201ea04c17
5 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Aditya Prayoga
|
6caf9e2dce |
[mvebu-next] Fix wrong dtb path on bootscript
Signed-off-by: Aditya Prayoga <aditya@kobol.io> |
||
Aditya Prayoga
|
e261c6f828 |
Move mvebu DEFAULT, NEXT and DEV branch to next kernel (LTS) and U-boot #1426 (#1487)
* Initial Mvebu RFC https://github.com/armbian/build/issues/1426 Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com> * mvebu: add missing patches Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com> * mvebu: change making u-boot targets to standard way, adjust patches and config Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com> * helios4: set default branch to use U-Boot 2018.11 Switch over to U-Boot 2018.11 that has been used for some time in next branch. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: helios4: Enable DEV branch Signed-off-by: Aditya Prayoga <aditya@kobol.io> * u-boot: Add RTC support on Clearfog and Helios4 Added DM driver for mvebu RTC and enable it on Clearfog and Helios4 configuration. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * add boot-marvell.cmd backward compatibility The patches added missing variable that used on boot-marvell.cmd and also adjust the some memory addresses to prevent crash due to usage of fdt_high and initrd_high. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * helios4: Added SPI NOR flash target Build bootable SPI NOR flash image. Change the boot order to USB -> SATA -> MMC Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Restore SPI support on U-Boot 2019.04 * mvebu: kernel: Added Wake-On-GPIO and WoL support The patch set was missing during transition. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * [#1429] SolidRun's ARMADA A388 SOM U-Boot ODT Update Old versions of U-Boot did not configure correctly the ODT on data signals of DDR RAM on SolidRun's ARMADA A388 SOMs. According to SolidRun Knowledge Base, the changes already pushed to mainline U-Boot. But then it was overwritten when Marvell DDR Training Tool updated [URL] https://developer.solid-run.com/knowledge-base/armada-38x-som-u-boot-odt-update/ Signed-off-by: Aditya Prayoga <aditya@kobol.io> * [#1429] mvebu: u-boot: Add revision id for Armada 38x B0 Added patch for SolidRun U-Boot v2018.01 and for Helios4 U-Boot v2018.11 Signed-off-by: Aditya Prayoga <aditya@kobol.io> * clearfog: Added SPI NOR flash target Build bootable SPI NOR flash image. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: clearfog: DEV branch use mainline U-Boot Also move clearfog base patch into its own board folder. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: enable U-Boot uart target Normal MMC image can be used for uart boot using following command: ./tools/kwboot -b u-boot-spl.kwb /dev/ttyUSBX But on Helios4, the SPL failed to continue the booting process if ECC is enabled, so disable it. Since the usage of uart boot is more for rescue/debug, disable autoboot. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: NEXT branch use mainline U-Boot Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: helios4: fix fancontrol related bug during buster testing - On kernel 4.19, cpu thermal sensor changed the name from armada_thermal into f10e4078.thermal. Added this new name to udev rules - Since DEFAULT branch now use kernel 4.14, update fancontrol configuration - Load lm75 kernel module - On kernel 4.19, cpu temp reading about 20 degree C lower, update fancontrol configuration. [URL] https://forum.armbian.com/topic/10214-clearfogpro-possible-change-in-temperature-reporting-between-414next-and-419dev Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: helios4: Override vendor provided fancontrol unit systemd emit following message on dmesg systemd[1]: /lib/systemd/system/fancontrol.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/fancontrol.pid \xe2\x86\x92 /run/fancontrol.pid; please update the unit file accordingly. Override and change the value in the unit file to remove the message. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: DEV branch use its own u-boot patch folder The patches are copied over from u-boot-mvebu-next Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: u-boot: Make clearfog model distinction more obvious While at it, also change SerDes LANE4 into USB 3.0 on Clearfog Base. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * lib: Use apt-get install instead of dpkg on install_deb_chroot() dpkg -i does not install dependencies required by the package. This is needed if the BSP package requires other package that is not installed during debootstrap. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * config: mvebu: helios4: Move various tweak to family_tweak_bsp() Various tweak in family_tweaks_s() only applied to SD card image. Move it to family_tweaks_bsp() so it will also included on the BSP package and applied to existing user. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * config: mvebu: helios4: Add /etc/modules to BSP On kernel 4.19, user need to modify the /etc/modules to add lm75 kernel module. Pack the file into BSP so user no longer needed to modify it. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: kernel: Make zbud as built-in module To remove the following error: [ 1.705485] zswap: default zpool zbud not available [ 1.705488] zswap: pool creation failed Signed-off-by: Aditya Prayoga <aditya@kobol.io> * bootscripts: mvebu: Add default value for spi_workaround Signed-off-by: Aditya Prayoga <aditya@kobol.io> * mvebu: kernel: Backport armada_thermal changes to 4.14 (#1452) On kernel 4.19, armada_thermal driver has been fixed to address Marvell's Errata #132698 (The changes first appear on LK 4.16). The result is temperature reading is around 20 degree Celsius lower. Currently armbian-motd apply -20C tweak for both LK 4.14 and LK 4.19 which is incorrect. Instead of adding some logic on what condition to apply the tweak, it is better to remove the tweak and patch the kernel instead. Revert commit |
||
Gauthier Provost
|
14452e25e6 |
Helios4: Changes / fixes related to bootscript issue (#1169)
* helios4: next branch use u-boot 2018 use new u-boot based on upstream 2018 Signed-off-by: Aditya Prayoga <aditya@kobol.io> * helios4: Tweak fancontrol configuration Adjusted MINSTART and MINSTOP to suit both old and new fan. Adjusted TEMP threshold so fan would stop or run in minimal speed when the system idle. Fixed wrong MINPWM value. URL:https://wiki.kobol.io/pwm/#configuration-file Signed-off-by: Aditya Prayoga <aditya@kobol.io> * kernel: mvebu-next: use upstream helios4 dts Helios4 device tree has been merged on upstream since 4.19. Rework the patch to produce same device tree. URL:https://patchwork.kernel.org/patch/10449393/ Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: Use boot-mvebu-next bootscript Use boot-mvebu-next.cmd that make use of upstream's Generic Distro Configuration. Since loadaddr and fdt_addr varibales are no longer required, remove the patch. Signed-off-by: Aditya Prayoga <aditya@kobol.io> * Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue Concurrent access on SPI NOR and SATA drives can lead to unstable SATA. Therefore as workaround, disable SATA controller when SPI flash access is needed and make it as user configurable item in armbianEnv.txt This workaround might applies to Clearfog too. Refer to Commit |
||
|
aprayoga
|
e71d1560f0 |
Helios4: various updates (#1161)
* helios4: next branch use u-boot 2018
use new u-boot based on upstream 2018
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Tweak fancontrol configuration
Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.
URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: use upstream helios4 dts
Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.
URL:https://patchwork.kernel.org/patch/10449393/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Use boot-mvebu-next bootscript
Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Refer to
Commit
|
||
zador-blood-stained
|
aba730f488 |
Add mvebu dev branch
It uses the same kernel as next, but it uses mainline u-boot with DT overlay support, but without SPI, USB and possibly SATA support |