diff --git a/patch/kernel/archive/rockchip64-6.13/board-odroidm1-add-nodes-for-i2c-pwm-uart-spi.patch b/patch/kernel/archive/rockchip64-6.13/board-odroidm1-add-nodes-for-i2c-pwm-uart-spi.patch
new file mode 100644
index 0000000000..7f412fa8cf
--- /dev/null
+++ b/patch/kernel/archive/rockchip64-6.13/board-odroidm1-add-nodes-for-i2c-pwm-uart-spi.patch
@@ -0,0 +1,57 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Ricardo Pardini <ricardo@pardini.net>
+Date: Thu, 9 Jan 2025 19:22:12 +0100
+Subject: rk3568-odroid-m1: add nodes for i2c/pwm/spi/uart overlays
+
+- we used to have a bare-dt for odroid-m1 that got removed as it landed upstream
+- but mainline doesn't have the nodes we use for the overlays
+- at least i2c3 (which is aliased to i2c0) and uart1 breaks without them
+---
+ arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts | 34 ++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+index 111111111111..222222222222 100644
+--- a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts
+@@ -739,3 +739,37 @@ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+ 		remote-endpoint = <&hdmi_in_vp0>;
+ 	};
+ };
++
++&i2c3 {
++	status = "disabled";
++	pinctrl-names = "default";
++	pinctrl-0 = <&i2c3m1_xfer>;
++};
++
++&pwm1 {
++	status = "disabled";
++	pinctrl-0 = <&pwm1m1_pins>;
++};
++
++&pwm2 {
++	status = "disabled";
++	pinctrl-0 = <&pwm2m1_pins>;
++};
++
++&spi0 {
++	status = "disabled";
++
++	pinctrl-0 = <&spi0m1_pins>;
++	pinctrl-1 = <&spi0m1_pins_hs>;
++	num_chipselect = <1>;
++
++	cs-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
++};
++
++&uart1 {
++	status = "disabled";
++	dma-names = "tx", "rx";
++	/* uart1 uart1-with-ctsrts */
++	pinctrl-0 = <&uart1m1_xfer>;
++	pinctrl-1 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>;
++};
+-- 
+Armbian
+