Adopt vendor Sunvell R69 fex for Armbian

config/fex/sunvell-r69.fex

@@ -1,11 +1,13 @@
 [product]
 version = "100"
-machine = "dolphin_p2"
+machine = "Sunvell R69"
 
 [platform]
 debug_mode = 1
 eraseflag = 1
 next_work = 3
+secure_without_OS = 1
+secure_bit = 0
 
 [target]
 boot_clock = 1008
@@ -92,7 +94,7 @@ force_uart_tx = port:PF02<3><1><default><default>
 force_uart_rx = port:PF04<3><1><default><default>
 
 [jtag_para]
-jtag_enable = 1
+jtag_enable = 0
 jtag_ms = port:PA00<3><default><default><default>
 jtag_ck = port:PA01<3><default><default><default>
 jtag_do = port:PA02<3><default><default><default>
@@ -142,7 +144,7 @@ wakeup_src0 =
 wakeup_src_bt = port:PL06<6><default><default><0>
 
 [twi0]
-twi_used = 1
+twi_used = 0
 twi_scl = port:PA11<2><default><default><default>
 twi_sda = port:PA12<2><default><default><default>
 
@@ -164,7 +166,7 @@ uart_tx = port:PA04<2><1><default><default>
 uart_rx = port:PA05<2><1><default><default>
 
 [uart1]
-uart_used = 1
+uart_used = 0
 uart_port = 1
 uart_type = 4
 uart_tx = port:PG06<2><1><default><default>
@@ -217,53 +219,58 @@ chip_select = 0
 mode = 0
 
 [gpio_para]
-gpio_used = 1
-gpio_num = 2
-gpio_pin_1 = port:PL10<1><default><default><0>
-gpio_pin_2 = port:PA15<1><default><default><1>
+gpio_used = 0
+gpio_num = 0
 
-[led_assign]
-normal_led = "gpio_pin_2"
-standby_led = "gpio_pin_1"
+[leds_para]
+leds_used = 1
+green_led = port:PL10<1><default><default><1>
+green_led_active_low = 0
+red_led = port:PA15<1><default><default><0>
+red_led_active_low = 0
 
 [ths_para]
 ths_used = 1
-ths_trip1_count = 7
-ths_trip1_0 = 80
-ths_trip1_1 = 85
-ths_trip1_2 = 90
-ths_trip1_3 = 95
-ths_trip1_4 = 100
-ths_trip1_5 = 105
-ths_trip1_6 = 115
-ths_trip1_4 = 0
-ths_trip1_5 = 0
-ths_trip1_6 = 0
-ths_trip1_7 = 0
+ths_trip1_count = 8
+ths_trip1_0 = 65
+ths_trip1_1 = 70
+ths_trip1_2 = 75
+ths_trip1_3 = 80
+ths_trip1_4 = 85
+ths_trip1_5 = 90
+ths_trip1_6 = 95
+ths_trip1_7 = 100
 ths_trip1_0_min = 0
-ths_trip1_0_max = 0
+ths_trip1_0_max = 1
 ths_trip1_1_min = 1
-ths_trip1_1_max = 1
-ths_trip1_2_min = 1
-ths_trip1_2_max = 1
-ths_trip1_3_min = 2
-ths_trip1_3_max = 2
-ths_trip1_4_min = 2
-ths_trip1_4_max = 2
-ths_trip1_5_min = 3
-ths_trip1_5_max = 4
-ths_trip1_6_min = 4
-ths_trip1_6_max = 4
+ths_trip1_1_max = 2
+ths_trip1_2_min = 2
+ths_trip1_2_max = 3
+ths_trip1_3_min = 3
+ths_trip1_3_max = 4
+ths_trip1_4_min = 4
+ths_trip1_4_max = 5
+ths_trip1_5_min = 5
+ths_trip1_5_max = 6
+ths_trip1_6_min = 6
+ths_trip1_6_max = 7
 ths_trip2_count = 1
-ths_trip2_0 = 115
+ths_trip2_0 = 105
+
+;----------------------------------------------------------------------------------
+;cooler_table  cooler_count <=32
+;----------------------------------------------------------------------------------
 
 [cooler_table]
-cooler_count = 5
-cooler0 = "1200000 4 4294967295 0"
-cooler1 = "1200000 3 4294967295 0"
-cooler2 = "1200000 2 4294967295 0"
-cooler3 = "1200000 1 4294967295 0"
-cooler4 = "504000 1 4294967295 0"
+cooler_count = 8
+cooler0 = "1008000 4 4294967295 0"
+cooler1 = "912000 4 4294967295 0"
+cooler2 = "768000 4 4294967295 0"
+cooler3 = "648000 4 4294967295 0"
+cooler4 = "480000 4 4294967295 0"
+cooler5 = "480000 3 4294967295 0"
+cooler6 = "240000 2 4294967295 0"
+cooler7 = "240000 1 4294967295 0"
 
