enoch/armbian-build
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
283acedbf2
armbian-build/config/boards
History
Andrei Laperie d84a080950 Orange Pi R1 - set BOOTCONFIG to orangepi_r1_defconfig 
configuration file for Orange Pi R1 was referring to Pi Zero as
BOOTCONFIG - As a result wrong device tree file was used which
made some of the hardware features unavailable or configuired
incorrectly
2019-02-19 06:50:44 +00:00
..
aw-som-a20.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
bananapi.conf Remove Odroid N1 conf, adjust few board configs, remove deprecated command, bump with version 2018-08-14 19:12:51 +02:00
bananapim1plus.csc
bananapim2.eos Adjust build targets 2018-08-21 20:27:53 +02:00
bananapim2plus.conf Adjust board build targets 2018-08-21 12:52:13 +02:00
bananapim2ultra.csc [ K4.4 upstream patches ] and a small change to CSC board config 2019-02-09 19:31:03 +01:00
bananapim2zero.csc Add CSC target for Bananapi M2 zero 2018-02-15 10:31:01 +01:00
bananapim3.csc [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
bananapim64.csc [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
bananapipro.eos [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
bananapir2.csc [bugfix] add missing file 2018-11-08 18:56:59 +01:00
beelinkx2.tvb [ general ] TVboxes configurations are getting its own category "tvb" @150balbes Moving current three boxes we have in there. 2018-12-06 17:43:27 +01:00
clearfogbase.conf MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets 2018-08-22 13:26:06 +02:00
clearfogpro.conf MVEBZ default upstream patches, config ajdustement, remove deprecated patches, adjusted build targets 2018-08-22 13:26:06 +02:00
cubieboard2.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
cubieboard4.csc [ general ] Attach Realtek 8811, 8812, 8814 and 8821 drivers source, remove our old patches, adjust configs, tested on all combinations 2019-02-07 15:24:06 +01:00
cubieboard.eos
cubietruck.conf Reverting sunxi/sunxi64 NEXT to 4.14. (#1087) 2018-08-21 10:41:10 +02:00
cubietruckplus.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
cubox-i.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
espressobin.conf [espressobin] Cleanup and bump to 4.19.y 2018-11-05 13:26:40 +01:00
firefly-rk3399.csc Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
helios4.conf [ helios4 ] Add correct cesa module in /etc/modules 2019-01-03 17:31:05 +08:00
hummingbird.csc
lamobo-r1.eos
lepotato.conf [ meson64 ] build only NEXT kernel images, disabling nightly for a while 2019-01-11 19:14:01 +01:00
lime2.conf Adjust build targets 2018-08-21 20:27:53 +02:00
lime-a10.eos Adjust board configs 2018-08-22 16:13:42 +02:00
lime-a33.csc [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
lime-a64.conf Enable few more targets, move Lime64 to supported 2019-01-11 08:27:04 +01:00
lime.eos [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
melea1000.csc Moving and renaming Nanopi K2 to CSC and adding Mele1000 as CSC target 2018-02-06 19:31:15 +01:00
micro.eos [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
miqi.eos Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
mk808c.csc
nanopct3.conf [ buildscript ] Improve serial console(s) handling 2018-12-12 19:13:50 +01:00
nanopct3plus.conf [ buildscript ] Improve serial console(s) handling 2018-12-12 19:13:50 +01:00
nanopct4.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
nanopiair.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
nanopiduo.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
nanopifire3.conf [ buildscript ] Improve serial console(s) handling 2018-12-12 19:13:50 +01:00
nanopik1plus.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
nanopik2-s905.conf [ meson64 ] also add this oney 2019-01-11 19:16:11 +01:00
nanopim1.eos [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
nanopim1plus2.eos Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopim1plus.eos [general] Move several boards to EOS section. 2018-10-26 15:51:51 +02:00
nanopim3.eos Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
nanopim4.conf Limit RK3399 boards with crappy powering to 1.8GHz by default 2018-12-07 21:09:57 +01:00
nanopineo2.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
nanopineo4.conf Limit RK3399 boards with crappy powering to 1.8GHz by default 2018-12-07 21:09:57 +01:00
nanopineo.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
nanopineocore2.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
