* [ rockchip64] second round config migration
Recommend all @armbian/boards-rockchip maintainers double check the resulting configurations, as stated in the PR the level of confusion in the family config logic likely means some boards have unnecessary extra stuff.
config file from from the family config file
Changes to be committed:
modified: config/boards/aml-s9xx-box.tvb
modified: config/sources/families/meson-gxl.conf
* sunxi-6.1: rebase to v6.1.14, reexport patches megous
* sunxi-6.1: rename fixes patches
* sunxi-6.1: reexport armbian patches
* sunxi-6.1: fix the series.conf file to the current state
* sunxi-6.1: switch edge to v6.1.14
* Adjust sunxi to 5.15 / 6.1 / 6.2
- change configs
- adjust broken patches
- disable patch that only changes /readme.md and it has issues
---------
Co-authored-by: Igor Pečovnik <igor@armbian.com>
* OLIMEX Teres-A64: Official Support
This commit provides an official armbian support for the system
Signed-off-by: Jacob Hrbek <kreyren@rixotstudio.cz>
* Remove additional lines
* CODEOWNERS: Removed myself from board config
* targets: undid changes
Addressed in https://github.com/armbian/os/pull/8
* olimex-teres-a64: align with #4877
---------
Signed-off-by: Jacob Hrbek <kreyren@rixotstudio.cz>
- `risc-v`: rework RichNeese's boards, reduce families, move tweaks to boards
- `risc-v`/`starfive`: `CONFIG_MOTORCOMM_PHY=m` for the onboard Ethernet
- `risc-v`/`starfive`: use mainline kernel 6.1.y, with StarFive's rebased patches against `v6.1.5`
- from https://github.com/starfive-tech/linux/commits/visionfive
- contention point: `1022-soc-sifive-ccache-Add-StarFive-JH71x0-support.patch` which I merged half-assed, need review/fixes?
- `risc-v`/`starfive`: update kernel config, sans changes
- `risc-v`/`starfive`: switch from `grub` to `extlinux`
- `risc-v`/`starfive`: new `starfive` family with their (vendor) kernel
Co-authored-by: Richard Neese <r.neese@gmail.com>
- symptoms:
- no video display in u-boot
- can't boot from SD (but does from eMMC)
- this has proven to solve nothing, but is still neat
- real problem is probably the FIP?
- sharing most UEFI code, will replace the `virtual` one soon
- x86: patch uboot defconfig to use the `q35` machine type, not `i440fx`
- separate x86 bootscript, due to non-uInitrd-ness of it
- hack ramdisk load address both in u-boot source and bootscript
- use 32-bit u-boot, not 64-bit
- grub: introduce `UEFI_GRUB=skip`, does not deploy GRUB (but does the kernel packages, etc)
- auto-enable qcow2 output for these
- works with both distro's and Armbian's kernels
As extlinux is not matured within the armbian tools (armbian-config in particular), revert change until such a time as the proponents of extlinux mature the Armbian utilities.
-Fixes use of overlays
* `orangepi5.wip`: initial OrangePi5 support
- OPi5's Xunlong vendor u-boot; override family in board hook
- using original config from vendor, needs `BOOT_SOC`
- OPi5's kernel patches, all extracted from Xunlong's tree
- Only enable the DT patch and the Motorcomm PHY patch
- Other stuff that looks might be useful is grouped in a few other disabled patches
- Most panel/overlays/etc from Xunlong tree not included
- everything is on top of existing `rockchip-rk3588` family,
- thus the same crazy half-android rk kernel tree and ancient rk u-boot
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
* `linux-rockchip-rk3588-legacy`: `.config` updated to 5.10.110; no actual changes
- prepare for merging Xunlong config
* `linux-rockchip-rk3588-legacy`: `.config` Xunlong config, manually merged; preserved previous PR's
- preserved previous PR's changes:
- 1fdbab346a
- bf3b8a8fb7
- 7a3ad3afb2
- f1952f97f4
- ab70cb247f
- 62adba7825
- ba10622c32
- cd4da2a77b
- 7b3325c95e
- b4945d973c
- a8473e8143
* `linux-rockchip-rk3588-legacy`: `.config` re-updated to 5.10.110 after Xunlong changes
* OPi5: `rockchip-rk3588-legacy`: add patch to remove chosen > bootargs from `rk3588-linux.dtsi`
* Opi5: add build targets (by Igor)
Co-authored-by: Ricardo Pardini <ricardo@pardini.net>
Co-authored-by: Muhammed Efe Çetin <efectn@protonmail.com>
Co-authored-by: Igor <igor@armbian.com>
This fix impacts all boards that use extlinux.conf
I have tested the aml-s9xx-box build to ensure that this works as expected.
I think the only other boards that use extlinux.conf are those under
the media kernel
In testing I realized that I needed to add SRC_CMDLINE to the aml-s9xx-box
config file to get the correct append line added to the extlinux.conf file
Changes to be committed:
modified: config/boards/aml-s9xx-box.tvb
modified: config/sources/common.conf
* Enable CONFIG_BPF_SYSCALL which might improve Docker support
* Adjust board names
* Move neo3 to previous bootloader too
* Disable 3d support on rock64
* Fixed u-boot v2022.07 compilation for Helios64
* Move Helios64 back from EOS to community supported as images can be assembled
Co-authored-by: Igor <igor@armbian.com>
