* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)
Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT
* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:
1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks
Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
* implemented improved support for the FriendlyArm NanoPi Fire3
* introduced new WIP board configuration "nanopifire3"
* added and enabled the FA SPU1705 regulator
* enabled CPU-based thermal support
* implemented DT-based DVFS table (400MHz-1.4GHz)
* fixed and updated the thermal table and cooling maps
* added support for the onboard LED
* minor patch cleanup
* Initial commit, cleanup of Rockchip default
* clean up patches:
- 100_DTS_Tinker_opp_LED was splitted into 3 patches
- 100_DTS_opp for opp (adjusted to RKs 3 point description of opp Voltage)
- 110_DTS_8723bs for the wifi driver
-rename of 270-dts-tinker-bluetooth.patch -> 111_DTS_disable_AP6212_bluetooth.patch to keep wifi-chip stuff together
- 120_DTS_led1_heartbeat
- 190_dts_tinker_s_emmc was reworked and splitted
- gpiomem node was removed and has its own patch (260_DTS_gpiomem_node)
- i2c1 node was removed and has its own patch 270_DTS_activate_i2c1
- spi2 part was removed (defined in rk3288.dtsi), default CS will now be CS0 not 1 (no reason to change this)
- vdd_log regulator is removed (the counterpart is missing anyway, and actually disabled in ASUS and Rockchips branch) --> own patch in case it gets activated
- 120_workaround_tinker_board_reboot -> 130_workaround_tinker_board_reboot to get some free numbers... ;)
* Renamed 190_DTS_tinker_s_emmc and splitted into DTS-Part and driver part (191_driver_mmc_adjustment)
* Boots, Still no hdmi console
* Rockchip Kernel config updates
Thanks to @Ntemis for the config options, they fixed the framebuffer
Still have runtime GPU errors related to power model
- merging C2 and Meson family on the source level, C2 is still making own kernels, but sources, patches and configs are the same
- merged boot scripts for meson family. support for non existing legacy kernel was dropped from boot scripts, added UUID support, armbianEnv.txt
- Meson default remain on 4.14.y, NEXT moved to 4.17.y and DEV remains on master
- remove deprecated patches, remove wrong permissions in patches
- tested on C2, K2 and Le Potate. USB troubles are still present and common, while K2 and Lepotato might have boot/reboot troubles on 4.16+
- boards configuration cleanup
- moving K2 to the supported list. It's the same level of support as Le Potato
