Add Libretech Tritium NEXT u-boot and kernel target, HDMI enabled, untested ... as CSC target
This commit is contained in:
Igor Pecovnik
parent
cebc0777e2
commit
2c613401fb
24
config/boards/tritium.csc
Normal file
24
config/boards/tritium.csc
Normal file
@ -0,0 +1,24 @@
|
||||
# H3 quad core 512MB/1Gb/2Gb SoC eMMC
|
||||
BOARD_NAME="Tritium"
|
||||
BOARDFAMILY="sun8i"
|
||||
BOOTCONFIG="librecomputer_tritium_defconfig"
|
||||
#
|
||||
MODULES="#w1-sunxi #w1-gpio #w1-therm #sunxi-cir hci_uart rfcomm hidp dhd g_serial"
|
||||
MODULES_NEXT="g_serial"
|
||||
DEFAULT_OVERLAYS="usbhost1 usbhost2"
|
||||
CPUMIN="240000"
|
||||
CPUMAX="912000"
|
||||
#
|
||||
KERNEL_TARGET="next"
|
||||
CLI_TARGET=""
|
||||
|
||||
CLI_BETA_TARGET=""
|
||||
#
|
||||
RECOMMENDED=""
|
||||
#
|
||||
BOARDRATING=""
|
||||
CHIP="http://docs.armbian.com/Hardware_Allwinner-H3/"
|
||||
HARDWARE="https://libre.computer/products/boards/all-h3-cc/"
|
||||
FORUMS="http://forum.armbian.com/index.php/forum/13-allwinner-h3/"
|
||||
MISC3="<a href=http://forum.armbian.com/index.php/topic/1614-running-h3-boards-with-minimal-consumption/>Minimize consumption</a>"
|
||||
BUY=""
|
||||
255
patch/kernel/sunxi-next/add-h3-librecomputer.patch
Normal file
255
patch/kernel/sunxi-next/add-h3-librecomputer.patch
Normal file
@ -0,0 +1,255 @@
|
||||
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
|
||||
index 3c139c63098f..aa68f719692f 100644
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
+++ b/arch/arm/boot/dts/Makefile
|
||||
@@ -953,6 +953,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
|
||||
sun8i-h2-plus-orangepi-zero.dtb \
|
||||
sun8i-h3-bananapi-m2-plus.dtb \
|
||||
sun8i-h3-beelink-x2.dtb \
|
||||
+ sun8i-h3-libretech-tritium.dtb \
|
||||
sun8i-h3-nanopi-m1.dtb \
|
||||
sun8i-h3-nanopi-m1-plus.dtb \
|
||||
sun8i-h3-nanopi-neo.dtb \
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-tritium.dts b/arch/arm/boot/dts/sun8i-h3-libretech-tritium.dts
|
||||
new file mode 100644
|
||||
index 000000000000..d406571a0dd6
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3-libretech-tritium.dts
|
||||
@@ -0,0 +1,237 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
|
||||
+ * Copyright (C) 2017 Armbian
|
||||
+ *
|
||||
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
+ */
|
||||
+
|
||||
+/dts-v1/;
|
||||
+#include "sun8i-h3.dtsi"
|
||||
+#include "sunxi-common-regulators.dtsi"
|
||||
+#include <dt-bindings/gpio/gpio.h>
|
||||
+#include <dt-bindings/input/input.h>
|
||||
+
|
||||
+/ {
|
||||
+ model = "Libre Computer Board ALL-H3-CC H3";
|
||||
+ compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
|
||||
+
|
||||
+ aliases {
|
||||
+ ethernet0 = &emac;
|
||||
+ serial0 = &uart0;
|
||||
+ };
|
||||
+
|
||||
+ chosen {
|
||||
+ stdout-path = "serial0:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ connector {
|
||||
+ compatible = "hdmi-connector";
|
||||
+ type = "a";
|
||||
+
|
||||
+ port {
|
||||
+ hdmi_con_in: endpoint {
|
||||
+ remote-endpoint = <&hdmi_out_con>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+ leds {
|
||||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ pwr_led {
|
||||
+ label = "librecomputer:green:pwr";
|
||||
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ status_led {
|
||||
+ label = "librecomputer:blue:status";
|
||||
+ gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ gpio_keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ power {
|
||||
+ label = "power";
|
||||
+ linux,code = <KEY_POWER>;
|
||||
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc1v2: vcc1v2 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc1v2";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ vin-supply = <®_vcc5v0>;
|
||||
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ vin-supply = <®_vcc5v0>;
|
||||
+ };
|
||||
+
|
||||
+ /* This represents the board's 5V input */
|
||||
+ reg_vcc5v0: vcc5v0 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc5v0";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc_dram: vcc-dram {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-dram";
|
||||
+ regulator-min-microvolt = <1500000>;
|
||||
+ regulator-max-microvolt = <1500000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ vin-supply = <®_vcc5v0>;
|
||||
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
+ reg_vcc_io: vcc-io {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-io";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ vin-supply = <®_vcc3v3>;
|
||||
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
|
||||
+ };
|
||||
+
|
||||
+ reg_vdd_cpux: vdd-cpux {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vdd-cpux";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-boot-on;
|
||||
+ vin-supply = <®_vcc5v0>;
|
||||
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&codec {
|
||||
+ allwinner,audio-routing =
|
||||
+ "Line Out", "LINEOUT",
|
||||
+ "MIC1", "Mic",
|
||||
+ "Mic", "MBIAS";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&de {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi_out {
|
||||
+ hdmi_out_con: endpoint {
|
||||
+ remote-endpoint = <&hdmi_con_in>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2s2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mixer0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&sound_hdmi {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tcon0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&emac {
