* Don't display RX today: Error: No interface matching when wrong NIC is detected
* Improve checking
* Address shellcheck problem
* Switch conditions order
* Fix variable $root_partition_device to be a device path
- variable $root_partition_device is intended to be a
device path as /dev/$root_partition_device_name
* Fix determination and usage of variable $sduuid
- a) lookup mmc devices excluding the mmc device probably providing
the current root partition
- b) if there is no sduuid determined by this lookup,
then lookup any mmc partition matching /dev/mmcblk*p1
- c) move the sduuid calculation to the script header
to enable usage for scenario selection filtering
- d) hide installation scenario #1 selection,
if $sduuid is empty, since $sduuid is essential for that scenario
* Hide current root partition device from destination selection
- add new variable $root_partition_name
- use this variable to filter current root partition
from destination selection in check_partitions()
* Fix behavior in case of no available partition
- The logic in check_partitions() in case of no available
partition is improved not to fail for a hidden reason
and UX for fresh disk devices is improved
- Fix the calculation of $FREE_SPACE for devices without or
with an empty partition table
- Ask the user to proceed AFTER the minimum free capacity
required is verified
- Improve the logic for auto-creating initial partitions
as follows:
1. Check for a minimum free space of 4GB for a partition
2. Ask user to proceed with auto-created partition(s) or not
3. Distinguish between UEFI and non UEFI device
4. Create a partition of full free size for non UEFI devices also
* Add support for MTD char driven flash
- replace $spicheck by $mtdcheck
- add probable MTD char device partitions to $mtdcheck
- update comments and dialog content:
- replace "SPI Flash" by "MTD Flash"
- replace call of "create_armbian 'spi' ..." by "create_armbian 'mtd' ..."
- update description for /dev/nand1 /dev/nand2 as "legacy SUNXI NAND"
- additional parameters passed to import function "write_uboot_platform_mtd":
$3 - Log file name
$4 - SPACE separated list of all MTD device partition(s)
- function check_partitions():
- remove file system filter on lsblk commands
for listing probable target partitions
- fix typo "Destnation" -> "Destination"
- fix indentation on if scopes
fixes#4576
There is no way to support this on s905 TV Boxes while reusing the
android u-boot as the android uboot on s905 conflicts with the partition
table location of standard mainline linux.
Changes to be committed:
modified: config/sources/families/meson-gxl.conf
deleted: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
* armbian-audio-config: Massively speed up script
This script calls amixer to set various mixer volumes, by simply trying
a bunch of mixer names for each sound card in the system. In practice,
this meant the amixer command was called 158 times for each sound card.
The overhead of all these forks and probably also amixer startup added
together to produce a noticable slowdown in startup.
For example on an Orange Pi PC, the script took about 6 seconds per
soundcard. This was on a system with a few extra USB soundcards (6 alsa
cards in total):
$ time bash ./armbian-audio-config.original
real 0m35.662s
user 0m20.145s
sys 0m15.145s
This commit modifies the script to spawn amixer only once per alsa card,
passing all the mixer set commands through stdin. This pretty much
completely kills the slowdown. On the same 6-card system:
$ time bash ./armbian-audio-config
real 0m0.406s
user 0m0.345s
sys 0m0.229s
* armbian-audio-config: Add quotes to fix lint errors
image file instead of Image as some of the included uboot files do not support the Image format and require the uImage.
Changes to be committed:
modified: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf
Commit c909864922 removed a prompt
asking the user if they want to change display settings, but didn't
remove the checks that later used the answer. Since it's been like
this for 2 years now apparently without issue, remove the checks and
the shellcheck workaround.
Make the two Y/n questions that firstlogin asks behave consistently
with each other, and more in line with user expectation:
- Reject anything that is not Y, y, N, n or <enter>. Previously the
"Connect via wireless? [Y/n]" question would interpret Y, y and
<enter> as "yes", and everything else as "no", whereas the
"Set user language based on your location? [Y/n]" question would
loop until the user selected Y, y, N or n.
