enoch/armbian-build
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Adjusted NanoPi M1 fex to Armbian defaults

Browse Source
This commit is contained in:
ThomasKaiser 2016-03-23 13:26:29 +01:00
parent b892ee817e
commit eef30204b2
6 changed files with 63 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

87
config/nanopim1.fex
View File

@ -36,7 +36,7 @@ led_state = 0
[boot_init_gpio]
used = 1
gpio0 = port:PA10<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
[recovery_para]
@ -166,14 +166,14 @@ uart_rx = port:PA05<2><1><default><default>
[uart1]
uart_used = 0
uart_port = 1
uart_type = 2
uart_type = 4
uart_tx = port:PG06<2><1><default><default>
uart_rx = port:PG07<2><1><default><default>
uart_rts = port:PG08<2><1><default><default>
uart_cts = port:PG09<2><1><default><default>
[uart2]
uart_used = 1
uart_used = 0
uart_port = 2
uart_type = 4
uart_tx = port:PA00<2><1><default><default>
@ -182,7 +182,7 @@ uart_rts = port:PA02<2><1><default><default>
uart_cts = port:PA03<2><1><default><default>
[uart3]
uart_used = 1
uart_used = 0
uart_port = 3
uart_type = 4
uart_tx = port:PA13<3><1><default><default>
@ -250,13 +250,13 @@ blue_led_active_low = 0
[ths_para]
ths_used = 1
ths_trip1_count = 5
ths_trip1_count = 6
ths_trip1_0 = 70
ths_trip1_1 = 80
ths_trip1_2 = 90
ths_trip1_3 = 100
ths_trip1_4 = 105
ths_trip1_5 = 0
ths_trip1_2 = 85
ths_trip1_3 = 90
ths_trip1_4 = 95
ths_trip1_5 = 100
ths_trip1_6 = 0
ths_trip1_7 = 0
ths_trip1_0_min = 0
@ -268,9 +268,9 @@ ths_trip1_2_max = 3
ths_trip1_3_min = 3
ths_trip1_3_max = 4
ths_trip1_4_min = 4
ths_trip1_4_max = 4
ths_trip1_5_min = 0
ths_trip1_5_max = 0
ths_trip1_4_max = 5
ths_trip1_5_min = 5
ths_trip1_5_max = 5
ths_trip1_6_min = 0
ths_trip1_6_max = 0
ths_trip2_count = 1
@ -281,8 +281,8 @@ cooler_count = 5
cooler0 = "1200000 4 4294967295 0"
cooler1 = "1008000 4 4294967295 0"
cooler2 = "816000 4 4294967295 0"
cooler3 = "504000 4 4294967295 0"
cooler4 = "504000 1 4294967295 0"
cooler3 = "648000 2 4294967295 0"
cooler3 = "480000 1 4294967295 0"
[nand0_para]
nand_support_2ch = 0
@ -320,9 +320,9 @@ hdmi_mode_check = 1
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 10
screen1_output_type = 2
screen1_output_mode = 14
screen0_output_mode = 5
screen1_output_type = 3
screen1_output_mode = 5
fb0_format = 0
fb0_width = 0
fb0_height = 0
@ -493,7 +493,7 @@ sdc_ddrmode = 1
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_detect_type = 0
usb_id_gpio = port:PG12<0><1><default><default>
usb_det_vbus_gpio = port:PG12<0><1><default><default>
usb_drv_vbus_gpio = port:PL02<1><0><default><0>
@ -654,6 +654,32 @@ hdmi_used = 1
[s_cir0]
ir_used = 1
ir_rx = port:PL11<2><1><default><default>
ir_power_key_code0 = 87
ir_addr_code0 = 40704
ir_power_key_code1 = 26
ir_addr_code1 = 64260
ir_power_key_code2 = 20
ir_addr_code2 = 32640
ir_power_key_code3 = 21
ir_addr_code3 = 32640
ir_power_key_code4 = 11
ir_addr_code4 = 63240
ir_power_key_code5 = 3
ir_addr_code5 = 239
ir_power_key_code6 = 159
ir_addr_code6 = 19635
ir_power_key_code7 = 10
ir_addr_code7 = 30536
ir_power_key_code8 = 69
ir_addr_code8 = 48386
ir_power_key_code9 = 77
ir_addr_code9 = 56865
ir_power_key_code10 = 24
ir_addr_code10 = 65025
ir_power_key_code11 = 87
ir_addr_code11 = 65280
ir_power_key_code12 = 77
ir_addr_code12 = 65344
[cir]
ir_used = 0
@ -669,24 +695,11 @@ pmu_level0 = 11300
pmu_level1 = 1100
max_freq = 1200000000
min_freq = 480000000
boot_freq = 1008000000
LV_count = 8
LV_count = 2
LV1_freq = 1200000000
LV1_volt = 1300
LV2_freq = 1008000000
LV2_volt = 1200
LV3_freq = 0
LV3_volt = 1100
LV4_freq = 0
LV4_volt = 1100
LV5_freq = 0
LV5_volt = 1100
LV6_freq = 0
LV6_volt = 1100
LV7_freq = 0
LV7_volt = 1100
LV8_freq = 0
LV8_volt = 1100
LV2_freq = 480000000
LV2_volt = 1100
[gpu_dvfs_table]
G_LV_count = 3
@ -758,12 +771,18 @@ din_gpio = port:PD00<1><default><default><1>
clk_gpio = port:PD01<1><default><default><1>
stb_gpio = port:PD02<1><default><default><1>
;----------------------------------------------------------------------------------
;mali parameters
;----------------------------------------------------------------------------------
[mali_para]
mali_used = 1
mali_clkdiv = 1
mali_extreme_freq = 600
mali_extreme_vol = 1400
;----------------------------------------------------------------------------------
;1wire parameters (default - PA20)
;----------------------------------------------------------------------------------
[w1_para]
w1_used = 1
gpio = 20

