rockchip64-6.19: re-copy dt/ changed from 6.18 since 6.19 bump started
- hopefully I got them all
This commit is contained in:
Ricardo Pardini
parent
fa5ac4cdc8
commit
204dc67823
@ -0,0 +1,36 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2024 Radxa Computer (Shenzhen) Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
// From https://github.com/radxa/kernel/blob/linux-6.1-stan-rkr5.1/arch/arm64/boot/dts/rockchip/rk3528-radxa-e24c-spi.dts @8582469f117fdfd5d1ab88fa7e4e15c3b714bf24
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3528-radxa-e24c.dts"
|
||||
|
||||
/ {
|
||||
model = "Radxa E24C SPI";
|
||||
compatible = "radxa,e24c", "rockchip,rk3528";
|
||||
};
|
||||
|
||||
&sfc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fspi_csn0>, <&fspi_pins>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-tx-bus-width = <1>;
|
||||
vcc-supply = <&vcc1v8_emmc>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
status = "disabled";
|
||||
};
|
||||
574
patch/kernel/archive/rockchip64-6.19/dt/rk3528-radxa-e24c.dts
Normal file
574
patch/kernel/archive/rockchip64-6.19/dt/rk3528-radxa-e24c.dts
Normal file
@ -0,0 +1,574 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include "rk3528.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Radxa E24C";
|
||||
compatible = "radxa,e24c", "rockchip,rk3528";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac1;
|
||||
i2c0 = &i2c0;
|
||||
i2c1 = &i2c1;
|
||||
i2c5 = &i2c5;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
rtc0 = &hym8563;
|
||||
rtc1 = &rk805;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:1500000n8";
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "MASKROM";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio0_a0_user>;
|
||||
|
||||
button-user {
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "USER";
|
||||
linux,code = <BTN_1>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_HEARTBEAT;
|
||||
gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
label = "SYS";
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_g>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_WAN;
|
||||
gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
label = "WAN";
|
||||
linux,default-trigger = "stmmac-0:1d:user_mii:00:link";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wan_led_g>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
label = "LAN1";
|
||||
linux,default-trigger = "stmmac-0:1d:user_mii:01:link";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan1_led_g>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
label = "LAN2";
|
||||
linux,default-trigger = "stmmac-0:1d:user_mii:02:link";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan2_led_g>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_LAN;
|
||||
gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
label = "LAN3";
|
||||
linux,default-trigger = "stmmac-0:1d:user_mii:03:link";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lan3_led_g>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_mkey: regulator-3v3-vcc-mkey {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mkey_pwr_en>;
|
||||
regulator-name = "vcc3v3_mkey";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb20: regulator-5v0-vcc-usb20 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_en>;
|
||||
regulator-name = "vcc5v0_usb20";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_12v: regulator-12v0-vcc {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vccio_sd: regulator-vccio-sd {
|
||||
compatible = "regulator-gpio";
|
||||
gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_vol_ctrl_h>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
states = <1800000 0x0>, <3300000 0x1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* Common enable line for the avdd rails mentioned in the labels */
|
||||
vdd_switch: avddl_1v1: avddh_3v3: regulator-vdd-switch {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio_8367_en>;
|
||||
regulator-name = "vdd_switch";
|
||||
startup-delay-us = <10000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
/delete-property/ snps,tso;
|
||||
clock_in_out = "output";
|
||||
phy-mode = "rgmii-id";
|
||||
phy-supply = <&vdd_switch>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
|
||||
<&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
|
||||
status = "okay";
|
||||
|
||||
fixed-link {
|
||||
full-duplex;
|
||||
pause;
|
||||
speed = <1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_logic>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
rk805: pmic@18 {
|
||||
compatible = "rockchip,rk805";
|
||||
reg = <0x18>;
|
||||
#clock-cells = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_arm: DCDC_REG1 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic: DCDC_REG2 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1450000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: DCDC_REG4 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG1 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_emmc: LDO_REG2 {
|
||||
regulator-name = "vcc1v8_emmc";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v9_p: LDO_REG3 {
|
||||
regulator-name = "vdd_0v9_p";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "belling,bl24c16a", "atmel,24c16";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
vcc-supply = <&vcc_3v3>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_int_l>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
ethernet-switch@1d {
|
||||
compatible = "realtek,rtl8365mb";
|
||||
reg = <0x1d>;
|
||||
interrupt-parent = <&switch_intc>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1_rstn_l>, <&rtl8367rb_eint>;
|
||||
reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
|
||||
ethernet-ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethernet-port@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
phy-handle = <&switchphy0>;
|
||||
};
|
||||
|
||||
ethernet-port@1 {
|
||||
reg = <1>;
|
||||
label = "lan1";
|
||||
phy-handle = <&switchphy1>;
|
||||
};
|
||||
|
||||
ethernet-port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
phy-handle = <&switchphy2>;
|
||||
};
|
||||
|
||||
ethernet-port@3 {
|
||||
reg = <3>;
|
||||
label = "lan3";
|
||||
phy-handle = <&switchphy3>;
|
||||
};
|
||||
|
||||
