- The edge branch will soon move to 6.16, so adding the current branch
now.
- The kernel config is just a copy of edge config since both kernels are
the same right now.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
KASLR, or Kernel Address Space Layout Randomization, is a
security mechanism used in operating system kernels to randomize
the memory locations of kernel code and data. This makes it
significantly harder for attackers to exploit memory corruption
vulnerabilities by preventing them from knowing the exact
addresses of kernel components.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- Enable USB serial by default.
- Allows serial access without needing extra UART cable.
- Also USB serial is much faster than using the UART debug port.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
The old method carried along with board-pbp-add-dp-alt-mode.patch only
makes typec work in one(normal) orientation. This patch introduces a
proper extcon driver and makes the workaround cleaner, so orientation
switch is working.
Improvements:
- type-c DP on rk3399 works with both orientations
- type-c USB 3.0 on rk3399 works with both orientations, with minor
issues, see below
Caveats:
- Powered USB-C hubs may be not recognized, and can be worked around by
loading a gadget driver, or manually toggling the mode once for each
connection.
- Some dual-role devices(phone, tablet) may be not recognized.
Affected boards:
- TinkerBoard 2/2S
- Pinebook Pro
- NanoPC T4
- Orange Pi 4
- Orange Pi 4 LTS
Tested on tinkerboard 2s. This patch contains other minor fixes for
tinker2's device tree, including adding a missing fan node, adding color
labels to leds.
The 2 patches adding dp support for nanopc t4 and pinebook pro are also
updated accordingly.
The device trees of Orange Pi 4 / 4 LTS are also updated to match the
new implementation.
Change U-Boot repository link from git.ti.com to Github. In the past,
there have been CI issues caused due to git.ti.com failing.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
Texas Instruments maintains a custom apt repository [0] that contains:
* tools like k3conf, which run on K3 devices
* TI's versions of upstream packages (such as mesa)
* out-of-tree drivers and firmware for graphics, wifi etc
Therefore, add TI's custom repository as the highest priority repository
in the filesystem. Doing this ensures that if apt finds a version of a
package that exists in both upstream Debian and the TI repository, it
picks the latter.
Additionally, introduce K3_PACKAGES variable to store a list of packages
that should be installed by-default in a K3 image. Initialize it to hold
TI's CC33xx packages.
Also set EXTRAWIFI to "no" in `current` image.
[0] https://github.com/TexasInstruments/ti-debpkgs
Co-authored-by: Suhaas Joshi <s-joshi@ti.com>
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
TI SDK supports images with real-time kernel. Add support for building
such images for the `current` release by adding a config file for it.
The RT image is built with the `current-rt` branch.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
- BeagleBoard.org boards normally ship with USB cdc enabled to allow
network sharing and ssh support over usb.
- This is specially important for boards like pocketbeagle2 since it
does not have built-in wifi.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Enables kernel options that are important for making armbian viable for use on PocketBeagle 2.
Can now run all examples present in the beagle examples repo: https://github.com/beagleboard/vsx-examples
Signed-off-by: Ayush Singh <ayush@beagleboard.org> Andrei Aldea <andrei@beagleboard.org>
- fixes: unrecognized option '-Wl,--no-warn-rwx-segment'
- add a patch to atf that removes the unrecognized linker options
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Follow conventional `if-then-else-fi` constructions by not having `else` followed by semicolon. Hush is accepting, but other commonly used shells do not accept this.
- UUID boot does not seem to work on PocketBeagle 2.
- So specify the block device path instead.
- Also without rootwait, the boot will fail.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
