Try to fix OPi Zero Wi-Fi and red led

Partially based on vendor fex: http://pastebin.com/480BYtj3

config/fex/orangepizero.fex

@@ -1,6 +1,6 @@
 [product]
 version = "100"
-machine = "orangepi-one"
+machine = "orangepi-zero"
 
 [platform]
 debug_mode = 1
@@ -22,7 +22,7 @@ fel_key_min = 2
 logical_start = 40960
 sprite_work_delay = 500
 sprite_err_delay = 200
-sprite_gpio0 = port:PA15<1><default><default><default>
+sprite_gpio0 = port:PA17<1><default><default><default>
 next_work = 3
 
 [box_start_os]
@@ -37,7 +37,7 @@ led_state = 0
 [boot_init_gpio]
 used = 1
 gpio0 = port:PL10<1><default><default><1>
-gpio1 = port:PG11<1><default><default><1>
+gpio1 = port:PA17<1><default><default><1>
 
 [recovery_para]
 used = 1
@@ -222,8 +222,8 @@ gpio_pin_2 = port:PA10<1><default><default><0>
 leds_used = 1
 green_led = port:PL10<1><default><default><1>
 green_led_active_low = 0
-blue_led = port:PA10<1><default><default><0>
-blue_led_active_low = 0
+red_led = port:PA17<1><default><default><0>
+red_led_active_low = 0
 
 [ths_para]
 ths_used = 1
@@ -306,7 +306,7 @@ output_full = 1
 hdmi_mode_check = 1
 
 [disp_init]
-disp_init_enable = 0
+disp_init_enable = 1
 disp_mode = 1
 screen0_output_type = 2
 screen0_output_mode = 11
@@ -412,8 +412,8 @@ vip_dev1_flash_mode =
 vip_dev1_af_pwdn =
 
 [tvout_para]
-tvout_used =
-tvout_channel_num =
+tvout_used = 1
+tvout_channel_num = 1
 tv_en =
 
 [tvin_para]
@@ -547,8 +547,7 @@ luns = 3
 serial_unique = 0
 
 [module_para]
-module_num = 7
-module_power0 = "vcc-wifi-33"
+module_power0 = port:PA20<1><default><default><0>
 module_power0_vol = 0
 module_power1 =
 module_power1_vol =
@@ -557,7 +556,7 @@ module_power2_vol =
 module_power3 =
 module_power3_vol =
 chip_en =
-lpo_use_apclk =
+lpo_use_apclk = "losc_out"
 
 [wifi_para]
 wifi_used = 1