nanopineoplus2.conf [ sunxi-dev & general ] Remove deprecated patch, add regulator to Neo2 v1.0, set serial console to default where this is logical 2018-11-21 13:48:13 +01:00
odroidc1.eos [odroid c1] Move to 4.19.y and change its status to EOS. Left in a working state: http://ix.io/1pZa 2018-10-25 12:28:35 +02:00
odroidc2.conf Update odroidc2.conf 2019-01-21 22:36:23 -05:00
odroidxu4.conf [ odroidxu4 ] Reverting NEXT back to stock 4.14.y due to many troubles, DEV = 4.19.y 2019-01-18 20:10:35 +01:00
olimex-som204-a20.csc Update olinuxino BSP packages 2018-05-03 09:00:16 +03:00
olimex-som-a20.csc
olinux-som-a13.csc Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES 2018-07-23 14:51:41 +00:00
olinuxino-a13.csc Disable broken sun5i default kernel builds and enable csc rebuilding only when defined in REBUILD_IMAGES 2018-07-23 14:51:41 +00:00
orangepi2.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepi-r1.conf Orange Pi R1 - set BOOTCONFIG to orangepi_r1_defconfig 2019-02-19 06:50:44 +00:00
orangepi-rk3399.wip initial commit for orangepi-rk3399.wip 2018-12-24 11:06:59 -05:00
orangepi.eos Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepilite2.wip add NEXT to orangepioneplus/orangepilite2 2019-01-09 10:14:05 -05:00
orangepilite.conf Adjust board build targets 2018-08-21 12:52:13 +02:00
orangepimini.eos
orangepione.conf Adjust board build targets 2018-08-21 12:52:13 +02:00
orangepioneplus.wip add NEXT to orangepioneplus/orangepilite2 2019-01-09 10:14:05 -05:00
orangepipc2.conf [sunxi-dev] Adjusted patchset. Tested on H3, H5, A64, A83T, H6, ... focused only on basic features such as dvfs, hdmi, ... Kernel sources are switched to @megous and many patches were taken from @anarsoul branch, mostly regarding Pinebook/A64 which will take some time to get upstream. It's a mess which will be eventually sorted out or merged up. 2018-11-15 14:43:32 +01:00
orangepipc.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepipcplus.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepiplus2e.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepiplus.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepiprime.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
orangepiwin.conf [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
orangepizero.conf [ bugfix ] Fixing default Chromium preferences file https://forum.armbian.com/topic/3327-asus-tinkerboard/?do=findComment&comment=65807 and adding optional DEFAULT_CONSOLE variable which can override default console settings per board 2018-11-15 19:03:57 +01:00
orangepizeroplus2-h3.conf Adjust board configurations 2018-08-21 19:53:33 +02:00
orangepizeroplus2-h5.conf Adjust board build targets 2018-08-21 12:52:13 +02:00
orangepizeroplus.conf [ orangepizeroplus ] add default serial console, adjust cpu min/max 2018-11-25 20:59:59 +01:00
pcduino2.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pcduino3.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pcduino3nano.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pine64.conf [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
pine64so.conf [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
pinebook-a64.conf [ Pinebook ] Change targets to mainline only 2019-01-10 09:57:17 +01:00
pineh64.wip [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
renegade.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
rock64.conf Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
rockpi-4b.wip fix RockPi-4B naming + fix vcc5v0_host gpio pin 2019-01-01 19:37:27 -05:00
rockpro64.conf [ board configs ] Moving Rock64PRO under supported and adjusting description(s) 2018-12-03 16:20:44 +01:00
sunvell-r69.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
teres-a64.wip [ board config ] Manipulating build target due to DEV-NEXT changes 2019-01-09 23:43:30 +01:00
tinkerboard.conf Enable another nightly builds 2018-12-19 10:43:44 +01:00
topwise-a721.csc
tritium-h3.csc Enabling more targets 2019-01-10 10:21:36 +01:00
tritium-h5.csc [ tritium-h5 ] enable analog-codec 2018-12-12 11:38:34 -05:00
udoo.eos Where a board config uses a modern kernel and is already using 2018-11-17 19:25:46 +11:00
xt-q8l-v10.tvb [ general ] TVboxes configurations are getting its own category "tvb" @150balbes Moving current three boxes we have in there. 2018-12-06 17:43:27 +01:00
z28pro.tvb [ general ] TVboxes configurations are getting its own category "tvb" @150balbes Moving current three boxes we have in there. 2018-12-06 17:43:27 +01:00