..
aw-som-a20.csc
Moving sunxi-next to 4.17.y ( #1049 )
2018-07-17 15:53:30 +02:00
bananapi.conf
Remove Odroid N1 conf, adjust few board configs, remove deprecated command, bump with version
2018-08-14 19:12:51 +02:00
bananapim1plus.csc
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
bananapim2.eos
Adjust build targets
2018-08-21 20:27:53 +02:00
bananapim2plus.conf
Adjust board build targets
2018-08-21 12:52:13 +02:00
bananapim2ultra.csc
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
bananapim2zero.csc
Add CSC target for Bananapi M2 zero
2018-02-15 10:31:01 +01:00
bananapim3.csc
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
bananapim64.csc
Adjust build targets
2018-08-21 20:27:53 +02:00
bananapipro.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
beelinkx2.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
clearfogbase.conf
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
2018-08-22 13:26:06 +02:00
clearfogpro.conf
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
2018-08-22 13:26:06 +02:00
cubieboard2.eos
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
2018-01-25 19:55:52 +01:00
cubieboard4.csc
Adjust Cubieboard4 .csc config
2018-07-23 11:39:18 +00:00
cubieboard.eos
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
cubietruck.conf
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
cubietruckplus.csc
Moving sunxi-next to 4.17.y ( #1049 )
2018-07-17 15:53:30 +02:00
cubox-i.conf
Adjust board config
2018-08-22 09:23:06 +02:00
espressobin.conf
Espressobin default patches cleanup and kernel configuration update
2018-08-26 19:17:30 +02:00
firefly-rk3399.csc
[maintanace] Changing Firefly RK3399 to CSC target and build images. Enable nightly CLI builds for RK3399 boards.
2018-10-26 17:08:05 +02:00
helios4.conf
Update helios4.conf
2018-08-22 13:29:07 +02:00
hummingbird.csc
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
lamobo-r1.eos
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
lepotato.conf
Meson64 enable dev building, update dev patches
2018-10-30 21:08:30 -04:00
lime2.conf
Adjust build targets
2018-08-21 20:27:53 +02:00
lime-a10.eos
Adjust board configs
2018-08-22 16:13:42 +02:00
lime-a33.csc
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
lime-a64.wip
Board config adjustements and cleanup
2018-08-22 07:49:45 +02:00
lime.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
melea1000.csc
Moving and renaming Nanopi K2 to CSC and adding Mele1000 as CSC target
2018-02-06 19:31:15 +01:00
micro.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
miqi.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
mk808c.csc
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
nanopct3.conf
Add 1G variant of Nanopc T3 https://github.com/friendlyarm/linux-3.4.y/issues/3#issuecomment-419619961
2018-09-08 09:58:30 +02:00
nanopct3plus.conf
Add 1G variant of Nanopc T3 https://github.com/friendlyarm/linux-3.4.y/issues/3#issuecomment-419619961
2018-09-08 09:58:30 +02:00
nanopct4.conf
[maintanace] Changing Firefly RK3399 to CSC target and build images. Enable nightly CLI builds for RK3399 boards.
2018-10-26 17:08:05 +02:00
nanopiair.conf
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
nanopiduo.conf
Adjust build targets
2018-08-21 20:27:53 +02:00
nanopifire3.conf
Fixed eMMC install on FriendlyARM NanoPC T3+, adjusted docker dependencies, new boot script with SD card priority booting.
2018-09-06 20:22:51 +02:00
nanopik1plus.conf
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
nanopik2-s905.conf
Meson64 enable dev building, update dev patches
2018-10-30 21:08:30 -04:00
nanopim1.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
nanopim1plus2.eos
Moving sunxi-next to 4.17.y ( #1049 )
2018-07-17 15:53:30 +02:00
nanopim1plus.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
nanopim3.eos
Fixed eMMC install on FriendlyARM NanoPC T3+, adjusted docker dependencies, new boot script with SD card priority booting.
2018-09-06 20:22:51 +02:00
nanopim4.conf
[maintanace] Changing Firefly RK3399 to CSC target and build images. Enable nightly CLI builds for RK3399 boards.
2018-10-26 17:08:05 +02:00
nanopineo2.conf
Board config adjustements and cleanup
2018-08-22 07:49:45 +02:00
nanopineo4.conf
[maintanace] Changing Firefly RK3399 to CSC target and build images. Enable nightly CLI builds for RK3399 boards.
