enoch/armbian-build
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
1a12994e79
armbian-build/config/boards
History
Igor Pečovnik 1a12994e79
Moving sunxi-next to 4.17.y (#1049) 
* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)

Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok,  http://ix.io/1fZT

* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:

1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks

Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
2018-07-17 15:53:30 +02:00
..
aw-som-a20.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
bananapi.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
bananapim1plus.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
bananapim2.eos Moving Banana M2 to EOS, adding desktop NEXT target to M2+ 2018-01-25 10:28:45 +01:00
bananapim2plus.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
bananapim2ultra.csc Merge safe changes from development to master, part 1 2018-04-29 15:47:40 +03:00
bananapim2zero.csc Add CSC target for Bananapi M2 zero 2018-02-15 10:31:01 +01:00
bananapim3.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
bananapim64.csc Expose different nightly images 2018-02-13 21:30:41 +01:00
bananapipro.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
beelinkx2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
clearfogbase.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
clearfogpro.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
cubieboard2.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
cubieboard4.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
cubieboard.eos Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
cubietruck.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
cubietruckplus.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
cubox-i.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
espressobin.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
helios4.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
hummingbird.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
lamobo-r1.eos Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
lepotato.conf Major Amlogic RFC and cleanup 2018-06-28 08:27:08 +00:00
lime2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
lime-a10.eos Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
lime-a33.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
lime-a64.wip Merge sunxi family into stable 2018-05-24 13:32:29 +02:00
lime.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
melea1000.csc Moving and renaming Nanopi K2 to CSC and adding Mele1000 as CSC target 2018-02-06 19:31:15 +01:00
micro.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
miqi.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
mk808c.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
nanopct3plus.wip Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
nanopiair.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopiduo.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopifire3.wip Improve support for the NanoPi Fire 3 (add SPU1705, DVFS, thermal tables, etc.) 2018-07-15 12:14:42 +02:00
nanopik1plus.conf Enable ramlog only if it was enabled before. This fixes possible troubles on OMV installs. Adjusted Odroid NEXT kernel configuration, fixes eMMC/SD card u-boot updating if not on the first place /dev/mmcblk0 ... checks also 1 and 2, move nanopik1plus to supported list 2018-06-23 13:28:27 +00:00
nanopik2-s905.conf Major Amlogic RFC and cleanup 2018-06-28 08:27:08 +00:00
nanopim1.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopim1plus2.eos Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopim1plus.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopim3.wip Enable serial gadget console on Nanopi M3/T3/Fire3 2018-07-06 08:31:32 +00:00
nanopineo2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopineo.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
nanopineoplus2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
odroidc1.conf Odroid C1 DEV kernel patches adjustement. No HDMI, eMMC and broken network. http://ix.io/1fKw 2018-07-02 15:43:26 +00:00
odroidc2.conf Adjust kernel config for C2 default and enabled bionic beta DEV CLI image 2018-06-28 10:22:54 +00:00
odroidn1.wip Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
odroidxu4.conf Odroid XU4 kernel 4.14.y kernel config and patches adjustement (DEV branch) 2018-07-01 18:58:45 +00:00
olimex-som204-a20.csc Update olinuxino BSP packages 2018-05-03 09:00:16 +03:00
olimex-som-a20.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
olinux-som-a13.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
olinuxino-a13.csc Fix typo 2017-12-05 11:37:09 +02:00
orangepi2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepi-r1.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepi.eos Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
orangepilite2.wip Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepilite.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepimini.eos Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
orangepione.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepioneplus.wip Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepipc2.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepipc.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepipcplus.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepiplus2e.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepiplus.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepiprime.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepiwin.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepizero.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepizeroplus2-h3.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepizeroplus2-h5.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
orangepizeroplus.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
pcduino2.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pcduino3.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pcduino3nano.eos Closing active support for few more older boards. Little to no samples so its hard to provide proper support even not much can go wrong ... 2018-01-25 19:55:52 +01:00
pine64.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
pine64so.conf Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
pinebook-a64.conf Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC 2018-06-19 19:37:42 +00:00
pineh64.wip Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
renegade.wip Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
rock64.conf Rock64 DEV sources and kernel config adjustement. Switching DEV u-boot branch to stock, since mainline is failing to build. http://ix.io/1fTi 2018-07-03 17:13:51 +00:00
sunvell-r69.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00
teres-a64.wip Add Olimex Teres and Pinebook DEV targets and few minor typos. Pinebook boots, Teres almost ... TBC 2018-06-19 19:37:42 +00:00
tinkerboard.conf change nightly target 2018-06-10 14:53:34 +02:00
topwise-a721.csc Introduce BOARDFAMILY and base LINUXFAMILY on this 2017-11-26 23:05:18 +01:00
tritium-h3.csc Define recommended image 2018-01-26 12:18:14 +01:00
tritium-h5.csc desktop beta target tritium H5 2018-06-23 20:35:32 -04:00
udoo-neo.eos Changing U-boot to mainline, adding patches for dev (4.14.y). It boots but virtually nothing works except network ... moving Udoo Neo under deprecated. Only one sample exists and little to no users around. 2018-01-19 20:04:17 +01:00
udoo.conf Cleanup board configuration files. Remove deprecated sections - they are defined directly in web page now - and adding CLI dev nightly images at several Allwinner boards 2018-06-05 12:34:09 +02:00
z28pro.csc Moving sunxi-next to 4.17.y (#1049) 2018-07-17 15:53:30 +02:00