stock, since mainline is failing to build. http://ix.io/1fTi
|
2018-07-03 17:13:51 +00:00 |
|
rockpro64.wip
|
Moving RK3399 to Ayufan Repo. Known T4 regression = DVFS, DT adjustements needed ...
|
2018-08-17 15:39:13 +02:00 |
|
sunvell-r69.csc
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
teres-a64.wip
|
Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC
|
2018-06-19 19:37:42 +00:00 |
|
tinkerboard.conf
|
Board config adjustements and cleanup
|
2018-08-22 07:49:45 +02:00 |
|
topwise-a721.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
tritium-h3.csc
|
Adjust board config
|
2018-08-22 08:50:09 +02:00 |
|
tritium-h5.csc
|
Adjust board config
|
2018-08-22 08:50:09 +02:00 |
|
udoo-neo.eos
|
Changing U-boot to mainline, adding patches for dev (4.14.y). It boots but virtually nothing works except network ... moving Udoo Neo under deprecated. Only one sample exists and little to no users around.
|
2018-01-19 20:04:17 +01:00 |
|
udoo.conf
|
Adjustement to Friendly ARM PC T3, upstream patches for Udoo, disabling its default kernel for building
|
2018-08-20 19:49:06 +02:00 |
|
z28pro.csc
|
Adjust board config
|
2018-07-23 09:09:50 +02:00 |
