| .. |
|
aw-som-a20.csc
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
bananapi.conf
|
Remove Odroid N1 conf, adjust few board configs, remove deprecated command, bump with version
|
2018-08-14 19:12:51 +02:00 |
|
bananapim1plus.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
bananapim2.eos
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
bananapim2plus.conf
|
[ bananapim2plus ] set proper u-boot config
|
2019-04-25 19:35:00 +02:00 |
|
bananapim2ultra.csc
|
Update bananapim2ultra.csc
|
2019-04-29 08:02:33 +02:00 |
|
bananapim2zero.csc
|
[ sunxi-next ] u-boot patches adjustement
|
2019-04-09 23:03:57 +02:00 |
|
bananapim3.csc
|
[ board config ] Manipulating build target due to DEV-NEXT changes
|
2019-01-09 23:43:30 +01:00 |
|
bananapim64.csc
|
[ board config ] Manipulating build target due to DEV-NEXT changes
|
2019-01-09 23:43:30 +01:00 |
|
bananapipro.eos
|
[general] Move several boards to EOS section.
|
2018-10-26 15:51:51 +02:00 |
|
bananapir2.csc
|
[bugfix] add missing file
|
2018-11-08 18:56:59 +01:00 |
|
beelinkx2.tvb
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
clearfogbase.conf
|
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
|
2018-08-22 13:26:06 +02:00 |
|
clearfogpro.conf
|
MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets
|
2018-08-22 13:26:06 +02:00 |
|
cubieboard2.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
cubieboard4.csc
|
[ general ] Attach Realtek 8811, 8812, 8814 and 8821 drivers source, remove our old patches, adjust configs, tested on all combinations
|
2019-02-07 15:24:06 +01:00 |
|
cubieboard.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
cubietruck.conf
|
Reverting sunxi/sunxi64 NEXT to 4.14. (#1087)
|
2018-08-21 10:41:10 +02:00 |
|
cubietruckplus.csc
|
Moving sunxi-next to 4.17.y (#1049)
|
2018-07-17 15:53:30 +02:00 |
|
cubox-i.conf
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
espressobin.conf
|
[espressobin] Cleanup and bump to 4.19.y
|
2018-11-05 13:26:40 +01:00 |
|
firefly-rk3399.csc
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
helios4.conf
|
[ helios4 ] Add correct cesa module in /etc/modules
|
2019-01-03 17:31:05 +08:00 |
|
hummingbird.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
lamobo-r1.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
lepotato.conf
|
[ meson64 ] build only NEXT kernel images, disabling nightly for a while
|
2019-01-11 19:14:01 +01:00 |
|
lime2.conf
|
Adjust build targets
|
2018-08-21 20:27:53 +02:00 |
|
lime-a10.eos
|
Adjust board configs
|
2018-08-22 16:13:42 +02:00 |
|
lime-a33.csc
|
[general] Move several boards to EOS section.
|
2018-10-26 15:51:51 +02:00 |
|
lime-a64.conf
|
Enable few more targets, move Lime64 to supported
|
2019-01-11 08:27:04 +01:00 |
|
lime.eos
|
[general] Move several boards to EOS section.
|
2018-10-26 15:51:51 +02:00 |
|
melea1000.csc
|
Moving and renaming Nanopi K2 to CSC and adding Mele1000 as CSC target
|
2018-02-06 19:31:15 +01:00 |
|
micro.eos
|
[general] Move several boards to EOS section.
|
2018-10-26 15:51:51 +02:00 |
|
miqi.eos
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
mk808c.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
nanopct3.conf
|
[ buildscript ] Improve serial console(s) handling
|
2018-12-12 19:13:50 +01:00 |
|
nanopct3plus.conf
|
[ buildscript ] Improve serial console(s) handling
|
2018-12-12 19:13:50 +01:00 |
|
nanopct4.conf
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
nanopi-r1.conf
|
[ nanopi-r1 ] enable second USB port
|
2019-04-20 12:19:12 +02:00 |
|
nanopiair.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
nanopiduo2.conf
|
Add Nanopi Duo2 and Nanopi R1 with one patch, rename to .conf since support level is the same as on all H3 boards
|
2019-04-19 18:34:38 +02:00 |
|
nanopiduo.conf
|
Add Nanopi Duo2 and Nanopi R1 with one patch, rename to .conf since support level is the same as on all H3 boards
|
2019-04-19 18:34:38 +02:00 |
|
nanopifire3.conf
|
[ buildscript ] Improve serial console(s) handling
|
2018-12-12 19:13:50 +01:00 |
|
nanopik1plus.conf
|
Nanopi boards - set consistent naming
|
2019-04-19 19:58:08 +02:00 |
|
nanopik2-s905.conf
|
Nanopi boards - set consistent naming
|
2019-04-19 19:58:08 +02:00 |
|
nanopim1.eos
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
nanopim1plus.eos
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
nanopim3.eos
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
nanopim4.conf
|
Nanopi boards - set consistent naming
|
2019-04-19 19:58:08 +02:00 |
|
nanopineo2.conf
|
[ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical
|
2018-11-21 13:48:13 +01:00 |
|
nanopineo4.conf
|
Nanopi boards - set consistent naming
|
2019-04-19 19:58:08 +02:00 |
|
nanopineo.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
nanopineocore2.conf
|
[ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical
|
2018-11-21 13:48:13 +01:00 |
|
nanopineoplus2.conf
|
Nanopi boards - set consistent naming
|
2019-04-19 19:58:08 +02:00 |
|
odroidc1.eos
|
[odroid c1] Move to 4.19.y and change its status to EOS. Left in a working state: http://ix.io/1pZa
|
2018-10-25 12:28:35 +02:00 |
|
odroidc2.conf
|
[ general ] disable beta images: deprecated or temporally broken.