ethernet-port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac1>;
|
||||
phy-mode = "rgmii";
|
||||
rx-internal-delay-ps = <2100>;
|
||||
tx-internal-delay-ps = <2000>;
|
||||
|
||||
fixed-link {
|
||||
full-duplex;
|
||||
pause;
|
||||
speed = <1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
switch_intc: interrupt-controller {
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switchphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
interrupts = <0>;
|
||||
};
|
||||
|
||||
switchphy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
interrupts = <1>;
|
||||
};
|
||||
|
||||
switchphy2: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
interrupts = <2>;
|
||||
};
|
||||
|
||||
switchphy3: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
interrupts = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pciem1_pins>;
|
||||
reset-gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_mkey>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ethernet {
|
||||
gmac1_rstn_l: gmac1-rstn-l {
|
||||
rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
gpio_8367_en: gpio-8367-en {
|
||||
rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
rtl8367rb_eint: rtl8367rb-eint {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
gpio0_a0_user: gpio0-a0-user {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
lan1_led_g: lan1-led-g {
|
||||
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
lan2_led_g: lan2-led-g {
|
||||
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
lan3_led_g: lan3-led-g {
|
||||
rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sys_led_g: sys-led-g {
|
||||
rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wan_led_g: wan-led-g {
|
||||
rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
mkey_pwr_en: mkey-pwr-en {
|
||||
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc {
|
||||
rtc_int_l: rtc-int-l {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
usb_host_en: usb-host-en {
|
||||
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc1v8_emmc>;
|
||||
status = "fail";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -0,0 +1,985 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Mekotronics R58 4x4";
|
||||
compatible = "mekotronics,r58-4x4", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc; // SD card
|
||||
mmc1 = &sdhci; // eMMC
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
power_led: power-led {
|
||||
label = "power";
|
||||
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&power_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>; //USB_HOST_PWREN_H_GPIO2_A6
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vdd_3v3_sd: regulator-vdd-3v3-sd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_3v3_sd";
|
||||
gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vdd_sd_en>;
|
||||
// vendor: startup-delay-us = <100000>;
|
||||
};
|
||||
|
||||
pcie30_avdd0v75: pcie30-avdd0v75 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd0v75";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
vin-supply = <&vdd_0v75_s0>;
|
||||
};
|
||||
|
||||
pcie30_avdd1v8: pcie30-avdd1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pcie30_avdd1v8";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&avcc_1v8_s0>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie30_en>;
|
||||
gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; //PCIE30x4_PWREN_H
|
||||
startup-delay-us = <10000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie2x1l1: vcc3v3-pcie2x1l1{
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie2x1l1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
startup-delay-us = <10000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_wlan: regulator-vcc3v3-wlan {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wlan-en";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_pwren>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_receiver_cma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// labeled as "HDMI IN60" - left side of board to the rear
|
||||
&hdmi_receiver {
|
||||
hpd-gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&hdmim2_rx_cec &hdmim2_rx_hpdin &hdmim2_rx_scl &hdmim2_rx_sda &hdmirx_hpd>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; //RTCIC_INT_L_GPIO0_B2
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
//hdmi0 sound
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy0_ps {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
//m.2
|
||||
&pcie3x4 {
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// wifi BCM43752 [14e4:449d]
|
||||
&pcie2x1l0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_wlan>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x200000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
device_type = "pci";
|
||||
bus-range = <0x20 0x2f>;
|
||||
|
||||
wifi: wifi@0,0 {
|
||||
compatible = "pci14e4,449d";
|
||||
reg = <0x210000 0 0 0 0>;
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&combphy1_ps { // for &pcie2x1l0 (wifi)
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// RTL8125B(S)_BG(S)_BI [10ec:8125]
|
||||
&pcie2x1l1 {
|
||||
reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie2x1l1>;
|
||||
status = "okay";
|
||||
|
||||
pcie@0,0 {
|
||||
reg = <0x00300000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
|
||||
rtl8125_0: ethernet@31,0 {
|
||||
compatible = "pci10ec,8125";
|
||||
reg = <0x31000000 0 0 0 0>;
|
||||
|
||||
mac-address = [ea 72 73 83 a4 f5]; // @TODO: to be patched by U-Boot
|
||||
local-mac-address = [ea 72 73 83 a4 f5]; // @TODO: to be patched by U-Boot
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&combphy2_psu { // for &pcie2x1l1 (rtl8125b)
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&pinctrl {
|
||||
gpio-leds {
|
||||
power_led_pin: power-led-pin {
|
||||
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_sd {
|
||||
vdd_sd_en: vdd-sd-en {
|
||||
rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; // from vendor
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
vcc3v3_pcie30_en: vcc3v3-pcie30-en {
|
||||
rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
RTL8125B {
|
||||
RTL8125B_isolate: RTL8125B-isolate {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmirx {
|
||||
hdmirx_hpd: hdmirx-5v-detection {
|
||||