4
config/orangepi2.fex
View File

@ -57,7 +57,7 @@ fel_key_min =02
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PL10<1><default><default><default>
next_work = 3
;---------------------------------------------------------------------------------
@ -85,7 +85,7 @@ led_state = 0
;-------------------------------------------------------------------------------
[boot_init_gpio]
used = 1
gpio0 = port:PA15<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
;----------------------------------------------------------------------------------

4
config/orangepilite.fex
View File

@ -22,7 +22,7 @@ fel_key_min = 2
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PL10<1><default><default><default>
next_work = 3
[box_start_os]
@ -36,7 +36,7 @@ led_state = 0
[boot_init_gpio]
used = 1
gpio0 = port:PA15<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
[recovery_para]

4
config/orangepione.fex
View File

@ -22,7 +22,7 @@ fel_key_min = 2
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PL10<1><default><default><default>
next_work = 3
[box_start_os]
@ -36,7 +36,7 @@ led_state = 0
[boot_init_gpio]
used = 1
gpio0 = port:PA15<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
[recovery_para]

4
config/orangepipc.fex
View File

@ -22,7 +22,7 @@ fel_key_min = 2
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PL10<1><default><default><default>
next_work = 3
[box_start_os]
@ -36,7 +36,7 @@ led_state = 0
[boot_init_gpio]
used = 1
gpio0 = port:PA15<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
[recovery_para]

4
config/orangepiplus.fex
View File

@ -59,7 +59,7 @@ fel_key_min =02
logical_start = 40960
sprite_work_delay = 500
sprite_err_delay = 200
sprite_gpio0 = port:PA15<1><default><default><default>
sprite_gpio0 = port:PL10<1><default><default><default>
next_work = 3
;---------------------------------------------------------------------------------
@ -87,7 +87,7 @@ led_state = 0
;-------------------------------------------------------------------------------
[boot_init_gpio]
used = 1
gpio0 = port:PA15<1><default><default><1>
gpio0 = port:PL10<1><default><default><1>
gpio1 = port:PG11<1><default><default><1>
;----------------------------------------------------------------------------------