 [nand0_para]
 nand_support_2ch = 0
@@ -290,9 +297,9 @@ nand0_ndqs = port:PC16<2><0><1><default>
 [boot_disp]
 advert_disp = 0
 auto_hpd = 1
-output_type = 2
+output_type = 4
 hdmi_channel = 0
-hdmi_mode = 4
+hdmi_mode = 5
 cvbs_channel = 1
 cvbs_mode = 11
 output_full = 1
@@ -302,9 +309,9 @@ hdmi_mode_check = 1
 disp_init_enable = 1
 disp_mode = 0
 screen0_output_type = 3
-screen0_output_mode = 4
+screen0_output_mode = 5
 screen1_output_type = 3
-screen1_output_mode = 4
+screen1_output_mode = 5
 fb0_format = 0
 fb0_width = 1280
 fb0_height = 720
@@ -316,15 +323,18 @@ fb1_height = 0
 hdmi_used = 1
 hdmi_power = "vcc-hdmi-18"
 
+[hdmi_cec]
+hdmi_cec_used = 1
+hdmi_cec_pin = port:PA14<0><0><default><default>
+
 [tv_para]
-tv_used = 1
+tv_used = 0
 tv_dac_used = 1
 tv_dac_src0 = 0
 
 [pwm0_para]
 pwm_used = 0
 pwm_positive = port:PA05<3><0><default><default>
-:       If set gamc_phy to use = 2
 
 [gmac0]
 gmac_used = 2
@@ -402,16 +412,16 @@ vip_dev1_flash_mode =
 vip_dev1_af_pwdn =
 
 [tvout_para]
-tvout_used =
+tvout_used = 0
 tvout_channel_num =
-tv_en =
+tv_en = 0
 
 [tvin_para]
-tvin_used =
+tvin_used = 0
 tvin_channel_num =
 
 [di_para]
-di_used = 1
+di_used = 0
 
 [mmc0_para]
 sdc_used = 1
@@ -474,7 +484,7 @@ sdc_2xmode = 1
 sdc_ddrmode = 1
 
 [smc_para]
-smc_used =
+smc_used = 0
 smc_rst = port:PA09<2><default><default><default>
 smc_vppen = port:PA20<3><default><default><default>
 smc_vppp = port:PA21<3><default><default><default>
@@ -486,7 +496,7 @@ smc_sda = port:PA08<2><default><default><default>
 [usbc0]
 usb_used = 1
 usb_port_type = 1
-usb_detect_type = 1
+usb_detect_type = 0
 usb_id_gpio =
 usb_det_vbus_gpio =
 usb_drv_vbus_gpio = port:PL02<1><0><default><0>
@@ -570,7 +580,7 @@ wl_host_wake = port:PA11<0><default><default><0>
 wl_host_wake_invert = 0
 
 [bt_para]
-bt_used = 1
+bt_used = 0
 bt_uart_id = 1
 bt_uart_baud = 1500000
 bt_rst_n = port:PL01<1><default><default><0>
@@ -692,15 +702,15 @@ pmu_gpio0 = port:PL06<1><1><2><1>
 pmu_level0 = 11300
 pmu_level1 = 1100
 max_freq = 1008000000
-min_freq = 480000000
+min_freq = 240000000
 boot_freq = 1008000000
 LV_count = 8
 LV1_freq = 1200000000
 LV1_volt = 1300
 LV2_freq = 1008000000
 LV2_volt = 1200
-LV3_freq = 0
-LV3_volt = 1100
+LV3_freq = 240000000
+LV3_volt = 1200
 LV4_freq = 0
 LV4_volt = 1100
 LV5_freq = 0
@@ -759,7 +769,7 @@ s_power_reg = 0
 s_system_power = 50
 
 [sim0]
-scr_used = 1
+scr_used = 0
 scr_vccen = port:PA06<2><default><default><default>
 scr_slk = port:PA07<2><default><default><default>
 scr_sda = port:PA08<2><default><default><default>
@@ -800,3 +810,11 @@ din_gpio = port:PD00<1><default><default><1>
 clk_gpio = port:PD01<1><default><default><1>
 stb_gpio = port:PD02<1><default><default><1>
 
+[mali_para]
+mali_used = 1
+mali_clkdiv = 1
+mali_extreme_freq = 600
+mali_extreme_vol = 1400
+
+[corekeeper]
+corekeeper_enabled = 1