|
||||
+ phy-handle = <&int_mii_phy>;
|
||||
+ phy-mode = "mii";
|
||||
+ allwinner,leds-active-low;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ir {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&ir_pins_a>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc0_pins_a>;
|
||||
+ vmmc-supply = <®_vcc_io>;
|
||||
+ bus-width = <4>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
|
||||
+ cd-inverted;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_pins_a>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ /* VBUS on USB ports are always on */
|
||||
+ usb0_vbus-supply = <®_vcc5v0>;
|
||||
+ usb1_vbus-supply = <®_vcc5v0>;
|
||||
+ usb2_vbus-supply = <®_vcc5v0>;
|
||||
+ usb3_vbus-supply = <®_vcc5v0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
133
patch/u-boot/u-boot-sunxi/add-tritium.patch
Normal file
133
patch/u-boot/u-boot-sunxi/add-tritium.patch
Normal file
@ -0,0 +1,133 @@
|
||||
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
|
||||
new mode 100644
|
||||
index d1bd78c..f268593
|
||||
--- a/arch/arm/dts/Makefile
|
||||
+++ b/arch/arm/dts/Makefile
|
||||
@@ -317,6 +317,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
|
||||
sun8i-h3-orangepi-lite.dtb \
|
||||
sun8i-h3-orangepi-one.dtb \
|
||||
sun8i-h3-beelink-x2.dtb \
|
||||
+ sun8i-h3-libretech-tritium.dtb \
|
||||
sun8i-h3-orangepi-pc.dtb \
|
||||
sun8i-h3-orangepi-pc-plus.dtb \
|
||||
sun8i-h3-orangepi-plus.dtb \
|
||||
diff --git a/arch/arm/dts/sun8i-h3-libretech-tritium.dts b/arch/arm/dts/sun8i-h3-libretech-tritium.dts
|
||||
new file mode 100644
|
||||
index 0000000..515a3da
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/dts/sun8i-h3-libretech-tritium.dts
|
||||
@@ -0,0 +1,89 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
+ * Copyright (C) 2018 Armbian
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
+ * of the GPL or the X11 license, at your option. Note that this dual
|
||||
+ * licensing only applies to this file, and not this project as a
|
||||
+ * whole.
|
||||
+ *
|
||||
+ * a) This file is free software; you can redistribute it and/or
|
||||
+ * modify it under the terms of the GNU General Public License as
|
||||
+ * published by the Free Software Foundation; either version 2 of the
|
||||
+ * License, or (at your option) any later version.
|
||||
+ *
|
||||
+ * This file is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * Or, alternatively,
|
||||
+ *
|
||||
+ * b) Permission is hereby granted, free of charge, to any person
|
||||
+ * obtaining a copy of this software and associated documentation
|
||||
+ * files (the "Software"), to deal in the Software without
|
||||
+ * restriction, including without limitation the rights to use,
|
||||
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
+ * sell copies of the Software, and to permit persons to whom the
|
||||
+ * Software is furnished to do so, subject to the following
|
||||
+ * conditions:
|
||||
+ *
|
||||
+ * The above copyright notice and this permission notice shall be
|
||||
+ * included in all copies or substantial portions of the Software.
|
||||
+ *
|
||||
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
+ * OTHER DEALINGS IN THE SOFTWARE.
|
||||
+ */
|
||||
+
|
||||
+
|
||||
+#include "sun8i-h3-orangepi-one.dts"
|
||||
+
|
||||
+/ {
|
||||
+ model = "Librecomputer Tritium";
|
||||
+ compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3";
|
||||
+
|
||||
+ aliases {
|
||||
+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
|
||||
+ ethernet1 = &rtl8189ftv;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins_a>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ /*
|
||||
+ * Explicitly define the sdio device, so that we can add an ethernet
|
||||
+ * alias for it (which e.g. makes u-boot set a mac-address).
|
||||
+ */
|
||||
+ rtl8189ftv: sdio_wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <8>;
|
||||
+ non-removable;
|
||||
+ cap-mmc-hw-reset;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc2_8bit_pins {
|
||||
+ /* Increase drive strength for DDR modes */
|
||||
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
|
||||
+ /* eMMC is missing pull-ups */
|
||||
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
|
||||
+};
|
||||
diff --git a/configs/librecomputer_tritium_defconfig b/configs/librecomputer_tritium_defconfig
|
||||
new file mode 100644
|
||||
index 0000000..098fc05
|
||||
--- /dev/null
|
||||
+++ b/configs/librecomputer_tritium_defconfig
|
||||
@@ -0,0 +1,19 @@
|
||||
+CONFIG_ARM=y
|
||||
+CONFIG_ARCH_SUNXI=y
|
||||
+CONFIG_MACH_SUN8I_H3=y
|
||||
+CONFIG_DRAM_CLK=624
|
||||
+CONFIG_DRAM_ZQ=3881979
|
||||
+CONFIG_DRAM_ODT_EN=y
|
||||
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
||||
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-libretech-tritium"
|
||||
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
+CONFIG_SPL=y
|
||||
+# CONFIG_CMD_IMLS is not set
|
||||
+# CONFIG_CMD_FLASH is not set
|
||||
+# CONFIG_CMD_FPGA is not set
|
||||
+# CONFIG_SPL_DOS_PARTITION is not set
|
||||
+# CONFIG_SPL_ISO_PARTITION is not set
|
||||
+# CONFIG_SPL_EFI_PARTITION is not set
|
||||
+CONFIG_SUN8I_EMAC=y
|
||||
+CONFIG_USB_EHCI_HCD=y
|
||||
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
||||
Loading…
Reference in New Issue
Block a user