armbian-build/patch/kernel/archive/sunxi-5.13/wifi-orangepi-pc-plus-pwrseq.patch
Igor Pečovnik e21e82b546
Upgrading sunxi, sunxi64, imx6, jetson-nano, mvebu and mvebu64 EDGE to 5.13 (#3042)
* Upgrading sunxi and sunxi64 EDGE to 5.13

Both variants tested for building

* Bump imx6 to 5.13.y

Tested

* Bump Jetson nano kernel to 5.13.y

* Move mvebu and mvebu64 edge to 5.13.y
2021-07-21 00:46:51 +02:00

25 lines
708 B
Diff

diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
index 8b93f5c..9011356 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -51,6 +51,11 @@
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
ethernet1 = &rtl8189ftv;
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
+ };
};
&mmc1 {
@@ -57,6 +57,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";