Remove unused patch

patch/kernel/sunxi-next/20-sun4i-gpadc-iio-add-H3-bindings.patch

@@ -1,47 +0,0 @@
-diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
-index badff3611a98..986265c59b2a 100644
---- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
-+++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
-@@ -4,12 +4,21 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
- and sometimes as a touchscreen controller.
- 
- Required properties:
--  - compatible: "allwinner,sun8i-a33-ths",
-+  - compatible: must contain one of the following compatibles:
-+		- "allwinner,sun8i-a33-ths"
-+		- "allwinner,sun8i-h3-ths"
-   - reg: mmio address range of the chip,
-   - #thermal-sensor-cells: shall be 0,
-   - #io-channel-cells: shall be 0,
- 
--Example:
-+Required properties for the following compatibles:
-+		- "allwinner,sun8i-h3-ths"
-+  - clocks: the bus clock and the input clock of the ADC,
-+  - clock-names: should be "bus" and "mod",
-+  - resets: the bus reset of the ADC,
-+  - interrupts: the sampling interrupt of the ADC,
-+
-+Example for A33:
- 	ths: ths@01c25000 {
- 		compatible = "allwinner,sun8i-a33-ths";
- 		reg = <0x01c25000 0x100>;
-@@ -17,6 +26,18 @@ Example:
- 		#io-channel-cells = <0>;
- 	};
- 
-+Example for H3:
-+	ths: thermal-sensor@1c25000 {
-+		compatible = "allwinner,sun8i-h3-ths";
-+		reg = <0x01c25000 0x400>;
-+		clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
-+		clock-names = "bus", "mod";
-+		resets = <&ccu RST_BUS_THS>;
-+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-+		#thermal-sensor-cells = <0>;
-+		#io-channel-cells = <0>;
-+	};
-+
- sun4i, sun5i and sun6i SoCs are also supported via the older binding:
- 
- sun4i resistive touchscreen controller