diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 92981d8..1dbe50c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64-android.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64-android-avb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-z28pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-fpga.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-sheep.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts b/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts new file mode 100644 index 0000000..7b82b78 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts @@ -0,0 +1,779 @@ +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3328.dtsi" +#include + +/ { + model = "Z28pro"; + compatible = "rockchip,rk3328-z28pro", "rockchip,rk3328"; + + chosen { + bootargs = "earlyprintk=uart8250-32bit,0xff130000"; + }; + + leds { + compatible = "gpio-leds"; + + standby-led { + linux,default-trigger = "heartbeat"; + gpios = <&rk805 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + power-led { + linux,default-trigger = "mmc0"; + gpios = <&rk805 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + }; + + gmac_clkin: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_clkin"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,name = "rockchip,rk3328"; + simple-audio-card,cpu { + sound-dai = <&i2s1>; + }; + simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <128>; + simple-audio-card,name = "rockchip,hdmi"; + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; + + spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rockchip,spdif"; + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_host_5v: vcc-host-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb30_host_drv>; + regulator-name = "vcc_host_5v"; + vin-supply = <&vcc_sys>; + }; + + vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb20_host_drv>; + regulator-name = "vcc_host1_5v"; + vin-supply = <&vcc_sys>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + #clock-cells = <0>; + }; + + + vcc_sd: sdmmc-ext-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0m0_gpio>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + status = "okay"; + }; + + wireless-bluetooth { + compatible = "bluetooth-platdata"; + uart_rts_gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "rts_gpio"; + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-1; + BT,wake_gpio; + BT,power_gpio = <&gpio1 0x18 GPIO_ACTIVE_HIGH>; + BT,wake_host_irq = <&gpio1 0x1a GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + wireless-wlan { + compatible = "wlan-platdata"; + rockchip,grf = <&grf>; + wifi_chip_type = "rtl8822bs"; + WIFI,host_wake_irq = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>; + /*WIFI,poweren_gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;*/ + status = "okay"; + sdio_vref = <1800>; + }; +}; + +&codec { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dfi { + status = "okay"; +}; + +&dmc { + center-supply = <&vdd_logic>; + status = "okay"; +}; + +&emmc { + /delete-property/ clock-freq-min-max; + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + supports-emmc; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + disable-wp; + max-frequency = <200000000>; + mmc-hs200-1_8v; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_18emmc>; + status = "okay"; +}; + + +&gmac2io { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio2 0x11 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; + assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_pins>; + tx_delay = <0x26>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_logic>; +}; + +&hdmi { + #sound-dai-cells = <0>; + ddc-i2c-scl-high-time-ns = <9625>; + ddc-i2c-scl-low-time-ns = <10000>; + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rk805: rk805@18 { + compatible = "rockchip,rk805"; + status = "okay"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + gpio-controller; + #gpio-cells = <2>; + #clock-cells = <1>; + clock-output-names = "rk805-clkout1", "rk805-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_sys>; + + + rtc { + status = "okay"; + }; + + pwrkey { + status = "okay"; + }; + + gpio { + status = "okay"; + }; + + regulators { + compatible = "rk805-regulator"; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_logic: RK805_DCDC1 { + regulator-compatible = "RK805_DCDC1"; + regulator-name = "vdd_logic"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <0x1>; + regulator-ramp-delay = <12500>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vdd_arm: RK805_DCDC2 { + regulator-compatible = "RK805_DCDC2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = <0x1>; + regulator-ramp-delay = <12500>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: RK805_DCDC3 { + regulator-compatible = "RK805_DCDC3"; + regulator-name = "vcc_ddr"; + regulator-initial-mode = <0x1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + }; + }; + + vcc_io: RK805_DCDC4 { + regulator-compatible = "RK805_DCDC4"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x1>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-mode = <0x2>; + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_18: RK805_LDO1 { + regulator-compatible = "RK805_LDO1"; + regulator-name = "vdd_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_18emmc: RK805_LDO2 { + regulator-compatible = "RK805_LDO2"; + regulator-name = "vcc_18emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_11: RK805_LDO3 { + regulator-compatible = "RK805_LDO3"; + regulator-name = "vdd_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + }; + }; +}; + +&h265e { + status = "okay"; +}; + +&i2s0 { + #sound-dai-cells = <0>; + rockchip,bclk-fs = <128>; + status = "okay"; +}; + +&i2s1 { + #sound-dai-cells = <0>; + status = "okay"; +}; + + +&io_domains { + status = "okay"; + + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_18emmc>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vdd_18>; + vccio5-supply = <&vcc_io>; + vccio6-supply = <&vcc_io>; + pmuio-supply = <&vcc_io>; +}; + +&pinctrl { + + pinctrl-names = "default"; + pinctrl-0 = <&clk_32k_out>; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */ + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + clk_32k { + clk_32k_out: clk-32k-out { + rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + usb2 { + usb20_host_drv: usb20-host-drv { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb3 { + usb30_host_drv: usb30-host-drv { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir { + ir_int: ir-int { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rga { + status = "okay"; +}; + + +&pwm3 { + status = "okay"; + compatible = "rockchip,remotectl-pwm"; + remote_pwm_id = <3>; + handle_cpu_id = <1>; + remote_support_psci = <1>; + + ir_key1 { + rockchip,usercode = <0x4040>; + rockchip,key_table = + <0xf2 KEY_REPLY>, + <0xba KEY_BACK>, + <0xf4 KEY_UP>, + <0xf1 KEY_DOWN>, + <0xef KEY_LEFT>, + <0xee KEY_RIGHT>, + <0xbd KEY_HOME>, + <0xea KEY_VOLUMEUP>, + <0xe3 KEY_VOLUMEDOWN>, + <0xe2 KEY_SEARCH>, + <0xb2 KEY_POWER>, + <0xbc KEY_MUTE>, + <0xec KEY_MENU>, + <0xbf 0x190>, + <0xe0 0x191>, + <0xe1 0x192>, + <0xe9 183>, + <0xe6 248>, + <0xe8 185>, + <0xe7 186>, + <0xf0 388>, + <0xbe 0x175>; + }; + + ir_key2 { + rockchip,usercode = <0xff00>; + rockchip,key_table = + <0x39 KEY_POWER>, + <0x73 KEY_MUTE>, + <0xa4 KEY_PLAYPAUSE>, + <0x75 KEY_VOLUMEDOWN>, + <0x77 KEY_VOLUMEUP>, + <0x7d KEY_MENU>, + <0xf9 KEY_HOME>, + <0x5f KEY_BACK>, + <0xb9 KEY_UP>, + <0xe9 KEY_DOWN>, + <0xb8 KEY_LEFT>, + <0xea KEY_RIGHT>, + <0xaa KEY_REPLY>, + <0x55 KEY_1>, + <0x5b KEY_2>, + <0xf8 KEY_3>, + <0x57 KEY_4>, + <0xed KEY_5>, + <0xee KEY_6>, + <0x59 KEY_7>, + <0xf1 KEY_8>, + <0xf2 KEY_9>, + <0xe0 KEY_BACKSPACE>, + <0x79 KEY_0>, + <0xa4 KEY_SETUP>; + }; + + ir_key3 { + rockchip,usercode = <0x1dcc>; + rockchip,key_table = + <0xee KEY_REPLY>, + <0xf0 KEY_BACK>, + <0xf8 KEY_UP>, + <0xbb KEY_DOWN>, + <0xef KEY_LEFT>, + <0xed KEY_RIGHT>, + <0xfc KEY_HOME>, + <0xf1 KEY_VOLUMEUP>, + <0xfd KEY_VOLUMEDOWN>, + <0xb7 KEY_SEARCH>, + <0xff KEY_POWER>, + <0xf3 KEY_MUTE>, + <0xbf KEY_MENU>, + <0xf9 0x191>, + <0xf5 0x192>, + <0xb3 388>, + <0xbe KEY_1>, + <0xba KEY_2>, + <0xb2 KEY_3>, + <0xbd KEY_4>, + <0xf9 KEY_5>, + <0xb1 KEY_6>, + <0xfc KEY_7>, + <0xf8 KEY_8>, + <0xb0 KEY_9>, + <0xb6 KEY_0>, + <0xb5 KEY_BACKSPACE>; + }; +}; + +&rkvdec { + status = "okay"; +}; + +&rkvdec_mmu { + status = "okay"; +}; + +&sdmmc { + /delete-property/ clock-freq-min-max; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + ignore-pm-notify; + keep-power-in-suspend; + power-inverted; + supports-UHS_SDR104; + supports-sdio; + cap-sdio-irq; + non-removable; + bus-width = <4>; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_cmd &sdmmc0_clk>; + /*vmmc-supply = <&vcc_sdio>; + vqmmc-supply = <&vdd_18>;*/ + status = "okay"; +}; + + + +&sdmmc_ext { + /delete-property/ clock-freq-min-max; + reg = <0x0 0xff5f0000 0x0 0x4000>; + clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = ; + status = "okay"; + cd-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + bus-width = <0x4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + num-slots = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_dectn &sdmmc0ext_bus4>; + supports-sd; + card-detect-delay = <0x320>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vcc_sd>; + ignore-pm-notify; + keep-power-in-suspend; + power-inverted; + }; + +&spdif { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spdifm0_tx>; + status = "okay"; +}; + +&threshold { + temperature = <90000>; /* millicelsius */ +}; + +&target { + temperature = <105000>; /* millicelsius */ +}; + +&soc_crit { + temperature = <110000>; /* millicelsius */ +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + rockchip,hw-tshut-temp = <120000>; + status = "okay"; +}; + + +&uart2 { + status = "okay"; + dma-names = "tx", "rx"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + phy-supply = <&vcc_host1_5v>; + status = "okay"; +}; + +&u2phy_otg { + phy-supply = <&vcc_otg_5v>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&u3phy_utmi { + phy-supply = <&vcc_host_5v>; + status = "okay"; +}; + +&u3phy_pipe { + phy-supply = <&vcc_host_5v>; + status = "okay"; +}; + +&usb20_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usbdrd3 { + status = "okay"; +}; + +&usbdrd_dwc3 { + status = "okay"; +}; + +&vepu { + status = "okay"; +}; + +&vepu_mmu { + status = "okay"; +}; + +&venc_srv { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vpu_service { + status = "okay"; +};