rockchip,pins = <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wlan {
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
wifi_pwren: wifi-pwren {
|
||||
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
bt_reset_pin: bt-reset-pin {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_pin: bt-wake-pin {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_host_irq: bt-wake-host-irq {
|
||||
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>; // vendor
|
||||
// hs400 causes immediate trouble, hs200 works at around 150mb/s
|
||||
// mmc-hs400-1_8v;
|
||||
// mmc-hs400-enhanced-strobe;
|
||||
mmc-hs200-1_8v;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
no-mmc;
|
||||
no-sdio;
|
||||
max-frequency = <150000000>; // vendor
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vdd_3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default", "pmic-power-off";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
pinctrl-1 = <&rk806_dvs1_slp>, <&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
spi-max-frequency = <1000000>;
|
||||
system-power-controller;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs1_slp: dvs1-slp-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun1";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-ramp-delay = <12500>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
// @TODO: vendor: regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// pins on the back of the board (green connector)
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m0_xfer>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// bluetooth via the BCM43752
|
||||
&uart6 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart6m1_xfer &uart6m1_ctsn &uart6m1_rtsn>;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
interrupt-parent = <&gpio1>; // bt_wake_host_irq
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>; // bt_wake_host_irq
|
||||
interrupt-names = "host-wakeup";
|
||||
device-wakeup-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; // bt_wake_pin
|
||||
shutdown-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; // bt_reset_pin
|
||||
max-speed = <1500000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_wake_host_irq &bt_wake_pin &bt_reset_pin>;
|
||||
vbat-supply = <&vcc_3v3_s3>;
|
||||
vddio-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg { // for fc000000.usb UDC
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci { // usb@fc000000
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&u2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// XHCI (USB3) stuff is disabled, as it all depends on the fusb302 USB-C controller
|
||||
// the blue ports on the front of the board, labelled "USB3", arent really USB3, but USB2.
|
||||
&u2phy1 { // for usbdp_phy1 which is also usb_host1_xhci
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&u2phy1_otg { // for usb_host1_xhci
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
// USB 2.0 stuff that somewhat works:
|
||||
&u2phy2 { // for usb_host0_ohci and usb_host0_ehci
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy2_host { // for usb_host0_ohci and usb_host0_ehci
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3 { // for usb_host1_ehci and usb_host1_ohci
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy3_host { // for usb_host1_ehci and usb_host1_ohci
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&pd_npu {
|
||||
domain-supply = <&vdd_npu_s0>;
|
||||
};
|
||||
|
||||
&rknn_core_0 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_1 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_2 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -0,0 +1,937 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2024 Joshua Riek <jjriek@verizon.net>
|
||||
*/
|
||||
|
||||
// From https://github.com/Joshua-Riek/linux/blob/v6.7-rk3588/arch/arm64/boot/dts/rockchip/rk3588-mixtile-core3588e.dts
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3588.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Mixtile Core 3588E";
|
||||
compatible = "mixtile,core3588e", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
cooling-levels = <0 40 51 77 102 128 153 179 204 230 255>;
|
||||
fan-supply = <&vcc5v0_sys>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB4 IRQ_TYPE_EDGE_FALLING>;
|
||||
pwms = <&pwm2 0 50000 0>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_led: led-0 {
|
||||
label = "sys_led";
|
||||
gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sys_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie30";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
enable-active-high;
|
||||
gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie30_en>;
|
||||
startup-delay-us = <5000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
hdmi0-con {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con_in: endpoint {
|
||||
remote-endpoint = <&hdmi0_out_con>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
mem-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
mem-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
mem-supply = <&vdd_cpu_lit_mem_s0>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
pinctrl-names = "default";
|
||||
rx_delay = <0x00>;
|
||||
tx_delay = <0x43>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi0_in {
|
||||
hdmi0_in_vp0: endpoint {
|
||||
remote-endpoint = <&vp0_out_hdmi0>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_out {
|
||||
hdmi0_out_con: endpoint {
|
||||
remote-endpoint = <&hdmi0_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi0_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdptxphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1m2_xfer>;
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/* maybe on some pin connector? found on vendor kernel */
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c3m0_xfer>;
|
||||
};
|
||||
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&i2c4m3_xfer>;
|
||||
|
||||
hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "hym8563";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
/* on 40-pin connector pins: pin 3 is SDA; pin 5 is SCL */
|
||||
&i2c5 {
|
||||
pinctrl-0 = <&i2c5m2_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// hdmi-0 audio
|
||||
