* dts: amlogic: meson-g12b-bananapi-cm4: switch to enable-gpios
The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios. This is also required by bindings:
meson-g12b-bananapi-cm4-cm4io.dtb: regulator-vddio-c: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* board-bananapi-cm4-switch-to-enable-gpios: `text formatting correction`
Apparently the builder did care for the original.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Backport DTS/DTSI changes from linux-6.4.y to 6.1.y
Add meson64-reboot driver to all boards
Add board: ODROID N2L
Add uart_A uart_AO_B uart_B uart_C where appropriate
U-Boot v2023.07.02: ODROID N2/N2L/N2Plus/C4
Meson64-reboot driver: (source: tobetter)
While the current meson64-reboot driver is cleaner and doesn't
depend on modding other kernel sources, its functionality leaves
much to be desired. One example can be found in the ODROID C4.
Using the current driver, the board will not properly power off,
leaving the POWER LED still on. The new driver powers off the unit
completely.
Fan control: (ODROID N2L/N2PLus)
Added service and script for controlling the trip point.
fanctrl: arguments: 65 55 45 35 25 menu run
┌──┤ Fan Control ├──┐
│ │
│ 6) 65°C │
│ 5) 55°C │
│ 4) 45°C │
│ 3) 35°C │
│ 2) 25°C │
│ E) Exit .. │
│ │
│ │
│ <Ok> │
│ │
└───────────────────┘
NOTES: (N2L/HC4): I do not own the units so I can't run tests.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Linux 6.1 (current) / 6.4 (edge)
Add "current" to: config/boards/bananapim2pro.csc
Add uart_AO_B and uart_B to: meson-sm1-bananapi.dtsi
Add related pins to: meson-g12-common.dtsi
add wif/bt support to: meson-sm1-bananapi-m5.dts (BT = uart_A)
Add the ability to enable via overlays
NOTE: The overlay to enable the wifi on the BPI-M5 will be added
at a later date.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:
meson-a1-ad401.dtb: l2-cache0: 'cache-unified' is a required property
https://lore.kernel.org/lkml/20230421223211.115612-1-krzysztof.kozlowski@linaro.org/T/
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Removed WIP status
Added CONFIG_R8169=m to defconfig(s) (eth support)
Modified and added additional patches (linux 6.1 / 6.4)
U-Boot v2023.07.2 (dropped v2022.10)
Upstream BT FW (rtl8822cs) is now shared between CM4IO and M2s
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
- convert `add-board-t95z.patch` to `board-t95z-add-rc-remote-keymap.patch` since that's all that's left
- `-spinor` DTS really should be overlays, but keep them as alternate .dtbs for now
