The-going
cc228ad303
sunxi-6.12: Switch to v6.12.12
2025-02-26 20:14:19 +01:00
amazingfate
db3615f7b0
mainline-kernel.conf.sh: bump 6.14 to rc4
2025-02-26 21:40:01 +08:00
amazingfate
328cd82221
rockchip64-edge: bump to 6.14
2025-02-26 21:40:01 +08:00
amazingfate
1dac001d36
mainline-kernel.conf.sh: bump 6.14 to rc2
2025-02-26 21:40:01 +08:00
igorpecovnik
70c10c4df0
Automatic board configs status synchronise
2025-02-24 10:29:05 +01:00
Blieque Mariguan
8e75c8ebd1
feat: Use deb822 APT sources
...
- Replace `armbian.list` with `armbian.sources`. This holds the same
information in a newer format, deb822.
- Replace HTTP with HTTPS for Armbian repositories.
2025-02-24 09:23:11 +01:00
Igor Pecovnik
f6d832ef98
Remove hard dependency for network manager
2025-02-24 09:22:59 +01:00
Igor Pecovnik
e541581263
Status changes: csc to conf and vice versa
...
- set build priorities
2025-02-24 09:22:59 +01:00
Thomas McKahan
1b5f1d365f
move Meson GX to LibreElec FIP
2025-02-24 09:21:13 +01:00
Mecid Urganci
eeb5e8eacf
rockchip64: RK3588 update DDR & BL31 blobs
2025-02-24 07:16:37 +01:00
Tony
ffe959bb18
small cleanup Meson64 ( #7868 )
2025-02-23 21:54:39 -05:00
TheSnowfield
745955110b
rockchip64:loaderimage: fix rk3308 uboot loader offset
2025-02-23 19:24:40 +01:00
Patrick Yavitz
9102accba7
BananaPi BPI-F3: BOARD_MAINTAINER="pyavitz"
...
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-23 19:22:53 +01:00
The-going
16d34e346b
sunxi-6.6: Switch to v6.6.75
2025-02-23 09:56:20 +01:00
The-going
a544dbd8b5
config: Add BananaPi M4 Berry board as WIP
2025-02-23 09:56:20 +01:00
TheSnowfield
23ced3ea81
sakurapi-rk3308b: enable rockchip drm driver
2025-02-23 09:55:48 +01:00
TheSnowfield
3bca18ea7f
sakurapi-rk3308b: use full rk blobs instead
2025-02-23 09:55:48 +01:00
青菜萝 卜冬瓜
b86cf1adbb
sun55iw3-syterkit: update kernel config ( #7855 )
2025-02-23 15:55:42 +08:00
Thorsten Maerz
4bddce99ef
MKS-Klipad50: Switch to standard support
2025-02-21 19:12:23 +01:00
chainsx
872a554c69
station-m2: use mainline devicetree name
2025-02-21 19:11:17 +01:00
Igor Pecovnik
533fc7dca5
Plucky: drop non existing packages
2025-02-20 09:25:32 +01:00
Igor Pecovnik
6adfd3a5e1
Raspberry PI: move EDGE kernel from 6.14 to 6.13 as it doesn't build
2025-02-20 08:30:03 +01:00
Ricardo Pardini
89a16b82f5
odroidm1: u-boot: enable setexpr; patch 2025.01 for fileenv; enable squashfs support
...
- as Armbian u-boot is possibly deployed to SPI (replacing Petitboot),
try to make as compatible as possible; eg enable squashfs support
- in this case, `setexpr` and `fileenv` are used by HAOS
- found `fileenv` here 049e1a1949
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
2025-02-20 07:00:43 +01:00
Chen Jiali
135bbc423b
radxa-aic8800: use systemd.link instead of udev rule
...
And move naming_wireless_interface to radxa-aic8800.sh
To avoid unexpected errors caused by ID_NET_SLOT being empty when using lower version udev
2025-02-20 06:59:58 +01:00
Chen Jiali
26a517757f
Add support for Rock 2A and 2F
2025-02-20 06:59:58 +01:00
青菜萝 卜冬瓜
b44df3093d
station-m2: delete the redundant function.
2025-02-20 06:59:08 +01:00
青菜萝 卜冬瓜
26830cb918
station-p2: delete the redundant function.
