diff --git a/patch/kernel/sunxi-next/add-hdmi-net-bits-beelinkx3.patch b/patch/kernel/sunxi-next/add-hdmi-net-bits-beelinkx3.patch
new file mode 100644
index 0000000000..445b91c5dd
--- /dev/null
+++ b/patch/kernel/sunxi-next/add-hdmi-net-bits-beelinkx3.patch
@@ -0,0 +1,141 @@
+diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+old mode 100644
+new mode 100755
+index 10da56e..7d2f879
+--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
++++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+@@ -1,5 +1,6 @@
+ /*
+  * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
++ * Copyright (C) 2018 Armbian
+  *
+  * This file is dual-licensed: you can use it either under the terms
+  * of the GPL or the X11 license, at your option. Note that this dual
+@@ -52,18 +53,27 @@
+ 	compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
+ 
+ 	aliases {
++		ethernet0 = &emac;
+ 		serial0 = &uart0;
+-		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+-		ethernet1 = &sdiowifi;
+ 	};
+ 
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
++	connector {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+-
+ 		blue {
+ 			label = "beelink-x2:blue:pwr";
+ 			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+@@ -76,15 +86,9 @@
+ 		};
+ 	};
+ 
+-	wifi_pwrseq: wifi_pwrseq {
+-		compatible = "mmc-pwrseq-simple";
+-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+-	};
+-
+ 	sound_spdif {
+ 		compatible = "simple-audio-card";
+ 		simple-audio-card,name = "On-board SPDIF";
+-
+ 		simple-audio-card,cpu {
+ 			sound-dai = <&spdif>;
+ 		};
+@@ -100,6 +104,19 @@
+ 	};
+ };
+ 
++&codec {
++	allwinner,audio-routing =
++		"Line Out", "LINEOUT",
++		"MIC1", "Mic",
++		"Mic",  "MBIAS";
++	status = "okay";
++};
++
++&de {
++	status = "okay";
++
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+@@ -108,12 +125,45 @@
+ 	status = "okay";
+ };
+ 
++&ehci2 {
++	status = "okay";
++};
++
++&ehci3 {
++	status = "okay";
++};
++
++&emac {
++	phy-handle = <&int_mii_phy>;
++	phy-mode = "mii";
++	allwinner,leds-active-low;
++	status = "okay";
++};
++
++&hdmi {
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&i2s2 {
++	status = "okay";
++};
++
+ &ir {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&ir_pins_a>;
+ 	status = "okay";
+ };
+ 
++&mixer0 {
++	status = "okay";
++};
++
+ &mmc0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+@@ -164,6 +214,14 @@
+ 	status = "okay";
+ };
+ 
++&sound_hdmi {
++	status = "okay";
++};
++
++&tcon0 {
++	status = "okay";
++};
++
+ &spdif {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&spdif_tx_pins_a>;