armbian-build/config/sources/odroidxu4.conf
Tim Clephas c7c66a51de Keep next option for odroidxu4 (#1535)
Just use the same parameters as default
2019-08-27 10:48:55 +02:00

132 lines
3.7 KiB
Plaintext

BOOTSOURCE='https://github.com/hardkernel/u-boot.git'
BOOTSCRIPT='boot-odroid-xu4-default.ini:boot.ini'
BOOTDIR='u-boot-odroidxu'
BOOTENV_FILE='odroidxu4-default.txt'
BOOTBRANCH='branch:odroidxu4-v2017.05'
BOOTPATCHDIR='u-boot-odroidxu4-next'
UBOOT_TARGET_MAP=';;sd_fuse/bl1.bin.hardkernel sd_fuse/bl2.bin.hardkernel.720k_uboot u-boot-dtb.bin sd_fuse/tzsw.bin.hardkernel'
UBOOT_USE_GCC='> 6.3'
KERNEL_USE_GCC='> 7.0'
KERNELDIR='linux-odroidxu4'
case $BRANCH in
default | next)
KERNELSOURCE='https://github.com/hardkernel/linux'
KERNELBRANCH='branch:odroidxu4-4.14.y'
;;
# next)
#
# KERNELSOURCE='https://github.com/hardkernel/linux'
# KERNELBRANCH='branch:odroidxu4-4.14.y'
# LINUXCONFIG='linux-odroidxu4-default'
#
# ;;
dev)
KERNELSOURCE=$MAINLINE_KERNEL_SOURCE
KERNELBRANCH='branch:master'
KERNELDIR=$MAINLINE_KERNEL_DIR
;;
esac
CPUMIN=600000
CPUMAX=2000000
GOVERNOR=ondemand
SERIALCON=ttySAC2
setup_write_uboot_platform()
{
# this will update u-boot on the device rootfs is located on
# in case it's a mmc device, otherwise DEVICE will not be changed
# and will default to /dev/mmcblk0
local tmp=$(cat /proc/cmdline)
tmp="${tmp##*root=}"
tmp="${tmp%% *}"
[[ -n $tmp ]] && local part=$(findfs $tmp 2>/dev/null)
[[ -n $part ]] && local dev=$(lsblk -n -o PKNAME $part 2>/dev/null)
[[ -n $dev && $dev == mmcblk* ]] && DEVICE="/dev/${dev}"
}
write_uboot_platform()
{
# handle writing to eMMC on package upgrades
# assuming $2 points to a correct device
if [[ $2 == /dev/mmcblk* && -b ${2}boot0 ]]; then
local device=${2}boot0
echo 0 > /sys/block/$(basename $device)/force_ro
local is_emmc=1
signed_bl1_position=0
bl2_position=30
uboot_position=62
else
local device=${2}
signed_bl1_position=1
bl2_position=31
uboot_position=63
fi
if [[ -f $1/u-boot.bin ]]; then
# default branch
if [[ $is_emmc == 1 ]]; then
tzsw_position=718
env_position=1230
else
tzsw_position=719
env_position=1231
fi
dd if=$1/bl1.bin.hardkernel of=$device seek=$signed_bl1_position conv=fsync > /dev/null 2>&1
dd if=$1/bl2.bin.hardkernel of=$device seek=$bl2_position conv=fsync > /dev/null 2>&1
dd if=$1/u-boot.bin of=$device bs=512 seek=$uboot_position conv=fsync > /dev/null 2>&1
dd if=$1/tzsw.bin.hardkernel of=$device seek=$tzsw_position conv=fsync > /dev/null 2>&1
dd if=/dev/zero of=$device seek=$env_position count=32 bs=512 conv=fsync > /dev/null 2>&1
else
# next branch
if [[ $is_emmc == 1 ]]; then
tzsw_position=1502
else
tzsw_position=1503
fi
env_position=2015
dd if=$1/bl1.bin.hardkernel of=$device seek=$signed_bl1_position conv=fsync > /dev/null 2>&1
dd if=$1/bl2.bin.hardkernel.720k_uboot of=$device seek=$bl2_position conv=fsync > /dev/null 2>&1
dd if=$1/u-boot-dtb.bin of=$device bs=512 seek=$uboot_position conv=fsync > /dev/null 2>&1
dd if=$1/tzsw.bin.hardkernel of=$device seek=$tzsw_position conv=fsync > /dev/null 2>&1
dd if=/dev/zero of=$device seek=$env_position bs=512 count=32 conv=fsync > /dev/null 2>&1
fi
}
family_tweaks()
{
echo "blacklist ina231_sensor" > $SDCARD/etc/modprobe.d/blacklist-odroid.conf
echo "#Serial console allow root" >> $SDCARD/etc/securetty
echo "ttySAC2" >> $SDCARD/etc/securetty
}
family_tweaks_bsp()
{
mkdir -p $destination/etc/udev/rules.d
cp $SRC/packages/bsp/odroid/90-builtin-net-rps.rules $destination/etc/udev/rules.d
if [[ $BRANCH != default ]]; then
mkdir -p $destination/usr/local/bin
cp $SRC/packages/bsp/rockchip/hdmi.rules $destination/etc/udev/rules.d
install -m 755 $SRC/packages/bsp/rockchip/hdmi-hotplug $destination/usr/local/bin
fi
# park HDD heads on shutdown
mkdir -p $destination/lib/systemd/system-shutdown
install -o root -g root -m 0755 $SRC/packages/bsp/odroid/odroid.shutdown $destination/lib/systemd/system-shutdown/odroid.shutdown
}