diff --git a/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts b/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
index 92f9ad23f5..f7f770c4a0 100644
--- a/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
+++ b/patch/kernel/archive/rockchip64-6.19/dt/rk3588-blueberry-edge-v12-linux.dts
@@ -143,20 +143,6 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
-	/* @TODO: otg pin is different...
-	vcc5v0_otg: vcc5v0-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio4 0x07 0x00>;
-		pinctrl-0 = <&vcc5v0_otg_en>;
-		pinctrl-names = "default";
-		regulator-max-microvolt = <0x4c4b40>;
-		regulator-min-microvolt = <0x4c4b40>;
-		regulator-name = "vcc5v0_otg";
-		vin-supply = <&vcc5v0_sys>;
-	};
-	*/
-
 	hdmi0-con {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -390,10 +376,6 @@
 
 // @TODO: i2s6_8ch ?
 
-&combphy0_ps {
-	status = "okay";
-};
-
 &mdio0 {
 	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -444,7 +426,7 @@
 	};
 };
 
-&combphy0_ps { // @TODO for SATA?
+&combphy0_ps {
 	status = "okay";
 };
 
@@ -452,7 +434,7 @@
 	status = "okay";
 };
 
-&combphy2_psu { // @TODO: needed?
+&combphy2_psu {
 	status = "okay";
 };
 
@@ -468,9 +450,6 @@
 
 &pinctrl {
 
-	// @TODO: gmac0
-	// @TODO: gmac1
-
 	gpio-leds {
 		fourg_led_pin: fourg-led-pin {
 			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -491,12 +470,6 @@
 		};
 	};
 
-/* @TODO
-			pcie30x2m1_pins: pcie30x2m1-pins {
-				rockchip,pins = <0x04 0x06 0x04 &pcfg_pull_none>, <0x04 0x08 0x04 &pcfg_pull_none>, <0x04 0x07 0x04 &pcfg_pull_none>;
-			};
-*/
-
 	hdmirx {
 		hdmirx_hpd: hdmirx-5v-detection {
 			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -758,7 +731,6 @@
 
 				regulator-state-mem {
 					regulator-off-in-suspend;
-					// @TODO: vendor: regulator-suspend-microvolt = <1800000>;
 				};
 			};
 
@@ -950,8 +922,6 @@
 	status = "okay";
 };
 
-// @TODO whatever the frak usbhost3_0 is
-
 // XHCI (USB3) stuff is disabled, as it all depends on the fusb302 USB-C controller
 // the blue ports on the front of the board, labelled "USB3", arent really USB3, but USB2.
 &u2phy1 { // for usbdp_phy1 which is also usb_host1_xhci