- we had `_DEBUG=n` forced, which conflicted with `_EXPERT=y`;
- some important SBC features (like _GPIO_SYSFS) depend on _EXPERT=y
- we've plans to enable BTF/CO-RE kernels soon, so removing the non-debug enforcement makes some sense
- also, .config's will be free to determine debug config, nothing's changing in those here
- remove the `_EMBEDDED` special case handling, we can do that as well now
- add a separate hook to renable `CONFIG_GPIO_SYSFS=y`; it was a victim of `EXPERT=n` in some kernels
- this does not include rewrites of all the .configs -- those should be done in a separate batch -- either way effect is the same, hooks will always override .config's
- during rewrites, a large number of new options will show up, since `_EXPERT=y` is used as dependency for many of Kernel's experimental-ish features
- armhf was disabled for some releases and now we get spurious failures building certain artifacts (firmware)
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
Validates the dts/dtb file for the selected board and outputs the validation logs to the user.
This can be used when adding a new board, developing or improving a dts file. Should lead to higher quality device trees and patches overall, if used.
- useful for `collabora` and other experimental kernels, we don't want to have to add it to each individual board's KERNEL_TARGES one by one
- but we don't want to allow typos in BRANCH to emit very strange unrelated errors
* main-config: fix: avoid errors when BRANCH contains a dash; convert to underscore
* rockchip64_common: shellfmt, no changes
* rockchip64_common: move SERIALCON defaulting logic to a (verbose) hook for flexibility
* config: allow to build BRANCHes not listed in KERNEL_TARGET as long as the config is valid
- useful for `collabora` and other experimental kernels, we don't want to have to add it to each individual board's KERNEL_TARGES one by one
- but we don't want to allow typos in BRANCH to emit very strange unrelated errors
* extensions: mesa-oibaf extension by @monkaBlyat - mainline mesa PPA for Ubuntu
- does nothing on Debian
* extensions: (v3) amazingfated-rk35xx, now `rk-multimedia-amazingfate` - panfork-free
- simply skips if not on Jammy
- deploys Chromium + Widevine if desktop
* rockchip-rk3588: introduce `vendor-boogie-panthor` experimental BRANCH/kernel
- original: https://github.com/hbiyik/linux-rockchip.git (branch `rk-6.1-rkr1-panthor-v6`)
- I picked the commits on top of clean armbian/linux-rockchip `6.1-rkr1` as of 2024-04-01
- At https://github.com/rpardini/armbian-linux-rockchip-rk3588/tree/armbian-rk-6.1-rkr1-plus-boogie-panthor-v6
- Diff: https://github.com/armbian/linux-rockchip/compare/rk-6.1-rkr1...rpardini:armbian-linux-rockchip-rk3588:armbian-rk-6.1-rkr1-plus-boogie-panthor-v6
- rockchip-rk3588: introduce `boogie-bsp` BRANCH
- rockchip-rk3588: copy linux-rk35xx-vendor.config into linux-rk35xx-boogie-bsp.config
- rockchip-rk3588: update linux-rk35xx-boogie-bsp.config, no changes
- rockchip-rk3588: linux-rk35xx-boogie-bsp.config: `CONFIG_DRM_PANTHOR=m`
- rockchip-rk3588: linux-rk35xx-boogie-bsp.config: convert to defconfig
- rockchip-rk3588: rename to `BRANCH=vendor-boogie-panthor` for "clarity" (lol)
- rockchip-rk3588: vendor-boogie-panthor: force SERIALCON, full firmware (for blob needed for panthor) & mesa-oibaf extension
- rockchip-rk3588: vendor-boogie-panthor: enable amazingfated-rk35xx extension sans-panfork
Since `armbian_kernel_config` is "NOT for user consumption. Do NOT use this hook, this is internal to Armbian."
`custom_kernel_config` is able to overwrite previously set values.
Disable CONFIG_EXPERT as well since DEBUG_KERNEL=y is a dependency for EXPERT=y, meaning DEBUG_KERNEL would be re-enabled automatically if EXPERT is enabled
Manually forcing kernel options with 'call_extensions_kernel_config()' can introduce missing dependencies or misconfigurations. This commit introduces a function which checks the config, re-establishes its sanity if necessary and outputs any changes to the user.
This also makes `./compile.sh kernel-config` (exiting without changes) and `./compile.sh rewrite-kernel-config` ouput the same config file. Previously, this was not the case.
