Update Das U-Boot to v2023.07.02
Patch: HACK: mmc: meson-gx: limit to 24MHz
db6738fed9
In my testing the patch is required for stable boot on REV 1.51.
It is not required on REV 1.4, but has no ill effects on boot.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
HACK: BOOT ORDER: NVMe SDCARD eMMC.
NOTES:
In my testing there has been no false starts or hangs up. Meaning
the boot process has been stable.
The downside to this in my opinion is that if there is an OS on
the NVMe it will always take boot priority. The drive would need
to be pulled or DD'd in order for SD eMMC boot to kick in.
Tested-on: Waveshare CM4-IO-BASE-B
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Legacy kernel is not supported no more for these rockchip boards and
thus, they can be removed from their associated board configuration files.
Signed-off-by: Emmanuil Chatzipetru <echatzip.manu@gmail.com>
- This requires https://github.com/armbian/firmware/pull/65
- thinkpad-x13s: workaround ubuntu's pd-mapper only starting on "-laptop" kernels
- thinkpad-x13s: add fprintd and pam
- thinkpad-x13s: throws warnings about missing userspace if not trixie/sid/mantic
- thinkpad-x13s: split hooks into functions
- thinkpad-x13s: enable touchscreen hack via udev
- thinkpad-x13s: use override, not separate service, for systemd settage of BT public-addr
- thinkpad-x13s: "handle" alsa-ucm-conf by simply overwriting with fixed version
- thinkpad-x13s: update .config
- according to 0dbdb29bc4
- thinkpad-x13s: bump to 6.6-rc4; add more cmdline params
- add a bunch of tricks I learned from jhovold's talk
- update .config, no changes
- thinkpad-x13s: bump to steev's lenovo-x13s-v6.6.0-rc5 - update .config, no changes
- thinkpad-x13s: bump to steev's lenovo-x13s-v6.6.0-rc5
- thinkpad-x13s: trixie is missing fprintd/libpam-fprintd, skip for now if trixie
- thinkpad-x13s: set `UEFI_MOUNT_POINT_SKIP_FSTAB=yes` (otherwise hangs waiting for it, dunno why)
The service is only enabled by default on Vim4 as that board heats
a lot and a fan is absolutely necessary. Service will be available
on vim1s as well and if someone has purchased the fan for it, they
would be able to enable it themselves.
The service is only added for legacy kernel right now as I am not
sure if the upcoming 5.15 kernel will have same sysfs interface for
fan.
> Based on AmazingFate's kernel DT and Kwiboo's `rk3568-2023.10`
Tested with a OrangePi 3B 4GB v1.1:
- SD-card boot
- eMMC boot
- SPI Flash boot
- chip is XMC `XM25QU128CWIQ`, not `W25Q256JWEIQ` listed in schematics
- PCIe/NVMe
- Ethernet has stable MAC
- can boot both edge (mainline) and legacy (vendor rk 5.10) kernels
- USB in uboot is untested
- UMS untested (I lost my A-to-A otg cable)
