diff --git a/config/bootscripts/boot-cubox.cmd b/config/bootscripts/boot-cubox.cmd
index bef7ab5c3b..d0fca10b70 100644
--- a/config/bootscripts/boot-cubox.cmd
+++ b/config/bootscripts/boot-cubox.cmd
@@ -1,28 +1,9 @@
-# DO NOT EDIT THIS FILE
-#
-# Please edit /boot/armbianEnv.txt to set supported parameters
-#
 
-# run board detection
-run autodetectfdt
-
-# default values
 setenv rootdev "/dev/mmcblk0p1"
 
-setenv load_addr "0x10800000"
+run autodetectfdt
 setenv ramdisk_addr 0x14800000
-setenv verbosity "1"
-setenv console "both"
-setenv disp_mode "1920x1080p60"
-
-if load mmc 0 ${load_addr} /boot/armbianEnv.txt || load mmc 0 ${load_addr} armbianEnv.txt; then
-	env import -t ${load_addr} ${filesize}
-fi
-
-if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
-if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=ttymxc0,115200"; fi
-
-setenv bootargs "root=${rootdev} rootfstype=ext4 rootwait ${consoleargs} video=mxcfb0:dev=hdmi,${disp_mode},if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt.global_cursor_default=0 loglevel=${verbosity} ${extraargs}"
+setenv bootargs "root=${rootdev} rootfstype=ext4 rootwait console=ttymxc0,115200 console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt.global_cursor_default=0 quiet loglevel=3 ${extraargs}"
 ext2load mmc 0 ${fdt_addr} /boot/dtb/${fdt_file} || fatload mmc 0 ${fdt_addr} /dtb/${fdt_file} || ext4load mmc 0 ${fdt_addr} /dtb/${fdt_file}
 ext2load mmc 0 ${ramdisk_addr} /boot/uInitrd || fatload mmc 0 ${ramdisk_addr} uInitrd || ext4load mmc 0 ${ramdisk_addr} uInitrd
 ext2load mmc 0 ${loadaddr} /boot/zImage || fatload mmc 0 ${loadaddr} zImage || ext4load mmc 0 ${loadaddr} zImage