From d51cce6ceb9dd93f8e6ea2d671fec380329cbdab Mon Sep 17 00:00:00 2001
From: Karabek <github@karabek.net>
Date: Sun, 3 Jun 2018 15:56:29 +0200
Subject: [PATCH] H3 NanoPi Neo Air: updated wifi patch

updated patch enabling wifi for 4.17 changing model identifier, wifi powerup sequence, and wifi module control
---
 .../unresolved/wifi-nanopi-neo-air.patch      | 86 -------------------
 1 file changed, 86 deletions(-)
 delete mode 100644 patch/kernel/sunxi-dev/unresolved/wifi-nanopi-neo-air.patch

diff --git a/patch/kernel/sunxi-dev/unresolved/wifi-nanopi-neo-air.patch b/patch/kernel/sunxi-dev/unresolved/wifi-nanopi-neo-air.patch
deleted file mode 100644
index e29e637e1f..0000000000
--- a/patch/kernel/sunxi-dev/unresolved/wifi-nanopi-neo-air.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-old mode 100644
-new mode 100755
-index 03ff6f8..ddbb92b
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -47,7 +47,7 @@
- #include <dt-bindings/gpio/gpio.h>
- 
- / {
--	model = "FriendlyARM NanoPi NEO Air";
-+	model = "FriendlyElec NanoPi NEO Air";
- 	compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
- 
- 	aliases {
-@@ -58,6 +58,13 @@
- 		stdout-path = "serial0:115200n8";
- 	};
- 
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_en_neoair>;
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
-@@ -86,6 +86,13 @@
- 	};
- };
- 
-+&r_pio {
-+	wifi_en_neoair: wifi_en_pin@0 {
-+		allwinner,pins = "PL7";
-+		allwinner,function = "gpio_out";
-+	};
-+};
-+
- &mmc0 {
- 	vmmc-supply = <&reg_vcc3v3>;
- 	bus-width = <4>;
-@@ -84,6 +99,42 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: bcrmf@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+    pinctrl-names = "default";
-+    pinctrl-0 = <&mmc2_8bit_pins>;
-+    vmmc-supply = <&reg_vcc3v3>;
-+    bus-width = <8>;
-+    non-removable;
-+    cap-mmc-hw-reset;
-+    status = "okay";
-+};
-+
-+&mmc2_8bit_pins {
-+    /* Increase drive strength for DDR modes */
-+    drive-strength = <40>;
-+    /* eMMC is missing pull-ups */
-+    bias-pull-up;
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_a>;