1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
15 lines
440 B
Diff
15 lines
440 B
Diff
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
|
|
index 1ca4dcd..3288146 100644
|
|
--- a/scripts/Makefile.lib
|
|
+++ b/scripts/Makefile.lib
|
|
@@ -278,7 +278,8 @@ DTC_FLAGS += -Wnode_name_chars_strict \
|
|
-Wproperty_name_chars_strict
|
|
endif
|
|
|
|
-DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
|
|
+DTC_FLAGS += $(DTC_FLAGS_$(basetarget)) \
|
|
+ -@
|
|
|
|
# Generate an assembly file to wrap the output of the device tree compiler
|
|
quiet_cmd_dt_S_dtb= DTB $@
|