- current (6.1) does not yet carry the DTB
- u-boot (up to at least 2023.10-rc2) does NOT have ADC detection for N2L, so force the DTB
- `meson-g12b.conf`: add a specific if for `odroidn2l` _before_ the `odroidn2*` for FIP blobs
Backport DTS/DTSI changes from linux-6.4.y to 6.1.y
Add meson64-reboot driver to all boards
Add board: ODROID N2L
Add uart_A uart_AO_B uart_B uart_C where appropriate
U-Boot v2023.07.02: ODROID N2/N2L/N2Plus/C4
Meson64-reboot driver: (source: tobetter)
While the current meson64-reboot driver is cleaner and doesn't
depend on modding other kernel sources, its functionality leaves
much to be desired. One example can be found in the ODROID C4.
Using the current driver, the board will not properly power off,
leaving the POWER LED still on. The new driver powers off the unit
completely.
Fan control: (ODROID N2L/N2PLus)
Added service and script for controlling the trip point.
fanctrl: arguments: 65 55 45 35 25 menu run
┌──┤ Fan Control ├──┐
│ │
│ 6) 65°C │
│ 5) 55°C │
│ 4) 45°C │
│ 3) 35°C │
│ 2) 25°C │
│ E) Exit .. │
│ │
│ │
│ <Ok> │
│ │
└───────────────────┘
NOTES: (N2L/HC4): I do not own the units so I can't run tests.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Some sd cards are unable to access in uboot when using miniloader
These cards are able to access when using spl instead
Spl is not related to DDR initialization so it is unlikely to introduce
DDR problems
- vim1s/vim4: remove uEnv.txt and default extlinux args, use simple arguments instead
- meson-s4t7.conf: hack: rereadpt (re-read partition table) in initrd local-top (for eMMC boot of oowow'ed image)
- meson-s4t7.conf: include both `u-boot.bin.sd.bin.signed` and `u-boot.bin.signed` in uboot package
- meson-s4t7: patch kernel for different dt "model" across VIM4 and "New VIM4"
- meson-s4t7.conf: set `EXTLINUX_SPECIFIC_FDT=no`, so u-boot auto-determines which DTB to use
- don't specify DTB; this way both the "original VIM4" and the "new VIM4" can boot with the same image
- only "boot from SD" supported right now
- building uboot with xPack riscv-none-embed-gcc **external** toolchain setup in hooks
- kvim4: very high kernel logging + systemd debug logging to console
- kvim4/kvim1s: add uEnv.txt and ROOT_FS_LABEL="ROOTFS" and Khadas-esque extlinux
- meson-s4t7: unify khadas-vim1s and khadas-vim4 u-boot building
- kernel .config:
- s4t7: original Khadas vendor config
- s4t7: CONFIG_BINFMT_MISC=y
- s4t7: make NFS/sunrpc stuff =y
- s4t7: enable USB wifi drivers from Armbian network_drivers
- firmware: at https://github.com/armbian/firmware/pull/56
- extlinux tricks require https://github.com/armbian/build/pull/5462
- status:
- kvim1s: boots from SD and works as server/CLI
- kvim4: kernel panic during systemd-udevd
Move the BPI-M2PRO off the BPI-M5 U-Boot.
The BananaPi M5 supports the RTL8822CS Mezzanine, so let us
provide the proper bluetooth firmware.
NOTE: Boot needs verifying.
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
- x13s: initialize bluetooth's public-addr, thus allowing BT to work
- linux-arm64-sc8280xp.config: enable per-core temperature sensors
- x13s: disable snapd.seeded service so boot won't hang if clock's < 2017
- x13s: back to steev's 6.3.y, since 6.4.y's audio drivers don't match alsa-ucm-conf
The default will align the data structures with the cluster size,
which causes the size to not be set to the full partition size. This
causes issues with some board ROMs. Use the -a flag to ignore the
alignment and fill the available space.
Co-authored-by: Igor <igor@armbian.com>
