cm3588-nas: switch edge uboot to kwiboo mainline

config/boards/nanopc-cm3588-nas.csc

@@ -37,3 +37,27 @@ function post_family_tweaks__nanopccm3588nas_udev_naming_network_interfaces() {
 		SUBSYSTEM=="net", ACTION=="add", KERNELS=="0004:41:00.0", NAME:="eth0"
 	EOF
 }
+
+# Mainline u-boot or Kwiboo's tree
+function post_family_config_branch_edge__rock-5b_use_mainline_uboot() {
+	display_alert "$BOARD" "mainline (next branch) u-boot overrides for $BOARD / $BRANCH" "info"
+
+	unset BOOTFS_TYPE                                                     # mainline can boot from ext4 no problem
+	declare -g BOOTCONFIG="nanopc-t6-rk3588_defconfig"                       # override the default for the board/family
+	declare -g BOOTDELAY=1                                                # Wait for UART interrupt to enter UMS/RockUSB mode etc
+	declare -g BOOTSOURCE="https://github.com/Kwiboo/u-boot-rockchip.git" # We ❤️ Kwiboo's tree
+	declare -g BOOTBRANCH="branch:rk3xxx-2024.04"                         # commit:31522fe7b3c7733313e1c5eb4e340487f6000196 as of 2024-04-01
+	declare -g BOOTPATCHDIR="v2024.04-cm3588nas"                       # empty; defconfig changes are done in hook below
+	declare -g BOOTDIR="u-boot-${BOARD}"                                  # do not share u-boot directory
+	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
+	}
+
+	function write_uboot_platform_mtd() {
+		flashcp -v -p "$1/u-boot-rockchip-spi.bin" /dev/mtd0
+	}
+}