diff --git a/patch/kernel/archive/meson64-6.4/board-odroidn2-add-dumb-gpio-fan.patch b/patch/kernel/archive/meson64-6.4/board-odroidn2-add-dumb-gpio-fan.patch
deleted file mode 100644
index 2ced92db0e..0000000000
--- a/patch/kernel/archive/meson64-6.4/board-odroidn2-add-dumb-gpio-fan.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 11:38:54 +0100
-Subject: arm64: dts: meson: g12b: add GPIO fan support
-
-Add simple GPIO fan node to support a fan on GPIO J8. Unfortunately the
-pad used to control the fan does not support real PWM, hence the RPM
-cannot be modulated.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
-Tested-by: Ricardo Pardini <ricardo@pardini.net>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index 667d2b774924..e896bac3c5c1 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -47,6 +47,15 @@ fan: gpio-fan {
- 		#cooling-cells = <2>;
- 	};
- 
-+	/* 5V 80x80x10.8mm cooling fan from Hardkernel shop... */
-+	fan0: gpio-fan {
-+		#cooling-cells = <2>;
-+		compatible = "gpio-fan";
-+		gpio-fan,speed-map = <0 0 1600 1>;
-+		gpios = <&gpio_ao GPIOAO_10 GPIO_ACTIVE_HIGH>;
-+		status = "okay";
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 
--- 
-Armbian
-
diff --git a/patch/kernel/archive/meson64-6.4/board-odroidn2-add-gpio-fan-as-cooling-device.patch b/patch/kernel/archive/meson64-6.4/board-odroidn2-add-gpio-fan-as-cooling-device.patch
deleted file mode 100644
index 6bbddbec72..0000000000
--- a/patch/kernel/archive/meson64-6.4/board-odroidn2-add-gpio-fan-as-cooling-device.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Stefan Agner <stefan@agner.ch>
-Date: Mon, 11 Jan 2021 15:53:55 +0100
-Subject: arm64: dts: meson: g12b: odroid-n2: add fan as cooling device
-
-Add the GPIO fan as a cooling device for the CPU thermal zone. Since we
-have only full fan speed available with this, set the tripping point to
-30 degrees Celsius.
-
-Signed-off-by: Stefan Agner <stefan@agner.ch>
----
- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 38 ++++++++++
- 1 file changed, 38 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-index e896bac3c5c1..2db95373261c 100644
---- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
-@@ -385,6 +385,44 @@ &clkc_audio {
- 	status = "okay";
- };
- 
-+&cpu_thermal {
-+	trips {
-+		cpu_warm: cpu_warm {
-+			hysteresis = <5000>;
-+			temperature = <30000>;
-+			type = "active";
-+		};
-+	};
-+
-+	cooling-maps {
-+		map0 {
-+			cooling-device =
-+				<&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+			trip = <&cpu_warm>;
-+		};
-+		map1 {
-+			trip = <&cpu_passive>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+		map2 {
-+			trip = <&cpu_hot>;
-+			cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+					 <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+		};
-+	};
-+};
-+
- &cpu0 {
- 	cpu-supply = <&vddcpu_b>;
- 	operating-points-v2 = <&cpu_opp_table_0>;
--- 
-Armbian
-