* Re-add functionality to create linux-libc-dev when building kernel packages.
* linux-libc-dev: append -${BRANCH}-${LINUXFAMILY} to package name and update control file
- This way we can safely include BOOT_SOC in /etc/armbian-release as done in the previous commit
- this will cause a rebuild of _all_ bsp-cli packages, even those for boards that don't define BOOT_SOC
- hopefully one day we will have BOOT_SOC ("What is the SoC?") defined for all boards
- for now, it will be empty for those that don't define it, which should be harmless
- RTW8723DS, RTW8723DU is unsupported/deprecated/obsolete by the author since kernel 6.7 in favor of RTW88, so deprecate it for kernel >=6.8
- RTL88x2cs specifically says in its repo: "USE RTW88 NOT THIS DRIVER", so deprecate in favor of RTW88, except for meson64 family
- move random RTL88x2cs hook specific for meson64 family in drivers_network.sh to their family config
Also add commit dates to make life prettier and easier
The following drivers have been updated with fixes for 6.8
- driver_rtl8811CU_rtl8821C
- driver_rtl88x2bu
- driver_rtl8811_rtl8812_rtl8814_rtl8821
The following drivers have been updated without specific 6.8 patches:
- driver_rtl8189ES (patches for 6.7, deleted two upstreamed patches)
- driver_rtl8189FS (patches for 6.7, deleted four upstreamed patches)
- it prepares git, applies patches to git, and re-writes them back from git
- same as kernel, it does git archeology for mbox-less patches, etc
- `uboot-patches-to-git` alias is also added, but my guess is rewrite is more useful
- refactor a common config function for both kernel and uboot
- example invocation: `./compile.sh BOARD=xxxx BRANCH=edge rewrite-uboot-patches`
- example: `./compile.sh BOARD=xxxxx BRANCH=edge kernel-dtb`
- outputs preprocessed DTS source for board in question to `output/`
- also outputs same preprocessed DTS source, ran through `dtc` with input and output DTS formats for "normalized" comparisions
- `inventory-boards-csv.py`: moar Python atrocities done to data; idea here is to output one line per board, with <<varies>> for fields that, well, vary (mainly across BRANCH'es)
- `inventory-boards` sets `TARGETS_FILE` to something that doesn't exist, so the `default-targets.yaml` is used (so same list for everyone, save for userpatched-boards)
- `DEBOOTSTRAP_DIR` must be set during the 1st stage, but NOT the second stage
- latest devel versions might be missing scripts for old releases; just symlink to the default one if so
- this hopefully should _end_ the debootstrap madness we've been handling, at least until we get around to mmdebstrap (Perl) one day
This fixes the readability of colorized output of compile.sh when
running on a terminal with a light background. It uses the COLORFGBG
environment variable similarly to how the ip(8) command does.
Signed-off-by: Darsey Litzenberger <dlitz@dlitz.net>
- without incremental: true:
- we replace the DT Makefile based on *.dts at the DT directory after all patching/copying is done
- overlay target is added if overlays present
- with incremental: true:
- we parse the Makefile, parse the DTs being built, and only add .dts's we have added from 'dt' directory
- overlays target are not added; we assume smth else already added them
The command added to check whether the directory is git or not was
having syntax error. Fixed the same. Also it seems adding safe-directory
with local doesn't really work which actually makes sense. hence
reverting to using global instead. Its still safer than before as
we are not adding * and are adding the actual path of the directory
* using the configured volume group name
* added LVM support
* ensuring /boot never on LVM volume, created hook to setup root device
* preparing root device via extension, not assuming any particular partition for root
* using tab spacing
* using global parameter to require a boot partition
* using boot require, moving cryptroot code to extension
* adds crypt image suffix
---------
Co-authored-by: rafael <rvalle@privaz.io>
* meson-s4t7: bump u-boot to khadas-vims-u-boot-2019.01-v1.6-release
* Use khadas default bootargs as much as possible
* Add new hook to allow copying code into kernel
* meson-s4t7: legacy: Switch to 5.15 kernel
* meson-s4t7: add kernel-config for 5.15 kernel
* device tree overlays for 5.15 kernel for vim1s and vim4
* restructure packaging of bsp files for vim1s/vim4
* silence vblank warning on boot
* Remove display workaround as it doesn't work with 5.15 kernel
* Remove 5.4 kernel patches
