ThomasKaiser
0a54d03ed8
Consolidate timer frequency settings accross all kernels
...
...skipping default 3.x kernels
2018-07-16 16:41:45 +02:00
Igor Pečovnik
cf40fda60a
Add OMV 4 module dependencies and a workaround for ram2log that OMV can make use ZRAM powered ramlog. It is also helpful in case of sudden crash. Nginx can't start without log places into its subdir. We create them on start.
2018-07-04 14:19:50 +00:00
Igor Pečovnik
76e9ce0d16
Switch Sunxi-DEV U-boot to 2018.05, adjust patches, add support for A83T http://ix.io/1fUK
2018-07-03 21:10:18 +00:00
Martin Ayotte
f9060b8fdf
re-enable CONFIGFS in Dev
2018-06-27 11:32:20 -04:00
Igor Pečovnik
a1bd2f83b9
Adjust CMA
2018-06-24 19:07:21 +02:00
Igor Pečovnik
10e2065190
SUNXI/64 Add CSI driver, kernel configuration update, meging patches for NeoAir and enable camera driver, enable teres bootlogo, AW SOC ID
2018-06-21 11:31:26 +00:00
Karabek
033c18581c
Thermals: activate GP-ADC temp sensor
...
Activates General Purpose Analog/Digital Converter to read SoC temp via IIO (in Line 5954)
CONFIG_SUN4I_GPADC=y
2018-06-02 12:46:14 +02:00
Karabek
ee4a2772bb
Allwinner: Enable HDMI for H2/H3 boards
...
In BRANCH=dev "linux-sunxi-dev.config" currently does not set "CONFIG_SUN8I_DE2_CCU=y" (previous versions had this, Sunxi-Next still has it).
DE2-CCU clock seems to be required for HDMI output (see drivers/clk/sunxi-ng/Kconfig).
If this is NOT configured we get:
[ 7.221461] sun8i-mixer 1100000.mixer: Couldn't get our reset line
[ 7.221562] sun4i-drm display-engine: failed to bind 1100000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer]): -517
[ 7.221570] sun4i-drm display-engine: Couldn't bind all pipelines components
[ 7.221693] sun4i-drm display-engine: master bind failed: -517
Tested with Orange Pi One and Sunvell R69
2018-05-31 16:17:36 +02:00
Igor Pecovnik
2c08ec8f5a
Merge sunxi family into stable
2018-05-24 13:32:29 +02:00
Stefan Mavrodiev
24b49c9248
Enable EDID firmware override
2018-01-31 12:49:03 +02:00
Stefan Mavrodiev
3f45e489b5
Enaeble ATMEL_ECC module
2018-01-31 08:21:23 +02:00
Stefan Mavrodiev
6c059834fb
Update bluetooth target
2018-01-29 16:40:07 +02:00
Stefan Mavrodiev
ab3b992dd2
Update sunxi-dev defconfig
2018-01-29 15:14:26 +02:00
ThomasKaiser
841a6411b7
Kernel support for zram
2017-11-03 10:58:22 -07:00
ThomasKaiser
2815b25bc9
Switch to ondemand cpufreq governor on modern kernels
...
Otherwise ondemand tweaks in /etc/init.d/armhwinfo are likely to break
2017-10-17 19:46:05 +02:00
Igor Pecovnik
c4079d274c
Enable CONFIG_ATA_OVER_ETH
...
https://github.com/armbian/build/issues/788
2017-09-30 23:01:57 +02:00
Igor Pecovnik
5ee9114ec1
Adjusting sunxi-DEV config and disabling broken NAND patches.
2017-05-18 06:12:40 +02:00
Thomas Kaiser
ca3637c57f
Make kernels OMV friendly -- see #36
2017-04-02 16:06:55 +02:00
Igor Pecovnik
94b255c947
Sunxi NEXT and DEV kernel config update
2017-03-26 20:30:44 +02:00
zador-blood-stained
ce187b0027
Update sunxi-dev kernel config
2017-01-08 16:08:30 +03:00
Martin Ayotte
e68c2cb265
add AT24 modules for I2C EEPROMs
2017-01-01 14:05:06 -05:00
zador-blood-stained
cdc02f6786
Switch several kernels to Thumb2 mode
2016-11-20 21:22:45 +03:00
Martin Ayotte
e38711da78
add KEYBOARD_GPIO and KEYBOARD_MATRIX
2016-11-04 17:28:07 -04:00
Martin Ayotte
3cc3707a78
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
config/kernel/linux-sunxi-dev.config
2016-11-04 14:31:20 -04:00
zador-blood-stained
264cffe466
Experimental NAND support for A20 micro and CT
2016-11-01 13:14:38 +03:00
Martin Ayotte
3d10e9c298
add MTD/NAND support for Olimex-A20-MICRO
2016-10-30 13:25:05 -04:00
zador-blood-stained
736be5f9e1
Update sunxi-dev config
2016-08-16 12:02:44 +03:00
Martin Ayotte
f083178eb7
add modified ConfigFS patches for kernel 4.8.x in sunxi-dev
2016-08-12 15:14:33 -04:00
Igor Pecovnik
4c52d1d5a8
Moving configurations to subfolders, renaming version to 5.10
2016-04-25 19:00:37 +02:00
