* Re-enable network checksum TX offload on rockchip64 family
* Adjust gmac PBL setting for rk3399 legacy to fix network issues with MTU 1500
* Adjust gmac PBL setting for rk3328 in rockchip64-legacy to fix network issues with MTU 1500
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
* add Jetson Nano
* Update jetson-nano.conf
* Update targets.conf
* Add better description
* Adjust config - try to enable ZRAM
* Packaging patch not needed
* Extlinux was solved in other commit
* Move board to CSC for now
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Currently armbianmonitor -n does not detect vlan interfaces correctly.
This is because of an incorrect egrep -o which filters out the parent interface name:
network interface: 100
instead of
network interface: eth0.100
Cascading into:
armbianmonitor: line 1095: eth0. - 0 : syntax error: invalid arithmetic operator (error token is ". - 0 ")
Fixed by changing the egrep logic to filter out the last field of route -n output.
Also fixes a timer issue by moving the timer start to after the interface selection.
time controller adjustment: -2.43
/usr/bin/armbianmonitor: line 1128: read: -2.43: invalid timeout specification
* At first login we set users locales based on his location which seems to be to agressive
Add a question before setting it should suffice. Closing https://github.com/armbian/build/issues/2398
* Read it silently
* Detect locales selection only if we choose to add normal user
* Asking for shell right after seting root password
* Move selections inside traps
* Remove duplicated call
* Add support for configuring CPU temperature offset
Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures.
For more details, see https://forum.armbian.com/topic/11534-orange-pi-zero-lts-incorrect-temps-reported/
* Update armbian-motd.dpkg-dist
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Added 2 configuration parameters to armbian-zram-config.
First paramter (SWAP=) can explicitely disable zram swap (while leaving log and tmp untouched).
Second parameter (TMP_SIZE) can be used to explicitely set tmp ramdisk size.
The behaviour of existing configurations is not changed.
New function activate_zram() to initialize zram devices and parameters.
Changed script to use zramctl to more flexibly establish zram devices to use for log and tmp.
This also fixes issues which result from both armbian-zram-config and armbian-ramlog being hardcoded to use zram0
* Add support for ZSH / TMUX / oh-my-zsh
* Selecting default shell at 1st run
* Install ZSH by default except on minimal image
* Lets rather create armbian-zsh package
* - fix remaining ZSH problems
- add systemd timer to remove default desktop autologin feature
- change DESKTOP_AUTOLOGIN to disabled by default
* Few small improvements
* Oneliner for revering all users back to BASH if package is uninstalled
* Properly escape variables
* Fixing chmod
* More cryptic awk magic to fix permissions for all normal users that are getting zsh magic
* Move default values where they should be and fix for updates not showing up
* Add support for vnstat and ZFS
* Cosmetical
* Put defaults back
* Update data displaying
* Add support for displaying "reboot required" when regular packages like e.g. dbus requires a reboot
* Add dependency problem check
* Also add storage to user defaults
* armbian-hardware-optimization: delay applying eth0 tweak on rk3399
* armbian-hardware-optimization: delay applying eth0 tweak on rockchip64
* armbian-hardware-optimization: fixed irq smp affinity for usb
on rockchip64.
Similar like the one applied to rk3399 on commit [eaf6853]
Pinebook-Pro Support:
suspend to idle via key and lid close
brightness keys
volume control keys
wifi, bluetooth frimware
touchpad tweaks
keyboard config
armbian-hardware-optimization
bootsplash
Co-authored-by: Britt Dodd <britt@reactornet.net>
* Improve HTOP with scripted updating based on network up/down
Also enable / disable GPU temperature - where available.
* Update Htop default configuration