- Make pressing enter equivalent to the default "Y", since that
is the capitalized option.
- Echo back what the user typed.
* Enable additional motd tips showing some internal ads
33% probability of showing, just like for the armbian-config
* Update quotes and add expiration date support
* Change variable names
* Add support to download quotes from our server
* Fix curl parameters
* Keep only weekly update
* `armbian-audio-config`: do nothing if aplay/amixer/alsactl missing; shfmt
* `armbian-hardware-optimization`: fix for `case` without `esac` introduced in #4417; `shfmt`
Without this, when mkimage fails (for example because the boot partition
is too small), install.log shows an error like:
mkimage: Write only 16310208/17794920 bytes, probably no space left on the device
But this does not terminate the build, so the compile script shows no
error and an image is generated, but it is unbootable.
This runs the script with -e, so when mkimage fails, the script fails,
which makes update-initramfs fail, which makes the build fail.
* Proposal to create a Community Supported config for Amlogic based
TV Boxes to pickup the work that was done previously by balbes150
but is no longer supported by him.
This also provides a place where development can occure within the
Armbian framework since others on the internet are producing builds
called Armbian that are not done from within the Armbian community.
Changes to be committed:
new file: config/boards/aml-s9xx-box.tvb
modified: config/sources/families/include/meson64_common.inc
modified: config/sources/families/meson-gxl.conf
new file: packages/bsp/aml-s9xx-box/boot/aml_autoscript
new file: packages/bsp/aml-s9xx-box/boot/emmc_autoscript
new file: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf
new file: packages/bsp/aml-s9xx-box/boot/s905_autoscript
new file: packages/bsp/aml-s9xx-box/boot/u-boot-readme.txt
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x-s912
new file: packages/bsp/aml-s9xx-box/boot/u-boot-s905x2-s922
new file: packages/bsp/aml-s9xx-box/root/fstab.template
new file: packages/bsp/aml-s9xx-box/root/install-aml-s905-emmc.sh
new file: packages/bsp/aml-s9xx-box/root/install-aml.sh
* Merge sources
Co-authored-by: Igor <igor@armbian.com>
* Fix to flush volatile journald to prevent full /var/log at startup
* re-introduce directory / in non-rsync copy, and exclude journal* in this copy
Note: this may need some testing if someone doesn't use rsync
* Fix for non-rsync copy to Disk, since journal cannot be copied onto itself
* Backed up journal files are removed with vacuum, so no need to delete them separately
* Make room at boot by removing old logs, in addition to the removal later
every 15 minutes
* remove old archived journal files modified more than 1 day ago
* make sure volatile logging is used, since journald sometimes turns persistent at boot
remove unused commented lines in ramlog
* Fix check for configured journald volatile logging
* revert #3799, the rsync --delete
* Exclude /var/log/journal from install, and create empty /var/log/journal directory when it exists during install
Co-authored-by: dennis laptop <dennis@smartstatetechnolgy.nl>
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Dennis <bijwaard@gmail.com>
Co-authored-by: dennis laptop <dennis@smartstatetechnolgy.nl>
* Repair damage to Le Potato by untested u-boot bump
Since 15cab819fe decided to move everything to 22.07 without tests, revert back as this causes the ""Synchronous Abort" handler, esr 0x96000004" error.
* Fix damage caused by untested U-boot bump
Revert result of 15cab819fe and restore booting to Odroid C2
* Create asound.state.lepotato
alsa config for le potato
* Update lepotato.conf
use board specific asound.state
* [rockchip64-dev]Fix OrangePi4 Bluetooth and Mic
* [rockchip64-dev]enable CONFIG_SERIAL_DEV_CTRL_TTYPORT for bluetooth
* Update patch/kernel/rockchip64-dev/add-board-orangepi-4.patch
Co-Authored-By: Piotr Szczepanik <piter75@gmail.com>
* Update patch/kernel/rockchip64-dev/add-board-orangepi-4.patch
Co-Authored-By: Piotr Szczepanik <piter75@gmail.com>
* Update patch/kernel/rockchip64-dev/add-board-orangepi-4.patch
Co-Authored-By: Piotr Szczepanik <piter75@gmail.com>
* Update patch/kernel/rockchip64-dev/add-board-orangepi-4.patch
Co-Authored-By: Piotr Szczepanik <piter75@gmail.com>
* general add panel simple dsi
* Backporting patch to 5.10 kernel makes sense. Lets do it.
