diff --git a/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts b/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
index 209a3996d1..803a0fd14d 100644
--- a/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
+++ b/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
@@ -104,6 +104,8 @@
 	vcc5v0_otg: vcc5v0-otg-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_otg";
+		regulator-boot-on;
+		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
@@ -401,57 +403,6 @@
 &i2c6 {
 	status = "okay";
 
-	usbc0: usb-typec@22 {
-		compatible = "fcs,fusb302";
-		reg = <0x22>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usbc0_int>;
-		vbus-supply = <&vcc5v0_otg>;
-		status = "okay";
-
-		connector {
-			compatible = "usb-c-connector";
-			data-role = "dual";
-			label = "USB-C";
-			op-sink-microwatt = <1000000>;
-			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
-			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
-			power-role = "dual";
-			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
-			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
-			try-power-role = "source";
-			typec-power-opmode = "1.5A";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-					usbc0_hs: endpoint {
-						remote-endpoint = <&usb_host0_xhci_drd_sw>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-					usbc0_ss: endpoint {
-						remote-endpoint = <&usbdp_phy0_typec_ss>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-					usbc0_sbu: endpoint {
-						remote-endpoint = <&usbdp_phy0_typec_sbu>;
-					};
-				};
-			};
-		};
-	};
-
 	hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
@@ -621,7 +572,7 @@
 	};
 
 	usb-typec {
-		usbc0_int: usbc0-int {
+		usbc0_int: usbc0-int { // @TODO missing fusb302
 			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
@@ -1031,29 +982,6 @@
 	};
 };
 
-&usbdp_phy0 {
-	mode-switch;
-	orientation-switch;
-	sbu1-dc-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
-	sbu2-dc-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbdp_phy0_typec_ss: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&usbc0_ss>;
-		};
-
-		usbdp_phy0_typec_sbu: endpoint@1 {
-			reg = <1>;
-			remote-endpoint = <&usbc0_sbu>;
-		};
-	};
-};
-
 &usbdp_phy1 {
 	rockchip,dp-lane-mux = <0 1 2 3>;
 	status = "okay";
@@ -1072,15 +1000,7 @@
 	maximum-speed = "high-speed";
 	phys = <&u2phy0_otg>;
 	phy-names = "usb2-phy";
-
-	usb-role-switch;
 	status = "okay";
-
-	port {
-		usb_host0_xhci_drd_sw: endpoint {
-			remote-endpoint = <&usbc0_hs>;
-		};
-	};
 };
 
 &u2phy1 { // for usbdp_phy1 which is also usb_host1_xhci