Ricardo Pardini
1f6403cb96
linux-uefi-x86-current: rewrite config against 6.18.5
2026-01-14 23:58:01 +01:00
Ricardo Pardini
9a655b7d33
linux-meson64-current: recover options lost during 6.12 -> 6.18 bump
...
- ... sorry!
2026-01-14 23:58:01 +01:00
Ricardo Pardini
43524cc6a5
linux-meson64-current: rewrite against 6.18.5
...
- I messed up, so normalize first...
2026-01-14 23:58:01 +01:00
Jianfeng Liu
4cb522e968
rockchip64-current: sync config from edge
2026-01-14 17:03:02 +01:00
Jianfeng Liu
73aab5ff66
rockchip64-edge: enable Verisilicon IOMMU for Rockchip RK3588
2026-01-13 20:39:02 +01:00
Jianfeng Liu
9eb346830d
rockchip64-current: enable Verisilicon IOMMU for Rockchip RK3588
2026-01-13 20:39:02 +01:00
EvilOlaf
fe7b8eee12
orangepizero2: fix bluetooth in edge kernel
2026-01-13 20:38:30 +01:00
Ricardo Pardini
22f72c064b
linux-genio-collabora: built-in boot-essential; add crypto & squashfs stuff
...
- modules -> built-in: essential stuff for accessing UFS/eMMC storage, regulators, i2c, spi
- add in-kernel crypto modules (for wifi) & squashfs compression
- somehow `CONFIG_PCI_MESON` was left enabled here, disable
2026-01-12 19:18:57 +01:00
TuAFBogey
e5752ad9ee
Run rewrite-kernel-config for proper defconfig format
2026-01-12 13:18:53 +01:00
TuAFBogey
c9f8f3caef
Address rpardini review: remove BTF patches, use full kernel config, use fetch_from_repo for OP-TEE
2026-01-12 13:18:53 +01:00
TuAFBogey
9ecd83082e
fix: address review comments
...
- Rename board config to .csc (no maintainer)
- Remove duplicate board name from comment
- Change verbosity from 7 to 1 (default)
- Remove ATF patch, use ATF_SKIP_LDFLAGS_WL instead
- Move CONFIG_RD_* to kernel config (fix artifact caching)
- Fix networking comment (chrony -> NetworkManager)
- Replace -j12 with -j8
- Add fdt addr/resize after DTB reload on overlay error
2026-01-12 13:18:53 +01:00
TuAFBogey
c6e8c5b680
board: add Nuvoton MA35D1 NuMaker IoT board support
...
Add support for Nuvoton MA35D1 SoC family:
- ARM Cortex-A35 dual-core @ 800MHz + Cortex-M4 heterogeneous
- NuMaker IoT MA35D16F90 board (512MB DDR)
- Vendor kernel 5.10.140 from Nuvoton GitHub
- TF-A (BL2/BL31) + OP-TEE (BL32) + U-Boot (BL33) boot chain
- SD card boot support
Vendor kernel modules (pending):
Nuvoton provides closed-source Verisilicon licensed drivers:
- dcultrafb.ko (DCUltra display controller)
- ma35d1-vc8000.ko (H.264 video codec)
- galcore.ko (GPU driver)
These modules require exact kernel vermagic match:
5.10.140-vendor-nuvoton-ma35d1 SMP mod_unload aarch64
Nuvoton is preparing custom builds of these modules for Armbian.
Signed-off-by: TuAFBogey <uguvenen@gmail.com>
2026-01-12 13:18:53 +01:00
EvilOlaf
324a4f5418
sunxi: Add CONFIG_TTY_OVERY_SDIO to edge kernel config
2026-01-11 23:13:22 +01:00
Igor Pecovnik
21f3af10ba
Drop USB wireless driver that doesn't want to compile
2026-01-09 08:17:19 +01:00
Ricardo Pardini
6cf92aa21c
linux-genio-collabora: enable USB Gadget stuff
...
- Genio has an actual USB3 UDC, so it makes sense to enable USB Gadget
options so one can try those out at (hopefully) 5Gbit/s
2026-01-08 12:09:02 +01:00
Ricardo Pardini
40a2619e19
linux-genio-collabora: disable all platforms except CONFIG_ARCH_MEDIATEK
...