* Fixed rt5651 codec build module
* Fix mic for rt5651 state
Co-authored-by: iamdrq <iamdrq@qq.com>
Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Add support for apt-mark hold warning
- we need to know if kernel packages are on hold
- when upgrade is finished, fix numbers and update list
* Add postupdate hook
* Bugfix
* Bugfix
* Small refactoring
* Improve UX
* Improve detection and change wording
* RockPI-S board has no video I/O
* udev rule to fix MAC address of iface based on UUID
Deals with WiFi chip lacking any EEPROM to store its unique Ethernet MAC address
Generic mechanism -- could be utilized for other boards having similar issues
* Handy Device Tree overlays for the RockPI S
Use armbian-add-overlay to install these
Reduce CPU voltage for the RK3308 B-S
Option to overclock RK3308 B-S to 1.3Ghz
Increase SDIO clock rate from 1Mhz to 10Mhz
This increases WiFi throughput from 300K bytes/s to 2.4M bytes/s
* corrected comment
* No longer repeat standard opp's in this dts
Require that the standard bs dts already be installed
* User README for adding RockPI-S board variant specific dts overlays
* "enabled" --> "okay"
* added mention of sdnand.dts, fixed typo
* added p2p0 to interfaces whose MAC address should be "fixed"
* RK3308 CPU serial number in nvmem replaces UUID for derivation of fixed MAC addr
Restored use of install utility
* Use RK3308 specific CPU serial number
rather than rootfs UUID
* remove generic fixMACaddress
* Install fixMACaddr file-by-file via install utility
* Drive SDIO bus signals faster
setting RK3308_SOC_CON0_VCCIO3 reduces signal rise/fall times to WiFi SDIO chip
from 30ns to 5ns.
This odd fix forward ported from legacy kernel.
Allows Rock Pi-S WiFi to operate at full speed.
* Set RK3308 I/O voltage domains before SDIO initializes
This patch moves responibility form the io-domain to the pinctrl driver because
the io-domain driver is probed after the SDIO devices are discovered.
This was causing multiple SDIO I/O failures during boot.
A new pinctrl property is added:
io-1v8-domains
is a u32 interpreted as a bit mask where each set bit corresponds to
a 1.8V I/O domain (as opposed to the default of 3.3V for I/O)
The mask is writted to the RK3308_SOC_CON0 GRF register
(once) when the pinctrl driver starts
The default mask is 0x10 where only I/O domain 4 runs at 1.8V
This is necessary for the RockPI-S to run the SDIO clock at high (50Mhz) speed
* align whitespace
* factored rk3308bs overlays out up sdio speedup patch
* factored dts for RK3308 iodomains and pinctrl patches out of speedup patch
* remains of sdio speedup patch merely add iodomains support for rk3308
* factored rockpis dts modification out from rk3308 io voltage domains
replaced rk3308 support from iodomains with
new io-voltage-domains property added to pinctrl
io-voltage-domains specific to rk3308 for now, others SOCs may be added later.
* add sequence numbering to names of rk3308 patches
* corrected tab alignment
* Add fallback for debug upload
in case ix.io is unreachable
* Update packages/bsp/common/usr/bin/armbianmonitor
Co-authored-by: hzyitc <h1260071766@126.com>
* adjust url
* fix missing sentence
* Fix broken logic
* Set paste.armbian.com as default service
y
Co-authored-by: hzyitc <h1260071766@126.com>
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor <igor@armbian.com>
