armbian-build/patch/kernel/sunxi-next/general-add-h3-mixer1.patch
Igor Pečovnik 1a12994e79
Moving sunxi-next to 4.17.y (#1049)
* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)

Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok,  http://ix.io/1fZT

* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:

1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks

Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
2018-07-17 15:53:30 +02:00

31 lines
859 B
Diff

diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 126899d..7fa7494 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -500,6 +500,14 @@ static const struct sun8i_mixer_cfg sun8i_h3_mixer0_cfg = {
.vi_num = 1,
};
+static const struct sun8i_mixer_cfg sun8i_h3_mixer1_cfg = {
+ .ccsc = 1,
+ .mod_rate = 432000000,
+ .scaler_mask = 0xf,
+ .ui_num = 3,
+ .vi_num = 1,
+};
+
static const struct sun8i_mixer_cfg sun8i_v3s_mixer_cfg = {
.vi_num = 2,
.ui_num = 1,
@@ -522,6 +530,10 @@ static const struct of_device_id sun8i_mixer_of_table[] = {
.data = &sun8i_h3_mixer0_cfg,
},
{
+ .compatible = "allwinner,sun8i-h3-de2-mixer-1",
+ .data = &sun8i_h3_mixer1_cfg,
+ },
+ {
.compatible = "allwinner,sun8i-v3s-de2-mixer",
.data = &sun8i_v3s_mixer_cfg,
},