&i2s5_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy: ethernet-phy@1 {
|
||||
/* RTL8211F */
|
||||
compatible = "ethernet-phy-id001c.c916",
|
||||
"ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtl8211f_rst>;
|
||||
reset-assert-us = <15000>;
|
||||
reset-deassert-us = <50000>;
|
||||
reset-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Temperature sensor near the center of the SoC */
|
||||
&package_thermal {
|
||||
polling-delay = <1000>;
|
||||
|
||||
trips {
|
||||
trip0: trip0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <45000>; /* 45 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip1: trip1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <52000>; /* 52 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip2: trip2 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <54000>; /* 54 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip3: trip3 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <56000>; /* 56 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip4: trip4 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <58000>; /* 58 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip5: trip5 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <60000>; /* 60 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip6: trip6 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <62000>; /* 62 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip7: trip7 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <64000>; /* 64 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip8: trip8 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <66000>; /* 66 celsius */
|
||||
type = "active";
|
||||
};
|
||||
trip9: trip9 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <70000>; /* 70 celsius */
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip0>;
|
||||
};
|
||||
map1 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip1>;
|
||||
};
|
||||
map2 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip2>;
|
||||
};
|
||||
map3 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip3>;
|
||||
};
|
||||
map4 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip4>;
|
||||
};
|
||||
map5 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip5>;
|
||||
};
|
||||
map6 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip6>;
|
||||
};
|
||||
map7 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip7>;
|
||||
};
|
||||
map8 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip8>;
|
||||
};
|
||||
map9 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
trip = <&trip9>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie2x1l1 {
|
||||
linux,pci-domain = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie2_reset>;
|
||||
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x4 {
|
||||
linux,pci-domain = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie3_reset>, <&pcie3_clkreqn_m1>;
|
||||
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie30>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_gpu {
|
||||
domain-supply = <&vdd_gpu_s0>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
hym8563 {
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie2 {
|
||||
pcie2_reset: pcie2-reset {
|
||||
rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie3 {
|
||||
pcie3_reset: pcie3-reset {
|
||||
rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie3_clkreqn_m1: pcie3-clkreqn-m1 {
|
||||
rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie30_en: pcie3-reg {
|
||||
rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc {
|
||||
emmc_data_strobe: emmc-data-strobe {
|
||||
rockchip,pins = <2 RK_PA2 1 &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
rtl8211f {
|
||||
rtl8211f_rst: rtl8211f-rst {
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
sys_led_pin: sys-led-pin {
|
||||
rockchip,pins = <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
pinctrl-0 = <&pwm2m1_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vcc_1v8_s0>;
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_data_strobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// required for pcie2x1l1
|
||||
&combphy2_psu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg { // for fc000000.usb UDC
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 { // for usb_host1_xhci
|
||||
// usb hub on carrier board is brought up by vcc5v0_host always-on
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg { // for usb_host1_xhci, otherwise "rockchip-usb2phy fd5d4000.syscon:usb2phy@4000: Requested PHY is disabled"
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy1 { // for usb_host1_xhci
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci { // usb@fc000000
|
||||
dr_mode = "peripheral";
|
||||
maximum-speed = "high-speed";
|
||||
phys = <&u2phy0_otg>;
|
||||
phy-names = "usb2-phy";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci { // usb@fc400000 <-- this works on vendor (as usb8 -> usbdrd3_1/fc400000.usb), there's a hub on the carrier board
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
// 40-pin: pin 8 is UART TX; pin 10 is UART RX (unconfirmed)
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
|
||||
};
|
||||
|
||||
// found on vendor kernel, but no idea where it is physically
|
||||
&uart7 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m1_xfer &uart7m1_ctsn &uart7m1_rtsn>;
|
||||
};
|
||||
|
||||
// debug port, on the extra horizontal pins on the carrier board (NOT 40-pin)
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pd_npu {
|
||||
domain-supply = <&vdd_npu_s0>;
|
||||
};
|
||||
|
||||
&rknn_core_0 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_1 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_core_2 {
|
||||
npu-supply = <&vdd_npu_s0>;
|
||||
sram-supply = <&vdd_npu_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rknn_mmu_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vp0 {
|
||||
vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||||
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||||
remote-endpoint = <&hdmi0_in_vp0>;
|
||||
};
|
||||
};
|
||||
1164
patch/kernel/archive/rockchip64-6.19/dt/rk3588-youyeetoo-yy3588.dts
Normal file
1164
patch/kernel/archive/rockchip64-6.19/dt/rk3588-youyeetoo-yy3588.dts
Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user