Ricardo Pardini
d3683b7230
radxa-e24c: u-boot: edge: disable gmac1 as the dsa switch won't work anyway
...
- the gmac works, but is connected to switch chip that is not supported by u-boot
- here I disable gmac1 for the u-boot DT
- that allows for easier booting from USB ethernet adapters
2025-12-19 16:16:17 +01:00
Ricardo Pardini
b2086d997f
radxa-e24c: u-boot: edge: add USB NET drivers to defconfig
...
- so we can boot from USB network in u-boot
2025-12-19 16:16:17 +01:00
Ricardo Pardini
ea57d65665
radxa-e24c: u-boot: edge: mainline u-boot, picked from Kwiboo's WIP branch
...
- I couldn't wait
- Using a few commits _after_ v2026.01-rc4
2025-12-19 16:16:17 +01:00
Werner
86f473d7ab
nanopi-r76s: move patch to board specific folder ( #9062 )
...
avoid cross-contamination from other boards/families that will use this uboot version in future
2025-12-13 18:32:45 +01:00
Igor Velkov
94533e961d
ODroid-N2: switch uBoot v2022.10 to v2026.01
...
reapply patches
2025-12-01 05:50:26 +08:00
SuperKali
18795c437a
rk3576: nanopi-r76s: add mainline u-boot and fix USB3.0 host ( #8997 )
...
- Add mainline U-Boot support for edge branch (v2026.01-rc2)
- Add U-Boot defconfig patch for nanopi-r76s
- Fix USB3.0 Type-A host port configuration in DTS
- Enable USB OTG0 controller in host mode with power GPIO control
- Set KERNEL_TEST_TARGET to edge
2025-11-25 17:20:13 +01:00
Ricardo Pardini
7f15455702
u-boot: prepare v2026.01 patch directory
...
- fileenv patch, generic for all
- 0000.patching_config.yaml for null-patch-free future
2025-11-17 20:23:44 +01:00
Ricardo Pardini
98cb83e5e3
odroidhc4: u-boot: bump to v2026.01-rc2
2025-11-17 20:22:01 +01:00
Ricardo Pardini
d9a0bb9e69
khadas-vim3l: u-boot: bump to v2026.01-rc2, enable BTRFS and more
...
- boot order: SD -> NVMe -> USB -> eMMC -> PXE
- NVMe must come before USB, as initting USB kills NVMe
2025-11-17 20:21:39 +01:00