- this is very obviously a single family kernel, no use having dtb's for
every other board here
- should make it a bit lighter to build too
2026-01-08 12:09:02 +01:00
Ricardo Pardini
1ba21aefe8
linux-genio-collabora: update defconfig, no changes (6.18 -> 6.19-rc1 bump)
2026-01-08 12:09:02 +01:00
rpardini
7f9d6633ba
Automatic: kernel config rewrite
2026-01-07 16:15:32 +01:00
Ricardo Pardini
88de6d8758
arm64-sc8280xp/thinkpad-x13s: recover PCIE_QCOM=y
...
- can't be a module anymore
2026-01-06 23:16:14 +01:00
Ricardo Pardini
fcd4bf1528
arm64-sc8280xp/thinkpad-x13s: pull steev's 6.18 qcom_laptops.config
...
- sanely disables a bunch of non-qcom stuff
- enables sched_ext, CONFIG_QCOM_TZMEM_MODE_SHMBRIDGE
2026-01-06 23:16:14 +01:00
Ricardo Pardini
76640a1798
arm64-sc8280xp/thinkpad-x13s: rewrite .config against steev's 6.18
...
- apparently PCIE_QCOM quit his job (not buildable as module anymore
- will revisit later
2026-01-06 23:16:14 +01:00
Ricardo Pardini
db0b46bfd8
arm64-sc8280xp/thinkpad-x13s: rewrite .config against steev's 6.17
2026-01-06 23:16:14 +01:00
Paolo Sabatino
911a160980
rockchip: other fixes and cleanups for current/edge kernels
...
* DFI driver fix to let DDR3 rk322x handle DMC driver
* edge kernel: removal for Gigabit Ethernet DMA
workaround for rk3288
* reinstate CONFIG_DEBUG_FS=y with both current/edge kernels
2026-01-06 18:13:52 +01:00
Paolo Sabatino
4ccaf7e473
rockchip: bump edge kernel to 6.19
2026-01-06 18:13:52 +01:00
Paolo Sabatino
329ec0626a
rockchip: bump current kernel to v6.18
2026-01-06 18:13:52 +01:00
Rosen Penev
f8bb6a1f30
kernel: mvebu: enable tickless idle
...
Switch to NO_HZ_IDLE for energy saving. Also enable Menu cpuidle
governor for tickless systems.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Igor Pecovnik <igor@armbian.com>
2025-12-29 09:25:02 +01:00
tabris
eaac082190
kernel configs - enable EROFS as module, ditto overlayfs & F2FS
2025-12-29 09:16:28 +01:00
Fabian Wolter
3aacc125a6
rockchip64: Fix IEP driver
2025-12-21 13:42:12 +01:00
Igor Pecovnik
6e12c118b2
WSL2: Drop UEFI images designed specially for WSL2 as they are not needed anymore
2025-12-18 14:17:39 +01:00
Patrick Yavitz
4614131784
SpacemiT: EDGE: Remove # CONFIG_MODULE_SIG is not set
...
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-12-16 14:24:48 -05:00
Patrick Yavitz
6ed0845292
Update spacemit edge defconfig
...
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
2025-12-16 14:24:48 -05:00
simple
7106434581
Enable CONFIG_SND_SOC_RT5651
2025-12-11 14:22:14 +01:00
Ricardo Pardini
7460168a98
rockchip64-edge (6.18): enable Realtek DSA switches (NET_DSA_REALTEK_RTL8365MB)
...
- for the Radxa E24C
2025-12-11 04:36:51 +08:00
Jianfeng Liu
e34c660423
rockchip64-edge: enable CONFIG_ROCKCHIP_DW_DP
2025-12-10 00:41:25 +01:00
Ricardo Pardini
ed4ede9429
config/kernel: (many) change CONFIG_DUMMY=y to =m
...