|
2019-05-04 20:17:53 +02:00 |
|
odroidn2.conf
|
[ Odroid N2 ] Added Odroid N2 with mods necessary to build from sources. Made a few tests builds ... it works at least as good as stock.
|
2019-05-10 10:27:01 +02:00 |
|
odroidxu4.conf
|
[ odroidxu4 ] Reverting NEXT back to stock 4.14.y due to many troubles, DEV = 4.19.y
|
2019-01-18 20:10:35 +01:00 |
|
olimex-som204-a20.csc
|
[ general ] disable beta images: deprecated or temporally broken.
|
2019-05-04 20:17:53 +02:00 |
|
olimex-som-a20.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
olinux-som-a13.csc
|
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
|
2018-07-23 14:51:41 +00:00 |
|
olinuxino-a13.csc
|
Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES
|
2018-07-23 14:51:41 +00:00 |
|
orangepi2.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepi3.wip
|
re-enable beta buid for H6s
|
2019-05-07 21:03:40 -04:00 |
|
orangepi-r1.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
orangepi-rk3399.wip
|
initial commit for orangepi-rk3399.wip
|
2018-12-24 11:06:59 -05:00 |
|
orangepi.eos
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepilite2.wip
|
re-enable beta buid for H6s
|
2019-05-07 21:03:40 -04:00 |
|
orangepilite.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
orangepimini.eos
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
orangepione.conf
|
Adjust board build targets
|
2018-08-21 12:52:13 +02:00 |
|
orangepioneplus.wip
|
re-enable beta buid for H6s
|
2019-05-07 21:03:40 -04:00 |
|
orangepipc2.conf
|
[ sunxi / sunxi64 ] Patches cleanup, config cleanup, board config cleanup, disabling broken UART1 patch for Lite+/One+ ... should be fine in 5.1.y when we get there.
|
2019-04-28 09:02:55 +02:00 |
|
orangepipc.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepipcplus.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiplus2e.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiplus.conf
|
Adjust board configurations
|
2018-08-21 19:53:33 +02:00 |
|
orangepiprime.conf
|
[ sunxi / sunxi64 ] Patches cleanup, config cleanup, board config cleanup, disabling broken UART1 patch for Lite+/One+ ... should be fine in 5.1.y when we get there.
|
2019-04-28 09:02:55 +02:00 |
|
orangepiwin.conf
|
[ board config ] Manipulating build target due to DEV-NEXT changes
|
2019-01-09 23:43:30 +01:00 |
|
orangepizero.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
orangepizeroplus2-h3.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
orangepizeroplus2-h5.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
orangepizeroplus.conf
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
pcduino2.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pcduino3.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pcduino3nano.eos
|
Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ...
|
2018-01-25 19:55:52 +01:00 |
|
pine64.conf
|
[ general ] disable beta images: deprecated or temporally broken.
|
2019-05-04 20:17:53 +02:00 |
|
pine64so.conf
|
add nightly build targets for pine64so (#1365)
|
2019-05-09 06:40:19 +02:00 |
|
pinebook-a64.conf
|
allow DEV branch for Pinebook
|
2019-03-14 16:54:34 -04:00 |
|
pineh64.wip
|
enable Beta for PineH64
|
2019-05-08 10:34:22 -04:00 |
|
renegade.conf
|
Build dev nightly images for Renegade
|
2019-03-21 18:05:48 +01:00 |
|
rock64.conf
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
rockpi-4b.wip
|
add RockPi4B nightly build
|
2019-04-11 21:35:06 -04:00 |
|
rockpro64.conf
|
add RockPro nightly build
|
2019-04-11 21:38:10 -04:00 |
|
sunvell-r69.csc
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
teres-a64.wip
|
[ board config ] Manipulating build target due to DEV-NEXT changes
|
2019-01-09 23:43:30 +01:00 |
|
tinkerboard.conf
|
[ general ] disable beta images: deprecated or temporally broken.
|
2019-05-04 20:17:53 +02:00 |
|
topwise-a721.csc
|
Introduce BOARDFAMILY and base LINUXFAMILY on this
|
2017-11-26 23:05:18 +01:00 |
|
tritium-h3.csc
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
tritium-h5.csc
|
[ sunxi next ] Fixed thermal throtling for H5 devices and removed (deprecated) individual CPU speed settings from board config. Tested on H3 and H5 devices - it seems to work correctly now. https://forum.armbian.com/topic/2869-armbian-for-orangepi-pc2-allwinner-h5/?do=findComment&comment=76886
|
2019-04-12 11:56:06 +02:00 |
|
udoo.eos
|
Where a board config uses a modern kernel and is already using
|
2018-11-17 19:25:46 +11:00 |
|
xt-q8l-v10.tvb
|
[ general ] TVboxes configurations are getting its own category "tvb" @150balbes Moving current three boxes we have in there.
|
2018-12-06 17:43:27 +01:00 |
|
z28pro.tvb
|
[ general ] TVboxes configurations are getting its own category "tvb" @150balbes Moving current three boxes we have in there.
|
2018-12-06 17:43:27 +01:00 |
