diff --git a/patch/kernel/archive/rockchip64-6.14/dt/rk3566-bigtreetech-cb2.dts b/patch/kernel/archive/rockchip64-6.14/dt/rk3566-bigtreetech-cb2.dts deleted file mode 100644 index e15756003a..0000000000 --- a/patch/kernel/archive/rockchip64-6.14/dt/rk3566-bigtreetech-cb2.dts +++ /dev/null @@ -1,1041 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Rockchip Electronics Co., Ltd. - * - */ -/dts-v1/; - -#include -#include -#include -#include -#include "rk3566.dtsi" - -/ { - model = "Rockchip RK3566 OPi 3B"; - compatible = "rockchip,rk3566-orangepi-3b", "rockchip,rk3566"; - - aliases { - ethernet0 = &gmac1; - mmc0 = &sdhci; - mmc1 = &sdmmc0; - }; - - chosen: chosen { - stdout-path = "serial2:1500000n8"; - }; - - fan: pwm-fan { - compatible = "pwm-fan"; - #cooling-cells = <2>; - pwms = <&pwm7 0 50000 0>; - cooling-levels = <0 50 100 150 200 255>; - rockchip,temp-trips = < - 50000 1 - 55000 2 - 60000 3 - 65000 4 - 70000 5 - >; - }; - - hdmi-con { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - - led@0 { - gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>; - label = "power_led"; - linux,default-trigger = "default-on"; - pinctrl-names = "default"; - pinctrl-0 =<&blue_led>; - }; - - led@1 { - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - label = "status_led"; - linux,default-trigger = "heartbeat"; - pinctrl-names = "default"; - pinctrl-0 =<&leds_gpio>; - }; - }; - - rk809-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Analog RK809"; - simple-audio-card,mclk-fs = <256>; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - - simple-audio-card,codec { - sound-dai = <&rk809>; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&rk809 1>; - clock-names = "ext_clock"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - post-power-on-delay-ms = <200>; - reset-gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_LOW>; - }; - - /* labeled +12v in schematic */ - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - /* labeled +5v in schematic */ - vcc_5v: vcc-5v-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_5v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; - }; - - vbus: vbus { - compatible = "regulator-fixed"; - regulator-name = "vbus"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - /* labeled +3.3v For PCIe only in schematic */ - vcc3v3_pcie: vcc3v3-pcie-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_pcie"; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_drv>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc12v_dcin>; - }; - - vcc3v3_sys: vcc3v3-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vbus>; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vbus>; - }; - - vcc5v0_usb: vcc5v0-usb { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_usb"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vbus>; - }; - - vcc_sd: vcc-sd { - compatible = "regulator-fixed"; - regulator-max-microvolt = <3300000>; - regulator-min-microvolt = <3300000>; - regulator-name = "vcc_sd"; - vin-supply = <&vcc3v3_sys>; - }; - - vcc5v0_host: vcc5v0-host-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en>; - regulator-name = "vcc5v0_host3"; - regulator-always-on; - }; - - vcc5v0_otg: vcc5v0-otg-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_otg_en>; - regulator-name = "vcc5v0_otg3"; - regulator-always-on; - }; - - vcc5v0_usb2t: vcc5v0-usb2t-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb2t_en>; - regulator-name = "vcc5v0_usb2t"; - regulator-always-on; - }; - - vcc5v0_usb2b: vcc5v0-usb2b-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_usb2b_en>; - regulator-name = "vcc5v0_usb2b"; - regulator-always-on; - }; - - ext_cam_clk: ext-cam-clk { - status = "okay"; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "ext_cam_clk"; - #clock-cells = <0>; - }; - - can_mcp2515_osc: can-mcp2515-osc { - compatible = "fixed-clock"; - clock-frequency = <8000000>; - #clock-cells = <0>; - }; -}; - -&combphy1 { - status = "okay"; -}; - -&combphy2 { - status = "okay"; -}; - -&cpu0 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu1 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu2 { - cpu-supply = <&vdd_cpu>; -}; - -&cpu3 { - cpu-supply = <&vdd_cpu>; -}; - -&gmac1 { - assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "input"; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac1m0_miim - &gmac1m0_tx_bus2 - &gmac1m0_rx_bus2 - &gmac1m0_rgmii_clk - &gmac1m0_clkinout - &gmac1m0_rgmii_bus>; - - snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - /* Reset time is 20ms, 100ms for rtl8211f */ - //snps,reset-delays-us = <0 20000 100000>; - snps,reset-delays-us = <0 50000 200000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - phy-handle = <&rgmii_phy0>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - avdd-0v9-supply = <&vdda0v9_image>; - avdd-1v8-supply = <&vcca1v8_image>; - status = "okay"; -}; - -&hdmi_in { - hdmi_in_vp0: endpoint { - remote-endpoint = <&vp0_out_hdmi>; - }; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&hdmi_sound { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - vdd_cpu: tsc4525@1c { - compatible = "tcs,tcs452x"; - reg = <0x1c>; - vin-supply = <&vcc5v0_sys>; - regulator-compatible = "fan53555-reg"; - regulator-name = "vdd_cpu"; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-init-microvolt = <900000>; - regulator-initial-mode = <1>; - regulator-ramp-delay = <2300>; - fcs,suspend-voltage-selector = <1>; - regulator-boot-on; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - - assigned-clocks = <&cru I2S1_MCLKOUT_TX>; - assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; - #clock-cells = <1>; - clock-names = "mclk"; - clocks = <&cru I2S1_MCLKOUT_TX>; - pinctrl-names = "default", "pmic-sleep", - "pmic-power-off", "pmic-reset"; - pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; - pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>; - pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>; - pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>; - #sound-dai-cells = <0>; - - system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc3v3_sys>; - vcc2-supply = <&vcc3v3_sys>; - vcc3-supply = <&vcc3v3_sys>; - vcc4-supply = <&vcc3v3_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc3v3_sys>; - - pinctrl_rk8xx: pinctrl_rk8xx { - gpio-controller; - #gpio-cells = <2>; - - rk817_slppin_null: rk817_slppin_null { - pins = "gpio_slp"; - function = "pin_fun0"; - }; - - rk817_slppin_slp: rk817_slppin_slp { - pins = "gpio_slp"; - function = "pin_fun1"; - }; - - rk817_slppin_pwrdn: rk817_slppin_pwrdn { - pins = "gpio_slp"; - function = "pin_fun2"; - }; - - rk817_slppin_rst: rk817_slppin_rst { - pins = "gpio_slp"; - function = "pin_fun3"; - }; - }; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_logic"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_gpu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-initial-mode = <0x2>; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vdd_npu: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1350000>; - regulator-init-microvolt = <900000>; - regulator-ramp-delay = <6001>; - regulator-initial-mode = <0x2>; - regulator-name = "vdd_npu"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_image: LDO_REG1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_image"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda_0v9: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda_0v9"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdda0v9_pmu: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-name = "vdda0v9_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <900000>; - }; - }; - - vccio_acodec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vccio_acodec"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_pmu: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc3v3_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcca_1v8: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcca1v8_pmu: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_pmu"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca1v8_image: LDO_REG9 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca1v8_image"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_1v8: DCDC_REG5 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_1v8"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc_3v3: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_3v3"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vcc3v3_sd: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc3v3_sd"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - }; - - codec { - mic-in-differential; - }; - }; -}; - -&i2c2 { - pinctrl-0 = <&i2c2m1_xfer>; -}; - -/* - * i2c3_m0 is exposed on the 40-pin (green connectors) - * pin 27 - i2c3_sda_m0 - * pin 28 - i2c3_scl_m0 - */ -&i2c3 { - status = "okay"; - - tft_tp: ns2009@48 { - compatible = "ti,tsc2007"; - reg = <0x48>; - status = "okay"; - ti,x-plate-ohms = <660>; - ti,rt-thr = <3000>; - ti,fuzzx = <32>; - ti,fuzzy = <16>; - i2c,ignore-nak = <1>; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&i2s1_8ch { - pinctrl-names = "default"; - pinctrl-0 = <&i2s1m0_sclktx - &i2s1m0_lrcktx - &i2s1m0_sdi0 - &i2s1m0_sdo0>; - rockchip,trcm-sync-tx-only; - status = "okay"; -}; - -&spi1 { - pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; - - can_mcp2515: can-mcp2515@0 { - status = "disabled"; - compatible = "microchip,mcp2515"; - reg = <0x00>; - interrupt-parent = <&gpio4>; - interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - spi-max-frequency = <10000000>; - clocks = <&can_mcp2515_osc>; - vdd-supply = <&vcc3v3_sys>; - xceiver-supply = <&vcc3v3_sys>; - pinctrl-names = "default"; - pinctrl-0 = <&mcp2515_int_pin>; - }; - - /* - tft_35: st7789v@1 { - status = "disabled"; - compatible = "sitronix,st7796s"; - reg = <0x01>; - spi-max-frequency = <12500000>; - fps = <60>; - buswidth = <8>; - rotate = <0>; - width = <480>; - height = <320>; - bpp = <24>; - bgr; - regwidth = <8>; - debug = <0>; - txbuflen = <0x2000>; - spi-cpol; - spi-cpha; - dc-gpios = <&gpio0 RK_C7 GPIO_ACTIVE_HIGH>; - }; - */ -}; - -&spi3 { - pinctrl-0 = <&spi3m1_cs0 &spi3m1_pins>; -}; - -&mdio1 { - rgmii_phy0: phy@0 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0x0>; - }; -}; - -&pcie2x1 { - reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pcie_reset_h>; - vpcie3v3-supply = <&vcc3v3_pcie>; - status = "okay"; -}; - -&pinctrl { - wireless-bluetooth { - uart1_gpios: uart1-gpios { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sd { - sdmmc0_pwr_h: sdmmc0-pwr-h { - rockchip,pins = - <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - mxc6655xa { - mxc6655xa_irq_gpio: mxc6655xa_irq_gpio { - rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = - <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = - <0 RK_PA2 1 &pcfg_pull_none>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = - <0 RK_PA2 2 &pcfg_pull_none>; - }; - }; - - touch { - touch_gpio: touch-gpio { - rockchip,pins = - <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - wifi_host_wake: wifi-host-wake-l { - rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - usb { - vcc5v0_host_en: vcc5v0-host-en { - rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_otg_en: vcc5v0-otg-en { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb2t_en: vcc5v0_usb2t-en { - rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - vcc5v0_usb2b_en: vcc5v0-usb2b-en { - rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - work-led { - leds_gpio: leds-gpio { - rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - blue_led: led-blue { - rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - pcie { - pcie_drv: pcie-drv { - rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pcie_reset_h: pcie-reset-h { - rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - edp { - edp_hpd: edp-hpd { - rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - bl_en: bl-en { - rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; - }; - }; - - bt { - bt_enable: bt-enable-h { - rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_host_wake: bt-host-wake-l { - rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; - }; - - bt_wake: bt-wake-l { - rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - mcp2515_int_pin { - mcp2515_int_pin: mcp2515_in_pin { - rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - - /* - * There are 10 independent IO domains in RK3566/RK3568, including PMUIO[0:2] and VCCIO[1:7]. - * 1/ PMUIO0 and PMUIO1 are fixed-level power domains which cannot be configured; - * 2/ PMUIO2 and VCCIO1,VCCIO[3:7] domains require that their hardware power supply voltages - * must be consistent with the software configuration correspondingly - * a/ When the hardware IO level is connected to 1.8V, the software voltage configuration - * should also be configured to 1.8V accordingly; - * b/ When the hardware IO level is connected to 3.3V, the software voltage configuration - * should also be configured to 3.3V accordingly; - * 3/ VCCIO2 voltage control selection (0xFDC20140) - * BIT[0]: 0x0: from GPIO_0A7 (default) - * BIT[0]: 0x1: from GRF - * Default is determined by Pin FLASH_VOL_SEL/GPIO0_A7: - * L:VCCIO2 must supply 3.3V - * H:VCCIO2 must supply 1.8V - */ - -&pmu_io_domains { - status = "okay"; - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vcc_1v8>; - vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - vccio7-supply = <&vcc_3v3>; -}; - -&pwm0 { - pinctrl-0 = <&pwm0m1_pins>; -}; - -&pwm7 { - status = "disabled"; -}; - -&pwm12 { - pinctrl-0 = <&pwm12m1_pins>; -}; - -&pwm13 { - pinctrl-0 = <&pwm13m1_pins>; -}; - -&pwm14 { - pinctrl-0 = <&pwm14m1_pins>; -}; - -&pwm15 { - pinctrl-0 = <&pwm15m1_pins>; -}; - -&saradc { - status = "okay"; - vref-supply = <&vcca_1v8>; -}; - -&sdhci { - bus-width = <8>; - max-frequency = <200000000>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>; - status = "okay"; -}; - -&sdmmc0 { - max-frequency = <150000000>; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - disable-wp; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - status = "okay"; -}; - -&sdmmc1 { - max-frequency = <150000000>; - bus-width = <4>; - disable-wp; - cap-sd-highspeed; - cap-sdio-irq; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; - sd-uhs-sdr104; - status = "okay"; - rockchip,default-sample-phase = <90>; - - sdio-wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <0x1>; - interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "host-wake"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_host_wake>; - brcm,drive-strength = <10>; - }; -}; - -&sfc { - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; -}; - -&tsadc { - status = "okay"; -}; - -&uart1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; - uart-has-rtscts; - dma-names = "tx\0rx"; - - bluetooth { - compatible = "brcm,bcm4345c5"; - clocks = <&rk809 1>; - clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; - //pinctrl-names = "default"; - //pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; - vbat-supply = <&vcc3v3_sys>; - vddio-supply = <&vcca1v8_pmu>; - }; -}; - -/* (debug) uart2 has connectors near the usb-c power, but also on the 40-pin pins 6 (tx) and 8 (rx) - don't wire both */ -&uart2 { - status = "okay"; -}; - -&uart5 { - pinctrl-0 = <&uart5m1_xfer>; -}; - -&uart7 { - pinctrl-0 = <&uart7m2_xfer>; -}; - -&usb2phy0 { - status = "okay"; -}; - -&usb2phy0_host { - phy-supply = <&vcc5v0_host &vcc5v0_otg>; - status = "okay"; -}; - -&usb2phy0_otg { - status = "okay"; -}; - -&usb2phy1 { - status = "okay"; -}; - -&usb2phy1_host { - status = "okay"; - phy-supply = <&vcc5v0_usb2t &vcc5v0_usb2b>; -}; - -&usb2phy1_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&usb_host0_xhci { - dr_mode = "host"; - extcon = <&usb2phy0>; - status = "okay"; -}; - -&usb_host1_ehci { - status = "okay"; -}; - -&usb_host1_ohci { - status = "okay"; -}; - -&usb_host1_xhci { - status = "okay"; -}; - -&vop { - assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; - assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; - status = "okay"; -}; - -&vop_mmu { - status = "okay"; -}; - -&vp0 { - vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { - reg = ; - remote-endpoint = <&hdmi_in_vp0>; - }; -};