- having CONFIG_DUMMY=y causes a fake/dummy interface `dummy0` to be
_always_ present
- that in turn can confuse things like cloud-init in nocloud-net mode
- changing it to module, it can still be used (just modprobe)
- I found this using `linux-rk35xx-vendor`, but I reason it applies to
all kernels; most other kernels already have it `=m`
2025-12-04 18:40:12 +01:00
Andrew Davis
6f4e67b936
ti: configs: Update K3 kernel configs ( #9019 )
...
A couple of these configs have gotten out of sync with is making it
difficult for the automation scripting to properly re-write these
configs correctly. Mostly due to the "edge" kernel being updated
to the latest v6.18 kernel, but also due to the RT config not being
updated in some time. Manually update these configs and check for
correctness.
Signed-off-by: Andrew Davis <afd@ti.com>
2025-12-02 10:26:59 -06:00
Mecid
676832645d
Genio: Collabora Kernel config post rewrite
2025-12-01 22:27:42 +01:00
Mecid
5364b6806b
Genio: Update Linux Kernel config
...
Based on: ba2528bd91/arch/arm64/configs/defconfig
2025-12-01 22:27:42 +01:00
Mecid Urganci
5540a53860
Rock5B+: Udev rule for Radxa Display 8HD
2025-11-22 09:30:37 +01:00
Bohdan Chubuk
bdc6221d10
sunxi64: Enable KVM virtualization support for current kernel
2025-11-22 09:30:24 +01:00
Jonas Wood
9e2309a943
ti: configs: boards: Add AM62L EVM (tmds62levm) board support
...
Signed-off-by: Jonas Wood <jw@ti.com>
2025-11-19 22:19:34 +01:00
Jonas Wood
7e4ba322ec
ti: configs: family: k3: Add upstream edge branch
...
Signed-off-by: Jonas Wood <jw@ti.com>
2025-11-17 08:58:36 +01:00
Jonas Wood
f2b431d286
ti: configs: family: k3: Change current/edge to vendor/vendor-edge
...
Signed-off-by: Jonas Wood <jw@ti.com>
2025-11-17 08:58:36 +01:00
retro98boy
0b8ada7381
sm8250 current: Select all USB CAN adapters under the CAN USB interfaces menu as M
2025-11-16 12:36:40 +01:00
retro98boy
03523c0d88
sm8250 current: Select all USB network adapters under the USB_NET_DRIVERS menu as M
2025-11-16 12:36:40 +01:00
Igor Pecovnik
794cc8fb3a
Rockchip64: enable Qcom ath12 (wifi 7) support
2025-11-13 08:44:32 +01:00
Andrew Davis
3a0247ff94
pocketbeagle2: Update current(-rt) kernel branch
...
Update to the latest Beagle Linux kernel branch and
update configs for the same.
Signed-off-by: Andrew Davis <afd@ti.com>
2025-11-11 22:46:36 +01:00
Andrew Davis
44ea6ec494
pocketbeagle2: Remove edge branch
...
The "current" and "edge" branches point to the same kernel and u-boot.
No need to have both so just remove "edge" as it was not any more
up-to-date than the standard "current" branch.
Signed-off-by: Andrew Davis <afd@ti.com>
2025-11-11 22:46:36 +01:00
Igor Pecovnik
d10bce1179
In order to support rk3588j, CONFIG_NVMEM_ROCKCHIP_OTP has to be set to Y
2025-11-11 21:06:56 +01:00
Ricardo Pardini
7734c000ad
rockchip-rv1106: .config: remove a few WLAN_VENDOR =n's manually
...
- rockchip-rv1106: .config: remove WLAN_VENDOR_MEDIATEK `=n` manually
- rockchip-rv1106: .config: remove WLAN_VENDOR_RALINK `=n` manually
- rockchip-rv1106: .config: remove WLAN_VENDOR_MARVELL `=n` manually
- rockchip-rv1106: .config: remove WLAN_VENDOR_ATMEL `=n` manually
- rockchip-rv1106: .config: remove WLAN_VENDOR_ATH `=n` manually
- rockchip-rv1106: .config: remove WLAN_VENDOR_REALTEK `=n` manually
- those are hard dependencies for a bunch of wifi opts that are `=m`
2025-11-09 19:36:55 +01:00