- notes in the board file about the RAM issues (tested, confirmed working blob change of #4383 by @pinhaozhang working with u-boot 21.07; `blobless` also works with ATF v2.7 on my known-good-RAM boards)
- tinkerboard-2: add full firmware, for the rtl8822ce PCIe Wifi default card in the tb2 as shipped by ASUS
- tinkerboard-2: uboot: rename `TARGET_TINKER-2_RK3399` to `TARGET_TINKER2_RK3399` to avoid warnings all over
- tinkerboard-2: slower but working Tinkerboard 2S eMMC (HS400+ES to HS200)
- both for u-boot and kernel.
- should not affect 2, only 2S
* `meson64`: `6.0`: g12a and g12b pinmux patches from Radxa
* u-boot: `radxa-zero2`: Radxa's patches for the Zero2 on `v2022.10`
* u-boot: `radxa-zero2`: use `v2022.10` plus Radxa's patches
* `meson64` u-boot v2022.10: change `BOOT_TARGET_DEVICES` to try to boot USB, NVME and SCSI before SD, MMC, PXE, DHCP
* `radxa-zero`: include v2022.10 standard patches (eg: boot from USB first)
* AR-1301: Move Rock PI 4 C Plus to stable targets
* Add also minimal targets
AFAIK this will be the primary model
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
* `radxa-zero` & `radxa-zero2`: set `BOOT_FDT_FILE` explicitly; no real changes
* `radxa-zero2`: `6.0`/`edge`: update Radxa Zero 2 DTS patch with Radxa's latest
* `radxa-zero`: `6.0`/`edge`: update USB-C patch with "fix interrupt storm from fusb302"
* `radxa-zero`: use pure mainline v2022.10 u-boot with no patches
* Proposal to create a Community Supported config for Amlogic based
TV Boxes to pickup the work that was done previously by balbes150
but is no longer supported by him.
This also provides a place where development can occure within the
Armbian framework since others on the internet are producing builds
called Armbian that are not done from within the Armbian community.
Changes to be committed:
new file: config/boards/aml-s9xx-box.tvb
modified: config/sources/families/include/meson64_common.inc
modified: config/sources/families/meson-gxl.conf
new file: packages/bsp/aml-s9xx-box/boot/aml_autoscript
new file: packages/bsp/aml-s9xx-box/boot/emmc_autoscript
new file: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf
new file: packages/bsp/aml-s9xx-box/boot/s905_autoscript
new file: packages/bsp/aml-s9xx-box/boot/u-boot-readme.txt
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x-s912
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x2-s922
new file: packages/bsp/aml-s9xx-box/root/fstab.template
new file: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
new file: packages/bsp/aml-s9xx-box/root/install-aml.sh
* Merge sources
Co-authored-by: Igor <igor@armbian.com>
* Add initial RISCV support
* Add UEFI edge and current kernel configs
* Cleanup and adjust packages
* Those files were in wrong path
* Fix locations
* Ubuntu images built
* Remove Debian support as its too fragile
* Remove Pinta as it doesn't work under riscv
* Limitation is only for building images
* Remove obsolete switch
* Cleanup major arch config files
* Support for Docker building
* Move all legacy u-boot patches under one general legacy folder
* Move 32b Rockchip under 2022.04 and legacy for Miqi
Tested
* Move Rock 3A patch dir under legacy
* Move / merge meson64 patch folder into v2022.07
Merge 2022.04 (mainly Rockchip 32) into 2022.07, tested
* Remove not needed patch
* Add last kernel version to config
* Repair damage to Le Potato by untested u-boot bump
Since 15cab819fe decided to move everything to 22.07 without tests, revert back as this causes the ""Synchronous Abort" handler, esr 0x96000004" error.
* Fix damage caused by untested U-boot bump
Revert result of 15cab819fe and restore booting to Odroid C2
* Create asound.state.lepotato
alsa config for le potato
* Update lepotato.conf
use board specific asound.state
* Add Rockpi 4C+
* add newer patches:
- apply patches from RadxaNaoki <noaki@radxa.com>
- ref 5652d6f9c2a4e2c50ac1040c0388859381b0616f: arm64: dts: rockchip: add gmac for ROCK 4C+ (#17)
- apply latest patches from Marcone <marco.nelissen@gmail.com>
- ref e39da181b099a86f5440ed1c08fc699d4a65aed7: arm64: dts: rockchip: Make Rock Pi 4C+ ethernet actually work
- ref 8c519612eeb852268371b3c596eec4622460e5bf: arm64: dts: rockchip: add Rock Pi 4C+ LEDs
- ref 726441afe687ea6059bac37f145ff204b75430f7: arm64: dts: rockchip: enable Rock Pi 4C+ wifi
- ref caad7bef3b5558e2598480c0a0089e2ac3cedcdd: arm64: dts: rockchip: enable Rock Pi 4C+ nvme
- ref 6cdc3215d1691bcd2a407a30e88efa0cec179eb2: arm64: dts: rockchip: enable Rock Pi 4C+ OTG
* default top USB3 port to host mode
* get 2nd HDMI port to work at least. :)
* revert OTG USB3.1 port back to otg mode
* [rockpi4c+] update board def. add usb host overlay.
* remove redundant HDMI clocks and voltages
* enable test builds for Rock PI 4 C+
* [rockpi4c+] add USB host overlay
Co-authored-by: Joe Khoobyar <fourheads@gmail.com>
* Repair damage to Le Potato by untested u-boot bump
Since 15cab819fe decided to move everything to 22.07 without tests, revert back as this causes the ""Synchronous Abort" handler, esr 0x96000004" error.
* Fix damage caused by untested U-boot bump
Revert result of 15cab819fe and restore booting to Odroid C2
* `odroidm1`.wip: hk's `legacy`= 4.19 and `edge`= mainline+tobetter's 5.19 rebased; *requires* `skip_spiboot=true`
- @TODO: family/etc naming is terrible with vendor kernels. Sorry. Fight over it and let me know?
- @TODO: config is very probably incomplete.
- new `boot-rockchip64-vendor.cmd`:
- does not use fixed load_addr, instead use ramdisk_addr_r for everything
- load kernel and initrd as late as possible
- look for overlays twice:
- once: with prefix and folder
- twice: without prefix, nor folder; helps with vendor provided overlays like hk's and tobetter's
- wip: edge: tobetter's patchset rebased against 5.19.3
- wip: edge: bump to tobetter's 5.19
- legacy: .config `CONFIG_ARM64_VA_BITS_48=y`
- wip m1: update legacy config from odroid
- odroidm1: container/bpf stuff in legacy config
* Update configs and enable beta build target
* Adjust current kernel
* Update targets
* Remove everything but EDGE kernel
* Cleanup
* Fix
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* Go back to latest stable u-boot with VIM3L
https://github.com/armbian/build/pull/4251
* Revert "Go back to latest stable u-boot with VIM3L"
This reverts commit 0b240563ef.
* meson64: allow board-specific `BOOTBRANCH`; `khadas-vim3l`: `BOOTBRANCH_BOARD=tag:v2022.04`
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