2018-10-26 17:08:05 +02:00
nanopineo.conf
Add an upstream patch and adjust board config
2018-09-01 19:04:49 +02:00
nanopineocore2.conf
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
nanopineoplus2.conf
Adjust build targets
2018-08-21 20:27:53 +02:00
odroidc1.eos
[odroid c1] Move to 4.19.y and change its status to EOS. Left in a working state: http://ix.io/1pZa
2018-10-25 12:28:35 +02:00
odroidc2.conf
Meson64 enable dev building, update dev patches
2018-10-30 21:08:30 -04:00
odroidxu4.conf
Adjust Odroid XU4 targets
2018-08-12 23:01:13 +02:00
olimex-som204-a20.csc
Update olinuxino BSP packages
2018-05-03 09:00:16 +03:00
olimex-som-a20.csc
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
olinux-som-a13.csc
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
2018-07-23 14:51:41 +00:00
olinuxino-a13.csc
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
2018-07-23 14:51:41 +00:00
olinuxino-a64.wip
add olinuxino-a64.wip and fixes for it
2018-09-09 09:59:26 -04:00
orangepi2.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepi-r1.conf
Adjust build targets
2018-08-21 20:27:53 +02:00
orangepi.eos
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepilite2.wip
request a nightly build for orange pi lite2
2018-09-18 09:48:25 +08:00
orangepilite.conf
Adjust board build targets
2018-08-21 12:52:13 +02:00
orangepimini.eos
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
orangepione.conf
Adjust board build targets
2018-08-21 12:52:13 +02:00
orangepioneplus.wip
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
orangepipc2.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepipc.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepipcplus.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepiplus2e.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepiplus.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepiprime.conf
Bump with version and adjust few board configs
2018-07-24 09:58:48 +00:00
orangepiwin.conf
Adjust build targets
2018-08-21 20:27:53 +02:00
orangepizero.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepizeroplus2-h3.conf
Adjust board configurations
2018-08-21 19:53:33 +02:00
orangepizeroplus2-h5.conf
Adjust board build targets
2018-08-21 12:52:13 +02:00
orangepizeroplus.conf
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
pcduino2.eos
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
2018-01-25 19:55:52 +01:00
pcduino3.eos
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
2018-01-25 19:55:52 +01:00
pcduino3nano.eos
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
2018-01-25 19:55:52 +01:00
pine64.conf
Add AUFS4.18, adjust several board configs
2018-08-23 15:13:12 +02:00
pine64so.conf
Add AUFS4.18, adjust several board configs
2018-08-23 15:13:12 +02:00
pinebook-a64.conf
Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC
2018-06-19 19:37:42 +00:00
pineh64.wip
Reverting sunxi/sunxi64 NEXT to 4.14. ( #1087 )
2018-08-21 10:41:10 +02:00
renegade.conf
Creating new family rockchip64. 3288 and 3399 was merged in, except Nanopi which stays in RK3399 family with sources attached to FA repository until we manage to join that in. Enabled Nanopc T4, Nanopi M4, Renegade. Tested on Rock64 and Nanopc T4.
2018-08-26 14:14:14 +02:00
rock64.conf
Update rock64.conf
2018-08-26 14:19:58 +02:00
rockpro64.wip
Creating new family rockchip64. 3288 and 3399 was merged in, except Nanopi which stays in RK3399 family with sources attached to FA repository until we manage to join that in. Enabled Nanopc T4, Nanopi M4, Renegade. Tested on Rock64 and Nanopc T4.
2018-08-26 14:14:14 +02:00
sunvell-r69.csc
Moving sunxi-next to 4.17.y ( #1049 )
2018-07-17 15:53:30 +02:00
teres-a64.wip
Add patch for lid suspend resume on Teres, higher clock for H6 boards
2018-08-28 15:33:29 +02:00
tinkerboard.conf
Creating new family rockchip64. 3288 and 3399 was merged in, except Nanopi which stays in RK3399 family with sources attached to FA repository until we manage to join that in. Enabled Nanopc T4, Nanopi M4, Renegade. Tested on Rock64 and Nanopc T4.
2018-08-26 14:14:14 +02:00
topwise-a721.csc
Introduce BOARDFAMILY and base LINUXFAMILY on this
2017-11-26 23:05:18 +01:00
tritium-h3.csc
Adjust board config
2018-08-22 08:50:09 +02:00
tritium-h5.csc
Adjust board config
2018-08-22 08:50:09 +02:00
udoo-neo.eos
Changing U-boot to mainline, adding patches for dev (4.14.y). It boots but virtually nothing works except network ... moving Udoo Neo under deprecated. Only one sample exists and little to no users around.
2018-01-19 20:04:17 +01:00
udoo.eos
[general] Move several boards to EOS section.
2018-10-26 15:51:51 +02:00
z28pro.csc
[csc board] adjust targets
2018-10-27 15:51:53 +02:00
e72ddf2808