* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
This fix impacts all boards that use extlinux.conf
I have tested the aml-s9xx-box build to ensure that this works as expected.
I think the only other boards that use extlinux.conf are those under
the media kernel
In testing I realized that I needed to add SRC_CMDLINE to the aml-s9xx-box
config file to get the correct append line added to the extlinux.conf file
Changes to be committed:
modified: config/boards/aml-s9xx-box.tvb
modified: config/sources/common.conf
There is no way to support this on s905 TV Boxes while reusing the
android u-boot as the android uboot on s905 conflicts with the partition
table location of standard mainline linux.
Changes to be committed:
modified: config/sources/families/meson-gxl.conf
deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
* `meson64-6.1` - rebased patches; 3 were mainlined
- JetHub device was mainlined
- ODROID's hack for pwm1_enable was re-done diffrently in mainline
* `meson64`: switch `current` to `6.0`, `edge` to `6.1-rc8`
- sunxi64_common.inc, sunxi_common.inc:
- change current setting of UBOOT_TARGET_MAP
to allow a probable overriding definition
in a board config file
fixes#4478
* Proposal to create a Community Supported config for Amlogic based
TV Boxes to pickup the work that was done previously by balbes150
but is no longer supported by him.
This also provides a place where development can occure within the
Armbian framework since others on the internet are producing builds
called Armbian that are not done from within the Armbian community.
Changes to be committed:
new file: config/boards/aml-s9xx-box.tvb
modified: config/sources/families/include/meson64_common.inc
modified: config/sources/families/meson-gxl.conf
new file: packages/bsp/aml-s9xx-box/boot/aml_autoscript
new file: packages/bsp/aml-s9xx-box/boot/emmc_autoscript
new file: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf
new file: packages/bsp/aml-s9xx-box/boot/s905_autoscript
new file: packages/bsp/aml-s9xx-box/boot/u-boot-readme.txt
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x-s912
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x2-s922
new file: packages/bsp/aml-s9xx-box/root/fstab.template
new file: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
new file: packages/bsp/aml-s9xx-box/root/install-aml.sh
* Merge sources
Co-authored-by: Igor <igor@armbian.com>
* Add initial RISCV support
* Add UEFI edge and current kernel configs
* Cleanup and adjust packages
* Those files were in wrong path
* Fix locations
* Ubuntu images built
* Remove Debian support as its too fragile
* Remove Pinta as it doesn't work under riscv
* Limitation is only for building images
* Remove obsolete switch
* Cleanup major arch config files
* Support for Docker building
* Move all legacy u-boot patches under one general legacy folder
* Move 32b Rockchip under 2022.04 and legacy for Miqi
Tested
* Move Rock 3A patch dir under legacy
* Move / merge meson64 patch folder into v2022.07
Merge 2022.04 (mainly Rockchip 32) into 2022.07, tested
* Remove not needed patch
* Add last kernel version to config
* `odroidm1`.wip: hk's `legacy`= 4.19 and `edge`= mainline+tobetter's 5.19 rebased; *requires* `skip_spiboot=true`
- @TODO: family/etc naming is terrible with vendor kernels. Sorry. Fight over it and let me know?
- @TODO: config is very probably incomplete.
- new `boot-rockchip64-vendor.cmd`:
- does not use fixed load_addr, instead use ramdisk_addr_r for everything
- load kernel and initrd as late as possible
- look for overlays twice:
- once: with prefix and folder
- twice: without prefix, nor folder; helps with vendor provided overlays like hk's and tobetter's
- wip: edge: tobetter's patchset rebased against 5.19.3
- wip: edge: bump to tobetter's 5.19
- legacy: .config `CONFIG_ARM64_VA_BITS_48=y`
- wip m1: update legacy config from odroid
- odroidm1: container/bpf stuff in legacy config
* Update configs and enable beta build target
* Adjust current kernel
* Update targets
* Remove everything but EDGE kernel
* Cleanup
* Fix
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* Go back to latest stable u-boot with VIM3L
https://github.com/armbian/build/pull/4251
* Revert "Go back to latest stable u-boot with VIM3L"
This reverts commit 0b240563ef.
* meson64: allow board-specific `BOOTBRANCH`; `khadas-vim3l`: `BOOTBRANCH_BOARD=tag:v2022.04`
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
