Currently armbianmonitor -n does not detect vlan interfaces correctly.
This is because of an incorrect egrep -o which filters out the parent interface name:
network interface: 100
instead of
network interface: eth0.100
Cascading into:
armbianmonitor: line 1095: eth0. - 0 : syntax error: invalid arithmetic operator (error token is ". - 0 ")
Fixed by changing the egrep logic to filter out the last field of route -n output.
Also fixes a timer issue by moving the timer start to after the interface selection.
time controller adjustment: -2.43
/usr/bin/armbianmonitor: line 1128: read: -2.43: invalid timeout specification
* At first login we set users locales based on his location which seems to be to agressive
Add a question before setting it should suffice. Closing https://github.com/armbian/build/issues/2398
* Read it silently
* Detect locales selection only if we choose to add normal user
* Asking for shell right after seting root password
* Move selections inside traps
* Remove duplicated call
* Add support for configuring CPU temperature offset
Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures.
For more details, see https://forum.armbian.com/topic/11534-orange-pi-zero-lts-incorrect-temps-reported/
* Update armbian-motd.dpkg-dist
Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Added 2 configuration parameters to armbian-zram-config.
First paramter (SWAP=) can explicitely disable zram swap (while leaving log and tmp untouched).
Second parameter (TMP_SIZE) can be used to explicitely set tmp ramdisk size.
The behaviour of existing configurations is not changed.
New function activate_zram() to initialize zram devices and parameters.
Changed script to use zramctl to more flexibly establish zram devices to use for log and tmp.
This also fixes issues which result from both armbian-zram-config and armbian-ramlog being hardcoded to use zram0
* Add support for ZSH / TMUX / oh-my-zsh
* Selecting default shell at 1st run
* Install ZSH by default except on minimal image
* Lets rather create armbian-zsh package
* - fix remaining ZSH problems
- add systemd timer to remove default desktop autologin feature
- change DESKTOP_AUTOLOGIN to disabled by default
* Few small improvements
* Oneliner for revering all users back to BASH if package is uninstalled
* Properly escape variables
* Fixing chmod
* More cryptic awk magic to fix permissions for all normal users that are getting zsh magic
* Move default values where they should be and fix for updates not showing up
* Add support for vnstat and ZFS
* Cosmetical
* Put defaults back
* Update data displaying
* Add support for displaying "reboot required" when regular packages like e.g. dbus requires a reboot
* Add dependency problem check
* Also add storage to user defaults
* sunxi: kernel: current/dev: enable sun6i-csi and disable LL debug on UART0
The former is useful on some boards, e.g. PineCube.
The latter blocks boards that do not utilize UART0 from booting.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add new family sun8i-v3s
This family is intended for boards with V3/V3s/S3/S3L chips and low
DRAM capacity.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: add PineCube board
This board features Sochip S3 SoC (Allwinner V3 die + co-packaged 128MiB
DRAM), and an OmniVision OV5640 camera is shipped with the board.
Add support for it. It could be used as an IP camera then.
Kernel support is only added to current/dev branch, with dev just using
mainline-merged DT and current using backported DT from 5.10-rc.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* sunxi: kernel: current/dev: add V3s OHCI/EHCI nodes
These are needed for USB host on V3s boards to work.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
* update fancontrol configuration
* Enable network activity led, default to eth0
* Do not disable auto poweron on power loss event
* Added UPS timer
Provide timer to poweroff system after 600 s (10 minutes) of power loss
event. If power restored within that time window, cancel the timer.
* Use different service for legacy
LK 4.4 does not have ledtrig-netdev, so it will cause the service to
fail.
* Use 10m instead 600 seconds in UPS timer
Systemd time can use m suffix for minutes. Use this to make it easier to
read.
Right now, you simply cannot choose between different DE's installed on the system. The session indicator uses very little space, and doesn't clutter the greeter.
I noticed it was missing when trying to integrate a Kodi session. It will be useful in the future also, when we incorporate more DE's than Xfce
* armbian-hardware-optimization: delay applying eth0 tweak on rk3399
* armbian-hardware-optimization: delay applying eth0 tweak on rockchip64
* armbian-hardware-optimization: fixed irq smp affinity for usb
on rockchip64.
Similar like the one applied to rk3399 on commit [eaf6853]
* Change Ubuntu Eoan to Ubuntu Groovy and enable it as CSC
Tested CLI and desktop image, but needs cache creation and repository before it will be possible to build without error.
* Update Groovy compiler for chroot
* Adjust pkg dependencies for groovy
Sadly htop doesn't build
Pinebook-Pro Support:
suspend to idle via key and lid close
brightness keys
volume control keys
wifi, bluetooth frimware
touchpad tweaks
keyboard config
armbian-hardware-optimization
bootsplash
Co-authored-by: Britt Dodd <britt@reactornet.net>
- Chanaged default x.org configuration to disable glamor
- Reintroduce patch to use DRM cursor plane as overlay in rk322x-current and -dev
- Updated wifi patches for kernel 5.8.10
- Bumped rk322x to u-boot v2020.07, removed reserved zones from device trees
- Updated OPTEE to v3.10, using ddrbin v1.10
- Bumped rk322x-current to kernel 5.8.y
- Imported new patches from knaerzche's LibreELEC fork for rk322x-dev (kernel 5.8.y)
- Adjusted existing patches to match changes, updated rk322x-dev kernel config file
- Add default modprobe conf file for esp8089 to force the crystal frequency to 40Mhz for rk322x targets
- Removed ssv6051 firmware packages to move to armbian-firmware repository
- Switching ssv6051-wifi.cfg to /lib/firmware for rk322x-legacy
- Removed P2P interface for esp8089 driver for rk322x-legacy
- Optimized ssv6051 performance: kernel module gains -Os flag, disabled p2p interface, enabled HW crypto for CCMP cipher
- Enabled remote control interface, IR GPIO kernel module and HDMI CEC modules