2025-02-20 06:58:49 +01:00
Igor Pecovnik
26a4a5d37d
Bump CURRENT to 6.12, move previous to 6.6, bump EDGE to 6.14
...
Tested on RPI5 and Zero 2w
2025-02-20 06:58:38 +01:00
Igor Pecovnik
3981d58bba
Raspberry Pi family: read motd board name from /proc/cpuinfo
...
- also adjust hostname if they are Armbian defaults
- drop rpi5b build config as they all run with one image
2025-02-20 06:58:38 +01:00
jomadeto
1888a12ac7
Magicsee C400-Plus: Switch to standard support
...
Also remove SimpleDRM from blacklist, not needed
2025-02-20 06:57:39 +01:00
Igor Pecovnik
44906b19ce
Ubuntu Plucky: add architecture dependent packages
2025-02-20 06:57:22 +01:00
Werner
475e28056b
Orangepi 5 MAX - add support for current ( #7842 )
...
* add `current` target
* Add Orangepi 5 max device tree to `current` dt
2025-02-19 13:04:17 +01:00
Mecid Urganci
eed26e656e
Add Support for Rock 5T
2025-02-17 14:24:28 +01:00
amazingfate
264bcc42d1
remove software-properties-common/gtk for trixie and sid
2025-02-16 23:04:14 +01:00
Milivoje Legenovic
a5448efa71
Odroid M2: initial support
2025-02-16 23:04:01 +01:00
nyanmisaka
b8423db17a
Bump two leftover radxa rk35xx uboot to next-dev-v2024.10
...
just remove these leftover overrides.
Signed-off-by: nyanmisaka <nst799610810@gmail.com>
Co-authored-by: amazingfate <liujianfeng1994@gmail.com>
2025-02-16 23:03:46 +01:00
Patrick Yavitz
67969c4efa
BananaPi BPI-F3: Update spacemit defconfig
...
Misc. Additions
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-02-16 13:04:47 -05:00
Sergey Ko
62f72f4566
Radxa Zero, fix for overlay prefix name ( #7826 )
2025-02-16 11:38:47 -06:00
Igor Pecovnik
3637f07183
Revert "imx6: move current to 6.12.y"
...
This reverts commit a3dac432fc .
USB patch for 6.12.y needs rework - its a bit more work as code has been moved around kernel tree. TBD after 25.2 release.
2025-02-12 11:50:10 +01:00
Igor Pecovnik
5115cdf47a
Odroid XU4: disable BTF as it crashes kernel load
...
https://docs.kernel.org/bpf/btf.html
2025-02-12 10:08:31 +01:00
Igor Pecovnik
3851e940bf
Cosmetical: switch edge and current kernel order, so that current shows as primary
...
When using TUI, this is important.
2025-02-11 13:46:04 +01:00
amazingfate
83e5675fb4
rk3576: remove unnecessary BL32 from uboot
2025-02-10 20:18:21 +01:00
amazingfate
5402492796
merge u-boot-armsom-rk3576 to u-boot-radxa-rk35xx
2025-02-10 20:18:21 +01:00
amazingfate
d048673c00
u-boot-radxa-rk35xx: bump to next-dev-v2024.10
2025-02-10 20:18:21 +01:00
Martin Schmiedel
04873d47de
MBa8MPxL-RAS314: fix firmware file in root folder
...
- wget and cp lead to remaining file in root
- use mv instead
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
2025-02-10 20:16:48 +01:00
Martin Schmiedel
9f8f9f51ba
IMX8: update patches to fix upstream changes
...
- while at it rewrite-uboot-patches
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
2025-02-10 20:16:48 +01:00
Igor Pecovnik
af131c02cd
Meson: drop (long) broken legacy code which is also breaking CI
2025-02-10 08:10:04 +01:00
Thorsten Maerz
1716d6c1b6
build only CLI images
2025-02-10 08:09:40 +01:00
Maxim Medvedev
fe50e4a283
mkspi: do not build desktop images
...
There is not practival sense in Gnome for this kind of boards. Usually we use KlipperScreen or/and WEB UI.
2025-02-10 08:04:44 +01:00
Werner
fc20fb8639
nanopi-r3s: set HAS_VIDEO_OUTPUT ( #7810 )
2025-02-10 05:47:20 +01:00