* Re-enable network checksum TX offload on rockchip64 family
* Adjust gmac PBL setting for rk3399 legacy to fix network issues with MTU 1500
* Adjust gmac PBL setting for rk3328 in rockchip64-legacy to fix network issues with MTU 1500
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* add Jetson Nano
* Update jetson-nano.conf
* Update targets.conf
* Add better description
* Adjust config - try to enable ZRAM
* Packaging patch not needed
* Extlinux was solved in other commit
* Move board to CSC for now
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add support for configuring CPU temperature offset
Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures.
For more details, see https://forum.armbian.com/topic/11534-orange-pi-zero-lts-incorrect-temps-reported/
* Update armbian-motd.dpkg-dist
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Added 2 configuration parameters to armbian-zram-config.
First paramter (SWAP=) can explicitely disable zram swap (while leaving log and tmp untouched).
Second parameter (TMP_SIZE) can be used to explicitely set tmp ramdisk size.
The behaviour of existing configurations is not changed.
New function activate_zram() to initialize zram devices and parameters.
Changed script to use zramctl to more flexibly establish zram devices to use for log and tmp.
This also fixes issues which result from both armbian-zram-config and armbian-ramlog being hardcoded to use zram0
* Add support for ZSH / TMUX / oh-my-zsh
* Selecting default shell at 1st run
* Install ZSH by default except on minimal image
* Lets rather create armbian-zsh package
* - fix remaining ZSH problems
- add systemd timer to remove default desktop autologin feature
- change DESKTOP_AUTOLOGIN to disabled by default
* Few small improvements
* Oneliner for revering all users back to BASH if package is uninstalled
* Properly escape variables
* Fixing chmod
* More cryptic awk magic to fix permissions for all normal users that are getting zsh magic
* Move default values where they should be and fix for updates not showing up
* Add support for vnstat and ZFS
* Cosmetical
* Put defaults back
* Update data displaying
* Add support for displaying "reboot required" when regular packages like e.g. dbus requires a reboot
* Add dependency problem check
* Also add storage to user defaults
* Improve HTOP with scripted updating based on network up/down
Also enable / disable GPU temperature - where available.
* Update Htop default configuration
Tested once again on N2/N2+
Note: disabled mesond_vdec module in kernel config since it crashes complete video system when loaded. Need to be added back once stable - or perhaps we need to adjust some parameters?
- remove Debian stretch from image creations.
- if LOCAL_MIRROR is defined use just that, not armbian upstream packages
- move aptly web server from 8080 to 80
- adjust welcome motd
- remove Ubuntu Eoan from distribution selection menu
Fixed a bug in armbian-check-first-login-reboot.sh which caused a
newline character to be prepended to the shell prompt even when a reboot
required warning was not shown to the user.
* Add initial support for Odroid N2+
* Update C4 config and test booting
* Updates to C4, N2, N2+
- merge C4 and N2 legacy under meson64, same u-boot
- upgrade legacy kernel to meed DTB from mainline
- merge N2 and N2+, add a hack to display + in motd when N2+ is detected
- shortly spin N2 fan at startup
- merged N2 mainline and legacy boot script
- add upstream patches
* One of the regulators were breaking booting of Odroid N2
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
* enable root auto login on first boot, automatically determine timezone from geolocation
* Improve tzdata and locales detection
* Add timeouts for Curl and support for selecting more locales per location.
* Disable NetworkManager-wait-online.service
https://askubuntu.com/questions/1018576/what-does-networkmanager-wait-online-service-do
* Improve overall UX when creating new username and changing root password
- check password quality and reject if not good enough. Not very heavy.
- shorter way of adding new username
* Resolve killing inactive consoles, remove FAQ silently since we open more consoles
Fix for locales where the decimal separator is a 'comma'. For these systems `uptime` would output `load average: 0,06, 0,08, 0,07`. And then it would be possible for `006` to be above `critical_load`. Forcing the dot separator with `LC_ALL=C uptime` fixes this issue.
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
* Add initial support for FriendlyARM Nanopi R2s
One net port not working yet.
* Enable 2nd network, rename it to lan0, adjust motd to see lan*
* Added rk3328 dmc devfreq driver
* Fixed SD card issues for NanoPi R2s
* Added usb serial gadget console for NanoPi R2s
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
This file is inconsistent with the rest of the files in this set. The description in the file /etc/defaults/armbian-motd says that you can block sections of the generate motd thus:
# add space-separated list of MOTD script names (without number) to exclude them from MOTD
# Example:
# MOTD_DISABLE="header tips updates"
#
This presently fails for this file, you need to add "armbian-config" to the MOTD_DISABLE list to block it.
Matching the style of the THIS_SCRIPT name in this file, to the other files in the set, removes this inconsistency. I've found no unexpected behavior after making the change.
